From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>,
Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH master v2 1/2] crc: crc-itu-t: generate lookup table on first use
Date: Mon, 2 Dec 2024 09:08:17 +0100 [thread overview]
Message-ID: <20241202080818.3471605-1-a.fatoum@pengutronix.de> (raw)
Unlike CRC32, CRC16 enjoys only limited use in barebox:
- RATP
- DDR SPD EEPROM
- TQ EEPROM
- SD over SPI
- XYMODEM
Nevertheless, once one of these is enabled, a lookup table of 512 bytes
is generated, which is, by definition, badly compressible.
Let's do what CRC32 is doing and generate the lookup table anew on first
access instead.
This saves us 404 bytes for a XZ-compressed THUMB2 barebox.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
crypto/crc-itu-t.c | 69 ++++++++++++++++++++++------------------------
include/crc.h | 23 ----------------
2 files changed, 33 insertions(+), 59 deletions(-)
diff --git a/crypto/crc-itu-t.c b/crypto/crc-itu-t.c
index 64bccfb7420d..837a6464b6aa 100644
--- a/crypto/crc-itu-t.c
+++ b/crypto/crc-itu-t.c
@@ -7,41 +7,36 @@
#include <crc.h>
-/** CRC table for the CRC ITU-T V.41 0x1021 (x^16 + x^12 + x^15 + 1) */
-const u16 crc_itu_t_table[256] = {
- 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
- 0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
- 0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6,
- 0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de,
- 0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485,
- 0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d,
- 0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4,
- 0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc,
- 0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823,
- 0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b,
- 0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12,
- 0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a,
- 0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41,
- 0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49,
- 0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70,
- 0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78,
- 0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f,
- 0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067,
- 0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e,
- 0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256,
- 0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d,
- 0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
- 0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c,
- 0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634,
- 0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab,
- 0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3,
- 0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a,
- 0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92,
- 0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9,
- 0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1,
- 0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8,
- 0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0
-};
+static u16 crc_itu_t_table[256];
+
+/*
+ * Implements the standard CRC ITU-T V.41:
+ * Width 16
+ * Poly 0x1021 (x^16 + x^12 + x^15 + 1)
+ * Init 0
+ */
+static u16 crc_itu_t_byte(u16 crc, const u8 data)
+{
+ int i;
+
+ crc = crc ^ data << 8;
+ for (i = 0; i < 8; ++i) {
+ if (crc & 0x8000)
+ crc = crc << 1 ^ 0x1021;
+ else
+ crc = crc << 1;
+ }
+ return crc;
+}
+
+static void make_crc_table(void)
+{
+ if (crc_itu_t_table[1])
+ return;
+
+ for (int n = 0; n < 256; n++)
+ crc_itu_t_table[n] = crc_itu_t_byte(0, n);
+}
/**
* crc_itu_t - Compute the CRC-ITU-T for the data buffer
@@ -54,7 +49,9 @@ const u16 crc_itu_t_table[256] = {
*/
u16 crc_itu_t(u16 crc, const u8 *buffer, size_t len)
{
+ make_crc_table();
+
while (len--)
- crc = crc_itu_t_byte(crc, *buffer++);
+ crc = (crc << 8) ^ crc_itu_t_table[((crc >> 8) ^ *buffer++) & 0xff];
return crc;
}
diff --git a/include/crc.h b/include/crc.h
index a5204aaabb9c..3eba635dbaa4 100644
--- a/include/crc.h
+++ b/include/crc.h
@@ -10,31 +10,8 @@
* Poly 0x1021 (x^16 + x^12 + x^15 + 1)
* Init 0
*/
-extern u16 const crc_itu_t_table[256];
-
extern u16 crc_itu_t(u16 crc, const u8 *buffer, size_t len);
-#ifdef __PBL__
-static inline u16 crc_itu_t_byte(u16 crc, const u8 data)
-{
- int i;
-
- crc = crc ^ data << 8;
- for (i = 0; i < 8; ++i) {
- if (crc & 0x8000)
- crc = crc << 1 ^ 0x1021;
- else
- crc = crc << 1;
- }
- return crc;
-}
-#else
-static inline u16 crc_itu_t_byte(u16 crc, const u8 data)
-{
- return (crc << 8) ^ crc_itu_t_table[((crc >> 8) ^ data) & 0xff];
-}
-#endif
-
uint32_t crc32(uint32_t, const void *, unsigned int);
uint32_t crc32_be(uint32_t, const void *, unsigned int);
uint32_t crc32_no_comp(uint32_t, const void *, unsigned int);
--
2.39.5
next reply other threads:[~2024-12-02 8:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-02 8:08 Ahmad Fatoum [this message]
2024-12-02 8:08 ` [PATCH master v2 2/2] ARM: omap: add two smaller MLO defconfigs for AM335x Ahmad Fatoum
2024-12-02 11:06 ` [PATCH master v2 1/2] crc: crc-itu-t: generate lookup table on first use Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241202080818.3471605-1-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=sohaib.amhmd@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox