From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 10/10] commands: blkstats: add command to print block device statistics
Date: Tue, 30 Jul 2024 09:19:29 +0200 [thread overview]
Message-ID: <20240730071929.2016537-11-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20240730071929.2016537-1-a.fatoum@pengutronix.de>
To test proper operations of block device operations, add a command that
prints how many sectors were read/written/erased for a device so far.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
commands/Kconfig | 11 +++++++++
commands/Makefile | 1 +
commands/blkstats.c | 60 +++++++++++++++++++++++++++++++++++++++++++++
common/Kconfig | 3 +++
common/block.c | 46 ++++++++++++++++++++++++++++------
include/block.h | 10 ++++++++
6 files changed, 123 insertions(+), 8 deletions(-)
create mode 100644 commands/blkstats.c
diff --git a/commands/Kconfig b/commands/Kconfig
index a8b7037618cc..64e834d95a8f 100644
--- a/commands/Kconfig
+++ b/commands/Kconfig
@@ -255,6 +255,17 @@ config CMD_REGINFO
help
Print register information.
+config CMD_BLKSTATS
+ bool
+ depends on BLOCK
+ select BLOCK_STATS
+ prompt "blkstats command"
+ help
+ The blkstats displays statistics about a block devices' number of
+ sectors read, written and erased. This should only be needed for
+ development. Saying y here will start to collect these statistics
+ and enable a command for querying them.
+
config CMD_REGULATOR
bool
depends on REGULATOR
diff --git a/commands/Makefile b/commands/Makefile
index a9dbead4389f..ff5d713ca72c 100644
--- a/commands/Makefile
+++ b/commands/Makefile
@@ -125,6 +125,7 @@ obj-$(CONFIG_CMD_DRVINFO) += drvinfo.o
obj-$(CONFIG_CMD_READF) += readf.o
obj-$(CONFIG_CMD_MENUTREE) += menutree.o
obj-$(CONFIG_CMD_2048) += 2048.o
+obj-$(CONFIG_CMD_BLKSTATS) += blkstats.o
obj-$(CONFIG_CMD_REGULATOR) += regulator.o
obj-$(CONFIG_CMD_PM_DOMAIN) += pm_domain.o
obj-$(CONFIG_CMD_LSPCI) += lspci.o
diff --git a/commands/blkstats.c b/commands/blkstats.c
new file mode 100644
index 000000000000..69bed8b40e95
--- /dev/null
+++ b/commands/blkstats.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <common.h>
+#include <command.h>
+#include <block.h>
+#include <getopt.h>
+#include <fs.h>
+
+static int do_blkstats(int argc, char *argv[])
+{
+ struct block_device *blk;
+ const char *name;
+ int opt;
+
+ while ((opt = getopt(argc, argv, "l")) > 0) {
+ switch (opt) {
+ case 'l':
+ for_each_block_device(blk) {
+ printf("%s\n", blk->cdev.name);
+ }
+ default:
+ return COMMAND_ERROR_USAGE;
+ }
+ }
+
+ argv += optind;
+ argc -= optind;
+
+ name = argv[0];
+
+ for_each_block_device(blk) {
+ struct block_device_stats *stats;
+
+ if (name && strcmp(name, blk->cdev.name))
+ continue;
+
+ stats = &blk->stats;
+
+ printf("%-10s %10s %10s %10s\n", "Device", "Read", "Write", "Erase");
+ printf("%-10s %10llu %10llu %10llu\n", blk->cdev.name,
+ stats->read_sectors, stats->write_sectors, stats->erase_sectors);
+ }
+
+ return 0;
+}
+
+BAREBOX_CMD_HELP_START(blkstats)
+BAREBOX_CMD_HELP_TEXT("Display a block device's number of read, written and erased sectors")
+BAREBOX_CMD_HELP_TEXT("")
+BAREBOX_CMD_HELP_TEXT("Options:")
+BAREBOX_CMD_HELP_OPT("-l", "list all currently registered block devices")
+BAREBOX_CMD_HELP_END
+
+BAREBOX_CMD_START(blkstats)
+ .cmd = do_blkstats,
+ BAREBOX_CMD_DESC("display block layer statistics")
+ BAREBOX_CMD_OPTS("[-l] [DEVICE]")
+ BAREBOX_CMD_GROUP(CMD_GRP_INFO)
+ BAREBOX_CMD_HELP(cmd_blkstats_help)
+BAREBOX_CMD_END
diff --git a/common/Kconfig b/common/Kconfig
index fea26262da86..4500feb66c92 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -41,6 +41,9 @@ config BLOCK
config BLOCK_WRITE
bool
+config BLOCK_STATS
+ bool
+
config FILETYPE
bool
diff --git a/common/block.c b/common/block.c
index b43fcbe6927b..92124a415cd9 100644
--- a/common/block.c
+++ b/common/block.c
@@ -31,19 +31,40 @@ static int writebuffer_io_len(struct block_device *blk, struct chunk *chunk)
return min_t(blkcnt_t, blk->rdbufsize, blk->num_blocks - chunk->block_start);
}
+#ifdef CONFIG_BLOCK_STATS
+static void blk_stats_record_read(struct block_device *blk, blkcnt_t count)
+{
+ blk->stats.read_sectors += count;
+}
+static void blk_stats_record_write(struct block_device *blk, blkcnt_t count)
+{
+ blk->stats.write_sectors += count;
+}
+static void blk_stats_record_erase(struct block_device *blk, blkcnt_t count)
+{
+ blk->stats.erase_sectors += count;
+}
+#else
+static void blk_stats_record_read(struct block_device *blk, blkcnt_t count) { }
+static void blk_stats_record_write(struct block_device *blk, blkcnt_t count) { }
+static void blk_stats_record_erase(struct block_device *blk, blkcnt_t count) { }
+#endif
+
static int chunk_flush(struct block_device *blk, struct chunk *chunk)
{
+ size_t len;
int ret;
if (!chunk->dirty)
return 0;
- ret = blk->ops->write(blk, chunk->data,
- chunk->block_start,
- writebuffer_io_len(blk, chunk));
+ len = writebuffer_io_len(blk, chunk);
+ ret = blk->ops->write(blk, chunk->data, chunk->block_start, len);
if (ret < 0)
return ret;
+ blk_stats_record_write(blk, len);
+
chunk->dirty = 0;
return 0;
@@ -144,6 +165,7 @@ static struct chunk *get_chunk(struct block_device *blk)
static int block_cache(struct block_device *blk, sector_t block)
{
struct chunk *chunk;
+ size_t len;
int ret;
chunk = get_chunk(blk);
@@ -155,20 +177,22 @@ static int block_cache(struct block_device *blk, sector_t block)
dev_dbg(blk->dev, "%s: %llu to %d\n", __func__, chunk->block_start,
chunk->num);
+ len = writebuffer_io_len(blk, chunk);
if (chunk->block_start * BLOCKSIZE(blk) >= blk->discard_start &&
- chunk->block_start * BLOCKSIZE(blk) + writebuffer_io_len(blk, chunk)
+ chunk->block_start * BLOCKSIZE(blk) + len
<= blk->discard_start + blk->discard_size) {
- memset(chunk->data, 0, writebuffer_io_len(blk, chunk));
+ memset(chunk->data, 0, len);
list_add(&chunk->list, &blk->buffered_blocks);
return 0;
}
- ret = blk->ops->read(blk, chunk->data, chunk->block_start,
- writebuffer_io_len(blk, chunk));
+ ret = blk->ops->read(blk, chunk->data, chunk->block_start, len);
if (ret) {
list_add_tail(&chunk->list, &blk->idle_blocks);
return ret;
}
+
+ blk_stats_record_read(blk, len);
list_add(&chunk->list, &blk->buffered_blocks);
return 0;
@@ -411,7 +435,13 @@ static __maybe_unused int block_op_erase(struct cdev *cdev, loff_t count, loff_t
}
}
- return blk->ops->erase(blk, offset, count);
+ ret = blk->ops->erase(blk, offset, count);
+ if (ret)
+ return ret;
+
+ blk_stats_record_erase(blk, count);
+
+ return 0;
}
static struct cdev_operations block_ops = {
diff --git a/include/block.h b/include/block.h
index eb319b953d32..b57d99a3fc08 100644
--- a/include/block.h
+++ b/include/block.h
@@ -31,6 +31,12 @@ enum blk_type {
const char *blk_type_str(enum blk_type);
+struct block_device_stats {
+ blkcnt_t read_sectors;
+ blkcnt_t write_sectors;
+ blkcnt_t erase_sectors;
+};
+
struct block_device {
struct device *dev;
struct list_head list;
@@ -50,6 +56,10 @@ struct block_device {
struct cdev cdev;
bool need_reparse;
+
+#ifdef CONFIG_BLOCK_STATS
+ struct block_device_stats stats;
+#endif
};
#define BLOCKSIZE(blk) (1u << (blk)->blockbits)
--
2.39.2
prev parent reply other threads:[~2024-07-30 7:45 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-30 7:19 [PATCH 00/10] mmc: add SD/eMMC erase support Ahmad Fatoum
2024-07-30 7:19 ` [PATCH 01/10] fs: give erase() a new erase_type parameter Ahmad Fatoum
2024-07-30 8:31 ` Sascha Hauer
2024-07-30 8:32 ` Ahmad Fatoum
2024-07-30 7:19 ` [PATCH 02/10] block: factor out chunk_flush helper Ahmad Fatoum
2024-07-30 7:19 ` [PATCH 03/10] block: allow block devices to implement the cdev erase operation Ahmad Fatoum
2024-07-30 8:55 ` Sascha Hauer
2024-07-30 11:10 ` Ahmad Fatoum
2024-07-30 11:21 ` Sascha Hauer
2024-07-30 7:19 ` [PATCH 04/10] mci: turn bool members into bitfield in struct mci Ahmad Fatoum
2024-07-30 9:06 ` Sascha Hauer
2024-07-30 11:10 ` Ahmad Fatoum
2024-07-30 7:19 ` [PATCH 05/10] mci: describe more command structure in mci.h Ahmad Fatoum
2024-07-30 9:25 ` Yann Sionneau
2024-07-30 11:07 ` Ahmad Fatoum
2024-07-30 7:19 ` [PATCH 06/10] mci: core: use CONFIG_MCI_WRITE, not CONFIG_BLOCK_WRITE Ahmad Fatoum
2024-07-30 9:18 ` Sascha Hauer
2024-07-30 11:08 ` Ahmad Fatoum
2024-07-31 7:19 ` Ahmad Fatoum
2024-07-30 7:19 ` [PATCH 07/10] mci: add support for discarding write blocks Ahmad Fatoum
2024-07-30 9:23 ` Yann Sionneau
2024-07-30 11:14 ` Ahmad Fatoum
2024-07-30 10:05 ` Sascha Hauer
2024-07-30 11:17 ` Ahmad Fatoum
2024-07-30 7:19 ` [PATCH 08/10] commands: sync: add new command to flush cached writes Ahmad Fatoum
2024-07-30 10:08 ` Sascha Hauer
2024-07-30 7:19 ` [PATCH 09/10] mci: core: remove reference to SD Card from common mci_card_probe Ahmad Fatoum
2024-07-30 10:09 ` Sascha Hauer
2024-07-30 7:19 ` Ahmad Fatoum [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240730071929.2016537-11-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox