From mboxrd@z Thu Jan 1 00:00:00 1970 Delivery-date: Thu, 26 Sep 2024 15:16:02 +0200 Received: from metis.whiteo.stw.pengutronix.de ([2a0a:edc0:2:b01:1d::104]) by lore.white.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.96) (envelope-from ) id 1stoLh-0030rf-2U for lore@lore.pengutronix.de; Thu, 26 Sep 2024 15:16:02 +0200 Received: from bombadil.infradead.org ([2607:7c80:54:3::133]) by metis.whiteo.stw.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1stoLe-0005lk-80 for lore@pengutronix.de; Thu, 26 Sep 2024 15:16:02 +0200 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:To:In-Reply-To:References: Message-Id:Content-Transfer-Encoding:Content-Type:MIME-Version:Subject:Date: From:Reply-To:Cc:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=6djYQjVnsf6j9lv/pevthtMAr6HXB0MvFNspHz8LH+8=; b=35YkNNgcbR7FnmCc/pI4rO640D c5VYKAeUqENFwOpvb5d4TpDrjFcv3FVXwK3TShhd/OaTUYTodCtC13fnErsi0wybF6BDOnJNd1p3D P7AE504yNuQdok7a/H8ixSKuFQg3TSR94oELOwoG8DAI4tgSnCNtzAOQi+NzRAaNqPYdofBroJHJS AGB3fvhbm/+s46pMhLVPANJL7cuNBtTeKeo6AOyjXGJm/eY+TOBFd7HdgBRD3rw6zsVId1FB+t60I IkXzc7D6yeabOqtmWpJ5MsHY1mak0AuzzVMitjNzSMqghuD4VkOnDDOjRB4Rdx2FB2b/UUp/+EDUF fviZkWzg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.98 #2 (Red Hat Linux)) id 1stoKw-00000008QzR-3vSB; Thu, 26 Sep 2024 13:15:14 +0000 Received: from metis.whiteo.stw.pengutronix.de ([2a0a:edc0:2:b01:1d::104]) by bombadil.infradead.org with esmtps (Exim 4.98 #2 (Red Hat Linux)) id 1stoKn-00000008Qvv-3VdP for barebox@lists.infradead.org; Thu, 26 Sep 2024 13:15:10 +0000 Received: from drehscheibe.grey.stw.pengutronix.de ([2a0a:edc0:0:c01:1d::a2]) by metis.whiteo.stw.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1stoKl-0004uq-Ps; Thu, 26 Sep 2024 15:15:03 +0200 Received: from [2a0a:edc0:0:1101:1d::28] (helo=dude02.red.stw.pengutronix.de) by drehscheibe.grey.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1stoKl-001h7E-5N; Thu, 26 Sep 2024 15:15:03 +0200 Received: from localhost ([::1] helo=dude02.red.stw.pengutronix.de) by dude02.red.stw.pengutronix.de with esmtp (Exim 4.96) (envelope-from ) id 1stoKl-00GZyn-1g; Thu, 26 Sep 2024 15:15:03 +0200 From: Sascha Hauer Date: Thu, 26 Sep 2024 15:15:03 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20240926-vop2-v1-5-fe0581f2020b@pengutronix.de> References: <20240926-vop2-v1-0-fe0581f2020b@pengutronix.de> In-Reply-To: <20240926-vop2-v1-0-fe0581f2020b@pengutronix.de> To: "open list:BAREBOX" X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=ed25519-sha256; t=1727356502; l=16204; i=s.hauer@pengutronix.de; s=20230412; h=from:subject:message-id; bh=A3Ajykg3EDsi4gKV7BXWHC8Kvd8FfFUOmTKr9TCZGZo=; b=tDF9/LkMkM3AlGqJyS0hWM+hAONoE+A4rS1lGPz0lFS5zkj0uYOklMBZxceecRzr77kVLOilG rIMp3mj2JvDD+eLzY8BS8LdjDXiZC5K3FJvNb9IZNkWgrARrUJQDqmo X-Developer-Key: i=s.hauer@pengutronix.de; a=ed25519; pk=4kuc9ocmECiBJKWxYgqyhtZOHj5AWi7+d0n/UjhkwTg= X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240926_061506_281943_45F1EA73 X-CRM114-Status: GOOD ( 30.85 ) X-BeenThere: barebox@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "barebox" X-SA-Exim-Connect-IP: 2607:7c80:54:3::133 X-SA-Exim-Mail-From: barebox-bounces+lore=pengutronix.de@lists.infradead.org X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on metis.whiteo.stw.pengutronix.de X-Spam-Level: X-Spam-Status: No, score=-4.0 required=4.0 tests=AWL,BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_NONE autolearn=unavailable autolearn_force=no version=3.4.2 Subject: [PATCH 05/13] video: add include/video/drm/drm_connector.h X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on metis.whiteo.stw.pengutronix.de) drm_connector.h from Linux contains several defines and struct types useful for porting over DRM drivers to barebox. This is based on Linux-6.10. Signed-off-by: Sascha Hauer --- include/video/drm/drm_connector.h | 502 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 502 insertions(+) diff --git a/include/video/drm/drm_connector.h b/include/video/drm/drm_connector.h new file mode 100644 index 0000000000..53ec7d3b79 --- /dev/null +++ b/include/video/drm/drm_connector.h @@ -0,0 +1,502 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef __DRM_CONNECTOR_H__ +#define __DRM_CONNECTOR_H__ + +#include + +enum drm_connector_force { + DRM_FORCE_UNSPECIFIED, + DRM_FORCE_OFF, + DRM_FORCE_ON, /* force on analog part normally */ + DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */ +}; + +/** + * enum drm_connector_status - status for a &drm_connector + * + * This enum is used to track the connector status. There are no separate + * #defines for the uapi! + */ +enum drm_connector_status { + /** + * @connector_status_connected: The connector is definitely connected to + * a sink device, and can be enabled. + */ + connector_status_connected = 1, + /** + * @connector_status_disconnected: The connector isn't connected to a + * sink device which can be autodetect. For digital outputs like DP or + * HDMI (which can be realiable probed) this means there's really + * nothing there. It is driver-dependent whether a connector with this + * status can be lit up or not. + */ + connector_status_disconnected = 2, + /** + * @connector_status_unknown: The connector's status could not be + * reliably detected. This happens when probing would either cause + * flicker (like load-detection when the connector is in use), or when a + * hardware resource isn't available (like when load-detection needs a + * free CRTC). It should be possible to light up the connector with one + * of the listed fallback modes. For default configuration userspace + * should only try to light up connectors with unknown status when + * there's not connector with @connector_status_connected. + */ + connector_status_unknown = 3, +}; + +/** + * struct drm_scrambling: sink's scrambling support. + */ +struct drm_scrambling { + /** + * @supported: scrambling supported for rates > 340 Mhz. + */ + bool supported; + /** + * @low_rates: scrambling supported for rates <= 340 Mhz. + */ + bool low_rates; +}; + +/* + * struct drm_scdc - Information about scdc capabilities of a HDMI 2.0 sink + * + * Provides SCDC register support and capabilities related information on a + * HDMI 2.0 sink. In case of a HDMI 1.4 sink, all parameter must be 0. + */ +struct drm_scdc { + /** + * @supported: status control & data channel present. + */ + bool supported; + /** + * @read_request: sink is capable of generating scdc read request. + */ + bool read_request; + /** + * @scrambling: sink's scrambling capabilities + */ + struct drm_scrambling scrambling; +}; + +/** + * struct drm_hdmi_dsc_cap - DSC capabilities of HDMI sink + * + * Describes the DSC support provided by HDMI 2.1 sink. + * The information is fetched fom additional HFVSDB blocks defined + * for HDMI 2.1. + */ +struct drm_hdmi_dsc_cap { + /** @v_1p2: flag for dsc1.2 version support by sink */ + bool v_1p2; + + /** @native_420: Does sink support DSC with 4:2:0 compression */ + bool native_420; + + /** + * @all_bpp: Does sink support all bpp with 4:4:4: or 4:2:2 + * compressed formats + */ + bool all_bpp; + + /** + * @bpc_supported: compressed bpc supported by sink : 10, 12 or 16 bpc + */ + u8 bpc_supported; + + /** @max_slices: maximum number of Horizontal slices supported by */ + u8 max_slices; + + /** @clk_per_slice : max pixel clock in MHz supported per slice */ + int clk_per_slice; + + /** @max_lanes : dsc max lanes supported for Fixed rate Link training */ + u8 max_lanes; + + /** @max_frl_rate_per_lane : maximum frl rate with DSC per lane */ + u8 max_frl_rate_per_lane; + + /** @total_chunk_kbytes: max size of chunks in KBs supported per line*/ + u8 total_chunk_kbytes; +}; + +/** + * struct drm_hdmi_info - runtime information about the connected HDMI sink + * + * Describes if a given display supports advanced HDMI 2.0 features. + * This information is available in CEA-861-F extension blocks (like HF-VSDB). + */ +struct drm_hdmi_info { + /** @scdc: sink's scdc support and capabilities */ + struct drm_scdc scdc; + + /** + * @y420_vdb_modes: bitmap of modes which can support ycbcr420 + * output only (not normal RGB/YCBCR444/422 outputs). The max VIC + * defined by the CEA-861-G spec is 219, so the size is 256 bits to map + * up to 256 VICs. + */ + unsigned long y420_vdb_modes[BITS_TO_LONGS(256)]; + + /** + * @y420_cmdb_modes: bitmap of modes which can support ycbcr420 + * output also, along with normal HDMI outputs. The max VIC defined by + * the CEA-861-G spec is 219, so the size is 256 bits to map up to 256 + * VICs. + */ + unsigned long y420_cmdb_modes[BITS_TO_LONGS(256)]; + + /** @y420_dc_modes: bitmap of deep color support index */ + u8 y420_dc_modes; + + /** @max_frl_rate_per_lane: support fixed rate link */ + u8 max_frl_rate_per_lane; + + /** @max_lanes: supported by sink */ + u8 max_lanes; + + /** @dsc_cap: DSC capabilities of the sink */ + struct drm_hdmi_dsc_cap dsc_cap; +}; + +/** + * enum drm_panel_orientation - panel_orientation info for &drm_display_info + * + * This enum is used to track the (LCD) panel orientation. There are no + * separate #defines for the uapi! + * + * @DRM_MODE_PANEL_ORIENTATION_UNKNOWN: The drm driver has not provided any + * panel orientation information (normal + * for non panels) in this case the "panel + * orientation" connector prop will not be + * attached. + * @DRM_MODE_PANEL_ORIENTATION_NORMAL: The top side of the panel matches the + * top side of the device's casing. + * @DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: The top side of the panel matches the + * bottom side of the device's casing, iow + * the panel is mounted upside-down. + * @DRM_MODE_PANEL_ORIENTATION_LEFT_UP: The left side of the panel matches the + * top side of the device's casing. + * @DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: The right side of the panel matches the + * top side of the device's casing. + */ +enum drm_panel_orientation { + DRM_MODE_PANEL_ORIENTATION_UNKNOWN = -1, + DRM_MODE_PANEL_ORIENTATION_NORMAL = 0, + DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, + DRM_MODE_PANEL_ORIENTATION_LEFT_UP, + DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, +}; + +/** + * enum drm_bus_flags - bus_flags info for &drm_display_info + * + * This enum defines signal polarities and clock edge information for signals on + * a bus as bitmask flags. + * + * The clock edge information is conveyed by two sets of symbols, + * DRM_BUS_FLAGS_*_DRIVE_\* and DRM_BUS_FLAGS_*_SAMPLE_\*. When this enum is + * used to describe a bus from the point of view of the transmitter, the + * \*_DRIVE_\* flags should be used. When used from the point of view of the + * receiver, the \*_SAMPLE_\* flags should be used. The \*_DRIVE_\* and + * \*_SAMPLE_\* flags alias each other, with the \*_SAMPLE_POSEDGE and + * \*_SAMPLE_NEGEDGE flags being equal to \*_DRIVE_NEGEDGE and \*_DRIVE_POSEDGE + * respectively. This simplifies code as signals are usually sampled on the + * opposite edge of the driving edge. Transmitters and receivers may however + * need to take other signal timings into account to convert between driving + * and sample edges. + */ +enum drm_bus_flags { + /** + * @DRM_BUS_FLAG_DE_LOW: + * + * The Data Enable signal is active low + */ + DRM_BUS_FLAG_DE_LOW = BIT(0), + + /** + * @DRM_BUS_FLAG_DE_HIGH: + * + * The Data Enable signal is active high + */ + DRM_BUS_FLAG_DE_HIGH = BIT(1), + + /** + * @DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE: + * + * Data is driven on the rising edge of the pixel clock + */ + DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE = BIT(2), + + /** + * @DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE: + * + * Data is driven on the falling edge of the pixel clock + */ + DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE = BIT(3), + + /** + * @DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE: + * + * Data is sampled on the rising edge of the pixel clock + */ + DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, + + /** + * @DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE: + * + * Data is sampled on the falling edge of the pixel clock + */ + DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, + + /** + * @DRM_BUS_FLAG_DATA_MSB_TO_LSB: + * + * Data is transmitted MSB to LSB on the bus + */ + DRM_BUS_FLAG_DATA_MSB_TO_LSB = BIT(4), + + /** + * @DRM_BUS_FLAG_DATA_LSB_TO_MSB: + * + * Data is transmitted LSB to MSB on the bus + */ + DRM_BUS_FLAG_DATA_LSB_TO_MSB = BIT(5), + + /** + * @DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE: + * + * Sync signals are driven on the rising edge of the pixel clock + */ + DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE = BIT(6), + + /** + * @DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE: + * + * Sync signals are driven on the falling edge of the pixel clock + */ + DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE = BIT(7), + + /** + * @DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE: + * + * Sync signals are sampled on the rising edge of the pixel clock + */ + DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE = DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE, + + /** + * @DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE: + * + * Sync signals are sampled on the falling edge of the pixel clock + */ + DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE = DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, + + /** + * @DRM_BUS_FLAG_SHARP_SIGNALS: + * + * Set if the Sharp-specific signals (SPL, CLS, PS, REV) must be used + */ + DRM_BUS_FLAG_SHARP_SIGNALS = BIT(8), +}; + +/** + * struct drm_display_info - runtime data about the connected sink + * + * Describes a given display (e.g. CRT or flat panel) and its limitations. For + * fixed display sinks like built-in panels there's not much difference between + * this and &struct drm_connector. But for sinks with a real cable this + * structure is meant to describe all the things at the other end of the cable. + * + * For sinks which provide an EDID this can be filled out by calling + * drm_add_edid_modes(). + */ +struct drm_display_info { + /** + * @width_mm: Physical width in mm. + */ + unsigned int width_mm; + + /** + * @height_mm: Physical height in mm. + */ + unsigned int height_mm; + + /** + * @bpc: Maximum bits per color channel. Used by HDMI and DP outputs. + */ + unsigned int bpc; + +#define DRM_COLOR_FORMAT_RGB444 (1<<0) +#define DRM_COLOR_FORMAT_YCBCR444 (1<<1) +#define DRM_COLOR_FORMAT_YCBCR422 (1<<2) +#define DRM_COLOR_FORMAT_YCBCR420 (1<<3) + + /** + * @panel_orientation: Read only connector property for built-in panels, + * indicating the orientation of the panel vs the device's casing. + * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN. + * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the + * fb to compensate and gets exported as prop to userspace. + */ + int panel_orientation; + + /** + * @color_formats: HDMI Color formats, selects between RGB and YCrCb + * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones + * as used to describe the pixel format in framebuffers, and also don't + * match the formats in @bus_formats which are shared with v4l. + */ + u32 color_formats; + + /** + * @bus_formats: Pixel data format on the wire, somewhat redundant with + * @color_formats. Array of size @num_bus_formats encoded using + * MEDIA_BUS_FMT\_ defines shared with v4l and media drivers. + */ + const u32 *bus_formats; + /** + * @num_bus_formats: Size of @bus_formats array. + */ + unsigned int num_bus_formats; + + /** + * @bus_flags: Additional information (like pixel signal polarity) for + * the pixel data on the bus, using &enum drm_bus_flags values + * DRM_BUS_FLAGS\_. + */ + u32 bus_flags; + + /** + * @max_tmds_clock: Maximum TMDS clock rate supported by the + * sink in kHz. 0 means undefined. + */ + int max_tmds_clock; + + /** + * @dvi_dual: Dual-link DVI sink? + */ + bool dvi_dual; + + /** + * @is_hdmi: True if the sink is an HDMI device. + * + * This field shall be used instead of calling + * drm_detect_hdmi_monitor() when possible. + */ + bool is_hdmi; + + /** + * @has_audio: True if the sink supports audio. + * + * This field shall be used instead of calling + * drm_detect_monitor_audio() when possible. + */ + bool has_audio; + + /** + * @has_hdmi_infoframe: Does the sink support the HDMI infoframe? + */ + bool has_hdmi_infoframe; + + /** + * @rgb_quant_range_selectable: Does the sink support selecting + * the RGB quantization range? + */ + bool rgb_quant_range_selectable; + + /** + * @edid_hdmi_rgb444_dc_modes: Mask of supported hdmi deep color modes + * in RGB 4:4:4. Even more stuff redundant with @bus_formats. + */ + u8 edid_hdmi_rgb444_dc_modes; + + /** + * @edid_hdmi_ycbcr444_dc_modes: Mask of supported hdmi deep color + * modes in YCbCr 4:4:4. Even more stuff redundant with @bus_formats. + */ + u8 edid_hdmi_ycbcr444_dc_modes; + + /** + * @cea_rev: CEA revision of the HDMI sink. + */ + u8 cea_rev; + + /** + * @hdmi: advance features of a HDMI sink. + */ + struct drm_hdmi_info hdmi; + + /** + * @non_desktop: Non desktop display (HMD). + */ + bool non_desktop; + + /** + * @mso_stream_count: eDP Multi-SST Operation (MSO) stream count from + * the DisplayID VESA vendor block. 0 for conventional Single-Stream + * Transport (SST), or 2 or 4 MSO streams. + */ + u8 mso_stream_count; + + /** + * @mso_pixel_overlap: eDP MSO segment pixel overlap, 0-8 pixels. + */ + u8 mso_pixel_overlap; + + /** + * @max_dsc_bpp: Maximum DSC target bitrate, if it is set to 0 the + * monitor's default value is used instead. + */ + u32 max_dsc_bpp; + + /** + * @vics: Array of vics_len VICs. Internal to EDID parsing. + */ + u8 *vics; + + /** + * @vics_len: Number of elements in vics. Internal to EDID parsing. + */ + int vics_len; + + /** + * @quirks: EDID based quirks. Internal to EDID parsing. + */ + u32 quirks; + + /** + * @source_physical_address: Source Physical Address from HDMI + * Vendor-Specific Data Block, for CEC usage. + * + * Defaults to CEC_PHYS_ADDR_INVALID (0xffff). + */ + u16 source_physical_address; +}; + +int drm_display_info_set_bus_formats(struct drm_display_info *info, + const u32 *formats, + unsigned int num_formats); + + +#endif -- 2.39.5