From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH] Documentation: boards: stm32mp: describe location of DIP switch
Date: Mon, 1 Jul 2024 10:48:25 +0200 [thread overview]
Message-ID: <20240701084825.3039740-1-a.fatoum@pengutronix.de> (raw)
ChatGPT can explain ASCII art, but without information about the
position, it's not as useful for a blind user.
Extend the docs, so it's more useful in that case.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
Documentation/boards/stm32mp.rst | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/Documentation/boards/stm32mp.rst b/Documentation/boards/stm32mp.rst
index 813117a04f22..2d6e954b79cc 100644
--- a/Documentation/boards/stm32mp.rst
+++ b/Documentation/boards/stm32mp.rst
@@ -205,7 +205,12 @@ SW1 on the DK boards sets boot mode as follows::
DK-1/DK-2
^^^^^^^^^
-Boot mode on the DK board is set as follows::
+Boot mode on the DK board is set via a dual DIP switch on the backside of the PCB
+(under the HDMI port).
+
+If the board is set up, so the HDMI side looks up and the micro-USB side is to
+the left and the backside with the DIP-Switch is to the user, it can be configured
+as follows:
+-------+
BOOT2 | O O-- |
--
2.39.2
next reply other threads:[~2024-07-01 8:49 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-01 8:48 Ahmad Fatoum [this message]
2024-07-01 8:56 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240701084825.3039740-1-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox