[PATCH 0/7] ARM: K3: add AM625 ethernet support

[Sascha Hauer <s.hauer@pengutronix.de>]

This series adds ethernet support for TI K3 SoCs. The driver has been
tested on the TI AM625 based Beagleplay board. The driver needs an
external DMA engine and also some TI specific units, so this series is
longer than it should be for just an ethernet driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
Sascha Hauer (7):
      net: davinci_mdio: separate driver
      firmware: ti_sci: update from U-Boot
      ARM: K3: add navss-ringacc driver
      dma: add dma-devices support
      dma-devices: add k3-udma support
      ARM: k3: am625: add syscon compatible to phy_gmii_sel
      net: add am65-cpsw-nuss driver

 arch/arm/dts/k3-am625-beagleplay.dts |    1 +
 arch/arm/dts/k3-am625.dtsi           |    5 +
 drivers/dma/Kconfig                  |   13 +
 drivers/dma/Makefile                 |    3 +
 drivers/dma/dma-devices.c            |  210 +++
 drivers/dma/ti/Kconfig               |    6 +
 drivers/dma/ti/Makefile              |    1 +
 drivers/dma/ti/k3-psil-priv.h        |   49 +
 drivers/dma/ti/k3-psil.c             |   89 +
 drivers/dma/ti/k3-psil.h             |   83 +
 drivers/dma/ti/k3-udma-hwdef.h       |  185 +++
 drivers/dma/ti/k3-udma.c             | 2984 ++++++++++++++++++++++++++++++++++
 drivers/firmware/ti_sci.c            |  276 +++-
 drivers/firmware/ti_sci.h            |    2 +-
 drivers/net/Kconfig                  |   17 +
 drivers/net/Makefile                 |    2 +
 drivers/net/am65-cpsw-nuss.c         |  785 +++++++++
 drivers/net/cpsw.c                   |  178 --
 drivers/net/davinci_mdio.c           |  188 +++
 drivers/soc/Makefile                 |    1 +
 drivers/soc/ti/Makefile              |    1 +
 drivers/soc/ti/k3-navss-ringacc.c    | 1163 +++++++++++++
 include/dma-devices.h                |  172 ++
 include/soc/ti/cppi5.h               |  996 ++++++++++++
 include/soc/ti/k3-navss-ringacc.h    |  252 +++
 include/soc/ti/ti-udma.h             |   45 +
 include/soc/ti/ti_sci_protocol.h     |   38 +-
 27 files changed, 7515 insertions(+), 230 deletions(-)
---
base-commit: 351a306c0d712a9f09032e26273f38ab9b38f35f
change-id: 20241108-network-k3-ea50583a0423

Best regards,
-- 
Sascha Hauer <s.hauer@pengutronix.de>