mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH] clk: imx: improve precision of AV PLL to 1 Hz
@ 2024-09-26 11:33 Sascha Hauer
  2024-09-27 10:40 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Sascha Hauer @ 2024-09-26 11:33 UTC (permalink / raw)
  To: Barebox List

Adoption of Linux commit:

| commit c5a8045a553e32529ffb6bfb33fcad4d38aec2c7
| Author: Emil Lundmark <emil@limesaudio.com>
| Date:   Wed Oct 12 12:31:41 2016 +0200
|
|     clk: imx: improve precision of AV PLL to 1 Hz
|
|     The audio and video PLLs are designed to have a precision of 1 Hz if some
|     conditions are met. The current implementation only allows a precision that
|     depends on the rate of the parent clock. E.g., if the parent clock is 24
|     MHz, the precision will be 24 Hz; or more generally the precision will be
|
|         p / 10^6 Hz
|
|     where p is the parent clock rate. This comes down to how the register
|     values for the PLL's fractional loop divider are chosen.
|
|     The clock rate calculation for the PLL is
|
|         PLL output frequency = Fref * (DIV_SELECT + NUM / DENOM)
|
|     or with a shorter notation
|
|         r = p * (d + a / b)
|
|     In addition to all variables being integers, we also have the following
|     conditions:
|
|         27 <= d <= 54
|
|         -2^29 <= a <= 2^29-1
|          0    <  b <= 2^30-1
|         |a| < b
|
|     Here, d, a and b are register values for the fractional loop divider. We
|     want to chose d, a and b such that f(p, r) = p, i.e. f is our round_rate
|     function. Currently, d and b are chosen as
|
|         d = r / p
|         b = 10^6
|
|     hence we get the poor precision. And a is defined in terms of r, d, p and
|     b:
|
|         a = (r - d * p) * b / p
|
|     I propose that if p <= 2^30-1 (i.e., the max value for b), we chose b as
|
|         b = p
|
|     We can do this since
|
|         |a| < b
|
|         |(r - d * p) * b / p| < b
|
|         |r - d * p| < p
|
|     Which have two solutions, one of them is when p < 0, so we can skip that
|     one. The other is when p > 0 and
|
|         p * (d - 1) < r < p * (d + 1)
|
|     Substitute d = r / p:
|
|         (r - p) < r < (r + p)  <=>  p > 0
|
|     So, as long as p > 0, we can chose b = p. This is a good choise for b since
|
|         a = (r - d * p) * b / p
|           = (r - d * p) * p / p
|           = r - d * p
|
|         r = p * (d + a / b)
|           = p * d + p * a / b
|           = p * d + p * a / p
|           = p * d + a
|
|     and if d = r / p:
|
|         a = r - d * p
|           = r - r / p * p
|           = 0
|
|         r = p * d + a
|           = p * d + 0
|           = p * r / p
|           = r
|
|     I reckon this is the intention by the design of the clock rate formula.
|
|     Signed-off-by: Emil Lundmark <emil@limesaudio.com>
|     Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
|     Acked-by: Shawn Guo <shawnguo@kernel.org>
|     Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This patch helps getting the correct frequency out of the HDMI clock on
an i.MX6. Without it it happens that the PLL sets a frequency that is a
few HZ too high. A clk_set_rate() on the HDMI clock then increases the
divider value to the next value because the resulting frequency would
also be a few HZ too high otherwise.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/imx/clk-pllv3.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
index cb1d65058f..eb806e7f98 100644
--- a/drivers/clk/imx/clk-pllv3.c
+++ b/drivers/clk/imx/clk-pllv3.c
@@ -203,6 +203,7 @@ static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate,
 	unsigned long max_rate = parent_rate * 54;
 	u32 div;
 	u32 mfn, mfd = 1000000;
+	u32 max_mfd = 0x3FFFFFFF;
 	u64 temp64;
 
 	if (rate > max_rate)
@@ -210,6 +211,9 @@ static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate,
 	else if (rate < min_rate)
 		rate = min_rate;
 
+	if (parent_rate <= max_mfd)
+		mfd = parent_rate;
+
 	div = rate / parent_rate;
 	temp64 = (u64) (rate - div * parent_rate);
 	temp64 *= mfd;
@@ -228,11 +232,15 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
 	unsigned long max_rate = parent_rate * 54;
 	u32 val, div;
 	u32 mfn, mfd = 1000000;
+	u32 max_mfd = 0x3FFFFFFF;
 	u64 temp64;
 
 	if (rate < min_rate || rate > max_rate)
 		return -EINVAL;
 
+	if (parent_rate <= max_mfd)
+		mfd = parent_rate;
+
 	div = rate / parent_rate;
 	temp64 = (u64) (rate - div * parent_rate);
 	temp64 *= mfd;
-- 
2.39.5




^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2024-09-27 10:43 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-09-26 11:33 [PATCH] clk: imx: improve precision of AV PLL to 1 Hz Sascha Hauer
2024-09-27 10:40 ` Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox