mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH 0/3] add K3 I2C and tps65219 support
@ 2025-01-08 15:24 Sascha Hauer
  2025-01-08 15:24 ` [PATCH 1/3] i2c: omap: add ti,am64-i2c compatible Sascha Hauer
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Sascha Hauer @ 2025-01-08 15:24 UTC (permalink / raw)
  To: open list:BAREBOX

This series adds I2C support for TI K3 SoCs along with support for
the TI tps65219 PMIC chip which is often found on K3 boards.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
Sascha Hauer (3):
      i2c: omap: add ti,am64-i2c compatible
      mfd: add tps65219 support
      regulator: add tps65219 regulator support

 drivers/i2c/busses/Kconfig             |   2 +-
 drivers/i2c/busses/i2c-omap.c          |   3 +
 drivers/mfd/Kconfig                    |   5 +
 drivers/mfd/Makefile                   |   1 +
 drivers/mfd/tps65219.c                 |  82 ++++++++
 drivers/regulator/Kconfig              |   4 +
 drivers/regulator/Makefile             |   1 +
 drivers/regulator/tps65219-regulator.c | 187 ++++++++++++++++++
 include/linux/mfd/tps65219.h           | 339 +++++++++++++++++++++++++++++++++
 9 files changed, 623 insertions(+), 1 deletion(-)
---
base-commit: 06e9050f42fd00f99fa0e5385bce8c1c9d3adf0e
change-id: 20250108-k3-i2c-efc0a9c7c807

Best regards,
-- 
Sascha Hauer <s.hauer@pengutronix.de>




^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH 1/3] i2c: omap: add ti,am64-i2c compatible
  2025-01-08 15:24 [PATCH 0/3] add K3 I2C and tps65219 support Sascha Hauer
@ 2025-01-08 15:24 ` Sascha Hauer
  2025-01-08 15:24 ` [PATCH 2/3] mfd: add tps65219 support Sascha Hauer
  2025-01-08 15:24 ` [PATCH 3/3] regulator: add tps65219 regulator support Sascha Hauer
  2 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2025-01-08 15:24 UTC (permalink / raw)
  To: open list:BAREBOX

The driver can be used as-is on TI AM625 and similar SoCs. Add the
compatible entry for these SoCs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/i2c/busses/Kconfig    | 2 +-
 drivers/i2c/busses/i2c-omap.c | 3 +++
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 093b12b2ef..b7ad9e6ecf 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -53,7 +53,7 @@ config I2C_MV64XXX
 
 config I2C_OMAP
 	bool "OMAP I2C Master driver"
-	depends on ARCH_OMAP
+	depends on ARCH_OMAP || ARCH_K3
 
 config I2C_TEGRA
 	bool "Tegra I2C master driver"
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 023c9673ba..0ee4c70de5 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1215,6 +1215,9 @@ static __maybe_unused struct of_device_id omap_i2c_dt_ids[] = {
 		.data = &omap3_data,
 	}, {
 		.compatible = "ti,omap4-i2c",
+	},  {
+		.compatible = "ti,am64-i2c",
+		.data = &omap4_data,
 	}, {
 		/* sentinel */
 	}

-- 
2.39.5




^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH 2/3] mfd: add tps65219 support
  2025-01-08 15:24 [PATCH 0/3] add K3 I2C and tps65219 support Sascha Hauer
  2025-01-08 15:24 ` [PATCH 1/3] i2c: omap: add ti,am64-i2c compatible Sascha Hauer
@ 2025-01-08 15:24 ` Sascha Hauer
  2025-01-08 15:24 ` [PATCH 3/3] regulator: add tps65219 regulator support Sascha Hauer
  2 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2025-01-08 15:24 UTC (permalink / raw)
  To: open list:BAREBOX

The tps65219 is a PMIC IC from Texas instruments. This patch adds basic
mfd support for this chip based on the corresponding Linux driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mfd/Kconfig          |   5 +
 drivers/mfd/Makefile         |   1 +
 drivers/mfd/tps65219.c       |  82 +++++++++++
 include/linux/mfd/tps65219.h | 339 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 427 insertions(+)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index dabe71dbdc..471f85cd63 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -41,6 +41,11 @@ config MFD_SYSCON
 	help
 	  Select this option to enable accessing system control registers
 
+config MFD_TPS65219
+	bool "TPS65219 driver"
+	depends on I2C
+	select REGMAP_I2C
+
 config MFD_TWLCORE
 	bool
 
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 00f3eacf3c..88480f7064 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -26,3 +26,4 @@ obj-$(CONFIG_MFD_AXP20X_I2C)	+= axp20x-i2c.o axp20x.o
 obj-$(CONFIG_MFD_ATMEL_SMC)	+= atmel-smc.o
 obj-$(CONFIG_MFD_ROHM_BD718XX)	+= rohm-bd718x7.o
 obj-$(CONFIG_MFD_PCA9450)	+= pca9450.o
+obj-$(CONFIG_MFD_TPS65219)	+= tps65219.o
diff --git a/drivers/mfd/tps65219.c b/drivers/mfd/tps65219.c
new file mode 100644
index 0000000000..11f2e1798b
--- /dev/null
+++ b/drivers/mfd/tps65219.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MFD core driver for TI TPS65219
+ */
+
+#define pr_fmt(fmt) "tps65219: " fmt
+
+#include <i2c/i2c.h>
+#include <linux/mfd/core.h>
+#include <driver.h>
+#include <of.h>
+#include <linux/regmap.h>
+#include <linux/mfd/tps65219.h>
+#include <linux/device.h>
+
+static const struct mfd_cell tps65219_cells[] = {
+	{ .name = "tps65219-regulator", },
+	{ .name = "tps65219-gpio", },
+};
+
+static const struct mfd_cell tps65219_pwrbutton_cell = {
+	.name = "tps65219-pwrbutton",
+};
+
+static const struct regmap_config tps65219_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = TPS65219_REG_FACTORY_CONFIG_2,
+};
+
+static int tps65219_probe(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tps65219 *tps;
+	unsigned int chipid;
+	bool pwr_button;
+	int ret;
+
+	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+	if (!tps)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, tps);
+
+	tps->dev = &client->dev;
+
+	tps->regmap = regmap_init_i2c(client, &tps65219_regmap_config);
+	if (IS_ERR(tps->regmap))
+		return dev_err_probe(tps->dev, PTR_ERR(tps->regmap), "Failed to allocate register map\n");
+
+	ret = regmap_read(tps->regmap, TPS65219_REG_TI_DEV_ID, &chipid);
+	if (ret)
+		return dev_err_probe(tps->dev, ret, "Failed to read device ID\n");
+
+	dev->priv = tps;
+
+	ret = mfd_add_devices(tps->dev, tps65219_cells, ARRAY_SIZE(tps65219_cells));
+	if (ret)
+		return dev_err_probe(tps->dev, ret, "Failed to add child devices\n");
+
+	pwr_button = of_property_read_bool(tps->dev->of_node, "ti,power-button");
+	if (pwr_button) {
+		ret = mfd_add_devices(tps->dev, &tps65219_pwrbutton_cell, 1);
+		if (ret)
+			return dev_err_probe(tps->dev, ret, "Failed to add power-button\n");
+	}
+
+	return 0;
+}
+
+static const struct of_device_id tps65219_of_match[] = {
+	{ .compatible = "ti,tps65219" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tps65219_of_match);
+
+static __maybe_unused struct driver tps65219_i2c_driver = {
+	.name = "tps65219",
+	.of_compatible = tps65219_of_match,
+	.probe    = tps65219_probe,
+};
+coredevice_i2c_driver(tps65219_i2c_driver);
diff --git a/include/linux/mfd/tps65219.h b/include/linux/mfd/tps65219.h
new file mode 100644
index 0000000000..ab14eff54d
--- /dev/null
+++ b/include/linux/mfd/tps65219.h
@@ -0,0 +1,339 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Functions to access TPS65219 Power Management IC.
+ *
+ * Copyright (C) 2022 BayLibre Incorporated - https://www.baylibre.com/
+ */
+
+#ifndef MFD_TPS65219_H
+#define MFD_TPS65219_H
+
+#include <linux/bitops.h>
+
+struct regmap;
+
+#define TPS65219_1V35					1350000
+#define TPS65219_1V8					1800000
+
+/* TPS chip id list */
+#define TPS65219					0xF0
+
+/* I2C ID for TPS65219 part */
+#define TPS65219_I2C_ID					0x24
+
+/* All register addresses */
+#define TPS65219_REG_TI_DEV_ID				0x00
+#define TPS65219_REG_NVM_ID				0x01
+#define TPS65219_REG_ENABLE_CTRL			0x02
+#define TPS65219_REG_BUCKS_CONFIG			0x03
+#define TPS65219_REG_LDO4_VOUT				0x04
+#define TPS65219_REG_LDO3_VOUT				0x05
+#define TPS65219_REG_LDO2_VOUT				0x06
+#define TPS65219_REG_LDO1_VOUT				0x07
+#define TPS65219_REG_BUCK3_VOUT				0x8
+#define TPS65219_REG_BUCK2_VOUT				0x9
+#define TPS65219_REG_BUCK1_VOUT				0xA
+#define TPS65219_REG_LDO4_SEQUENCE_SLOT			0xB
+#define TPS65219_REG_LDO3_SEQUENCE_SLOT			0xC
+#define TPS65219_REG_LDO2_SEQUENCE_SLOT			0xD
+#define TPS65219_REG_LDO1_SEQUENCE_SLOT			0xE
+#define TPS65219_REG_BUCK3_SEQUENCE_SLOT		0xF
+#define TPS65219_REG_BUCK2_SEQUENCE_SLOT		0x10
+#define TPS65219_REG_BUCK1_SEQUENCE_SLOT		0x11
+#define TPS65219_REG_nRST_SEQUENCE_SLOT			0x12
+#define TPS65219_REG_GPIO_SEQUENCE_SLOT			0x13
+#define TPS65219_REG_GPO2_SEQUENCE_SLOT			0x14
+#define TPS65219_REG_GPO1_SEQUENCE_SLOT			0x15
+#define TPS65219_REG_POWER_UP_SLOT_DURATION_1		0x16
+#define TPS65219_REG_POWER_UP_SLOT_DURATION_2		0x17
+#define TPS65219_REG_POWER_UP_SLOT_DURATION_3		0x18
+#define TPS65219_REG_POWER_UP_SLOT_DURATION_4		0x19
+#define TPS65219_REG_POWER_DOWN_SLOT_DURATION_1		0x1A
+#define TPS65219_REG_POWER_DOWN_SLOT_DURATION_2		0x1B
+#define TPS65219_REG_POWER_DOWN_SLOT_DURATION_3		0x1C
+#define TPS65219_REG_POWER_DOWN_SLOT_DURATION_4		0x1D
+#define TPS65219_REG_GENERAL_CONFIG			0x1E
+#define TPS65219_REG_MFP_1_CONFIG			0x1F
+#define TPS65219_REG_MFP_2_CONFIG			0x20
+#define TPS65219_REG_STBY_1_CONFIG			0x21
+#define TPS65219_REG_STBY_2_CONFIG			0x22
+#define TPS65219_REG_OC_DEGL_CONFIG			0x23
+/* 'sub irq' MASK registers */
+#define TPS65219_REG_INT_MASK_UV			0x24
+#define TPS65219_REG_MASK_CONFIG			0x25
+
+#define TPS65219_REG_I2C_ADDRESS_REG			0x26
+#define TPS65219_REG_USER_GENERAL_NVM_STORAGE		0x27
+#define TPS65219_REG_MANUFACTURING_VER			0x28
+#define TPS65219_REG_MFP_CTRL				0x29
+#define TPS65219_REG_DISCHARGE_CONFIG			0x2A
+/* main irq registers */
+#define TPS65219_REG_INT_SOURCE				0x2B
+/* 'sub irq' registers */
+#define TPS65219_REG_INT_LDO_3_4			0x2C
+#define TPS65219_REG_INT_LDO_1_2			0x2D
+#define TPS65219_REG_INT_BUCK_3				0x2E
+#define TPS65219_REG_INT_BUCK_1_2			0x2F
+#define TPS65219_REG_INT_SYSTEM				0x30
+#define TPS65219_REG_INT_RV				0x31
+#define TPS65219_REG_INT_TIMEOUT_RV_SD			0x32
+#define TPS65219_REG_INT_PB				0x33
+
+#define TPS65219_REG_INT_LDO_3_4_POS			0
+#define TPS65219_REG_INT_LDO_1_2_POS			1
+#define TPS65219_REG_INT_BUCK_3_POS			2
+#define TPS65219_REG_INT_BUCK_1_2_POS			3
+#define TPS65219_REG_INT_SYS_POS			4
+#define TPS65219_REG_INT_RV_POS				5
+#define TPS65219_REG_INT_TO_RV_POS			6
+#define TPS65219_REG_INT_PB_POS				7
+
+#define TPS65219_REG_USER_NVM_CMD			0x34
+#define TPS65219_REG_POWER_UP_STATUS			0x35
+#define TPS65219_REG_SPARE_2				0x36
+#define TPS65219_REG_SPARE_3				0x37
+#define TPS65219_REG_FACTORY_CONFIG_2			0x41
+
+/* Register field definitions */
+#define TPS65219_DEVID_REV_MASK				GENMASK(7, 0)
+#define TPS65219_BUCKS_LDOS_VOUT_VSET_MASK		GENMASK(5, 0)
+#define TPS65219_BUCKS_UV_THR_SEL_MASK			BIT(6)
+#define TPS65219_BUCKS_BW_SEL_MASK			BIT(7)
+#define LDO_BYP_SHIFT					6
+#define TPS65219_LDOS_BYP_CONFIG_MASK			BIT(LDO_BYP_SHIFT)
+#define TPS65219_LDOS_LSW_CONFIG_MASK			BIT(7)
+/* Regulators enable control */
+#define TPS65219_ENABLE_BUCK1_EN_MASK			BIT(0)
+#define TPS65219_ENABLE_BUCK2_EN_MASK			BIT(1)
+#define TPS65219_ENABLE_BUCK3_EN_MASK			BIT(2)
+#define TPS65219_ENABLE_LDO1_EN_MASK			BIT(3)
+#define TPS65219_ENABLE_LDO2_EN_MASK			BIT(4)
+#define TPS65219_ENABLE_LDO3_EN_MASK			BIT(5)
+#define TPS65219_ENABLE_LDO4_EN_MASK			BIT(6)
+/* power ON-OFF sequence slot */
+#define TPS65219_BUCKS_LDOS_SEQUENCE_OFF_SLOT_MASK	GENMASK(3, 0)
+#define TPS65219_BUCKS_LDOS_SEQUENCE_ON_SLOT_MASK	GENMASK(7, 4)
+/* TODO: Not needed, same mapping as TPS65219_ENABLE_REGNAME_EN, factorize */
+#define TPS65219_STBY1_BUCK1_STBY_EN_MASK		BIT(0)
+#define TPS65219_STBY1_BUCK2_STBY_EN_MASK		BIT(1)
+#define TPS65219_STBY1_BUCK3_STBY_EN_MASK		BIT(2)
+#define TPS65219_STBY1_LDO1_STBY_EN_MASK		BIT(3)
+#define TPS65219_STBY1_LDO2_STBY_EN_MASK		BIT(4)
+#define TPS65219_STBY1_LDO3_STBY_EN_MASK		BIT(5)
+#define TPS65219_STBY1_LDO4_STBY_EN_MASK		BIT(6)
+/* STBY_2 config */
+#define TPS65219_STBY2_GPO1_STBY_EN_MASK		BIT(0)
+#define TPS65219_STBY2_GPO2_STBY_EN_MASK		BIT(1)
+#define TPS65219_STBY2_GPIO_STBY_EN_MASK		BIT(2)
+/* MFP Control */
+#define TPS65219_MFP_I2C_OFF_REQ_MASK			BIT(0)
+#define TPS65219_MFP_STBY_I2C_CTRL_MASK			BIT(1)
+#define TPS65219_MFP_COLD_RESET_I2C_CTRL_MASK		BIT(2)
+#define TPS65219_MFP_WARM_RESET_I2C_CTRL_MASK		BIT(3)
+#define TPS65219_MFP_GPIO_STATUS_MASK			BIT(4)
+/* MFP_1 Config */
+#define TPS65219_MFP_1_VSEL_DDR_SEL_MASK		BIT(0)
+#define TPS65219_MFP_1_VSEL_SD_POL_MASK			BIT(1)
+#define TPS65219_MFP_1_VSEL_RAIL_MASK			BIT(2)
+/* MFP_2 Config */
+#define TPS65219_MFP_2_MODE_STBY_MASK			GENMASK(1, 0)
+#define TPS65219_MFP_2_MODE_RESET_MASK			BIT(2)
+#define TPS65219_MFP_2_EN_PB_VSENSE_DEGL_MASK		BIT(3)
+#define TPS65219_MFP_2_EN_PB_VSENSE_MASK		GENMASK(5, 4)
+#define TPS65219_MFP_2_WARM_COLD_RESET_MASK		BIT(6)
+#define TPS65219_MFP_2_PU_ON_FSD_MASK			BIT(7)
+#define TPS65219_MFP_2_EN				0
+#define TPS65219_MFP_2_PB				BIT(4)
+#define TPS65219_MFP_2_VSENSE				BIT(5)
+/* MASK_UV Config */
+#define TPS65219_REG_MASK_UV_LDO1_UV_MASK		BIT(0)
+#define TPS65219_REG_MASK_UV_LDO2_UV_MASK		BIT(1)
+#define TPS65219_REG_MASK_UV_LDO3_UV_MASK		BIT(2)
+#define TPS65219_REG_MASK_UV_LDO4_UV_MASK		BIT(3)
+#define TPS65219_REG_MASK_UV_BUCK1_UV_MASK		BIT(4)
+#define TPS65219_REG_MASK_UV_BUCK2_UV_MASK		BIT(5)
+#define TPS65219_REG_MASK_UV_BUCK3_UV_MASK		BIT(6)
+#define TPS65219_REG_MASK_UV_RETRY_MASK			BIT(7)
+/* MASK Config */
+// SENSOR_N_WARM_MASK already defined in Thermal
+#define TPS65219_REG_MASK_INT_FOR_RV_MASK		BIT(4)
+#define TPS65219_REG_MASK_EFFECT_MASK			GENMASK(2, 1)
+#define TPS65219_REG_MASK_INT_FOR_PB_MASK		BIT(7)
+/* UnderVoltage - Short to GND - OverCurrent*/
+/* LDO3-4 */
+#define TPS65219_INT_LDO3_SCG_MASK			BIT(0)
+#define TPS65219_INT_LDO3_OC_MASK			BIT(1)
+#define TPS65219_INT_LDO3_UV_MASK			BIT(2)
+#define TPS65219_INT_LDO4_SCG_MASK			BIT(3)
+#define TPS65219_INT_LDO4_OC_MASK			BIT(4)
+#define TPS65219_INT_LDO4_UV_MASK			BIT(5)
+/* LDO1-2 */
+#define TPS65219_INT_LDO1_SCG_MASK			BIT(0)
+#define TPS65219_INT_LDO1_OC_MASK			BIT(1)
+#define TPS65219_INT_LDO1_UV_MASK			BIT(2)
+#define TPS65219_INT_LDO2_SCG_MASK			BIT(3)
+#define TPS65219_INT_LDO2_OC_MASK			BIT(4)
+#define TPS65219_INT_LDO2_UV_MASK			BIT(5)
+/* BUCK3 */
+#define TPS65219_INT_BUCK3_SCG_MASK			BIT(0)
+#define TPS65219_INT_BUCK3_OC_MASK			BIT(1)
+#define TPS65219_INT_BUCK3_NEG_OC_MASK			BIT(2)
+#define TPS65219_INT_BUCK3_UV_MASK			BIT(3)
+/* BUCK1-2 */
+#define TPS65219_INT_BUCK1_SCG_MASK			BIT(0)
+#define TPS65219_INT_BUCK1_OC_MASK			BIT(1)
+#define TPS65219_INT_BUCK1_NEG_OC_MASK			BIT(2)
+#define TPS65219_INT_BUCK1_UV_MASK			BIT(3)
+#define TPS65219_INT_BUCK2_SCG_MASK			BIT(4)
+#define TPS65219_INT_BUCK2_OC_MASK			BIT(5)
+#define TPS65219_INT_BUCK2_NEG_OC_MASK			BIT(6)
+#define TPS65219_INT_BUCK2_UV_MASK			BIT(7)
+/* Thermal Sensor  */
+#define TPS65219_INT_SENSOR_3_WARM_MASK			BIT(0)
+#define TPS65219_INT_SENSOR_2_WARM_MASK			BIT(1)
+#define TPS65219_INT_SENSOR_1_WARM_MASK			BIT(2)
+#define TPS65219_INT_SENSOR_0_WARM_MASK			BIT(3)
+#define TPS65219_INT_SENSOR_3_HOT_MASK			BIT(4)
+#define TPS65219_INT_SENSOR_2_HOT_MASK			BIT(5)
+#define TPS65219_INT_SENSOR_1_HOT_MASK			BIT(6)
+#define TPS65219_INT_SENSOR_0_HOT_MASK			BIT(7)
+/* Residual Voltage */
+#define TPS65219_INT_BUCK1_RV_MASK			BIT(0)
+#define TPS65219_INT_BUCK2_RV_MASK			BIT(1)
+#define TPS65219_INT_BUCK3_RV_MASK			BIT(2)
+#define TPS65219_INT_LDO1_RV_MASK			BIT(3)
+#define TPS65219_INT_LDO2_RV_MASK			BIT(4)
+#define TPS65219_INT_LDO3_RV_MASK			BIT(5)
+#define TPS65219_INT_LDO4_RV_MASK			BIT(6)
+/* Residual Voltage ShutDown */
+#define TPS65219_INT_BUCK1_RV_SD_MASK			BIT(0)
+#define TPS65219_INT_BUCK2_RV_SD_MASK			BIT(1)
+#define TPS65219_INT_BUCK3_RV_SD_MASK			BIT(2)
+#define TPS65219_INT_LDO1_RV_SD_MASK			BIT(3)
+#define TPS65219_INT_LDO2_RV_SD_MASK			BIT(4)
+#define TPS65219_INT_LDO3_RV_SD_MASK			BIT(5)
+#define TPS65219_INT_LDO4_RV_SD_MASK			BIT(6)
+#define TPS65219_INT_TIMEOUT_MASK			BIT(7)
+/* Power Button */
+#define TPS65219_INT_PB_FALLING_EDGE_DETECT_MASK	BIT(0)
+#define TPS65219_INT_PB_RISING_EDGE_DETECT_MASK		BIT(1)
+#define TPS65219_INT_PB_REAL_TIME_STATUS_MASK		BIT(2)
+
+#define TPS65219_PB_POS					7
+#define TPS65219_TO_RV_POS				6
+#define TPS65219_RV_POS					5
+#define TPS65219_SYS_POS				4
+#define TPS65219_BUCK_1_2_POS				3
+#define TPS65219_BUCK_3_POS				2
+#define TPS65219_LDO_1_2_POS				1
+#define TPS65219_LDO_3_4_POS				0
+
+/* IRQs */
+enum {
+	/* LDO3-4 register IRQs */
+	TPS65219_INT_LDO3_SCG,
+	TPS65219_INT_LDO3_OC,
+	TPS65219_INT_LDO3_UV,
+	TPS65219_INT_LDO4_SCG,
+	TPS65219_INT_LDO4_OC,
+	TPS65219_INT_LDO4_UV,
+	/* LDO1-2 */
+	TPS65219_INT_LDO1_SCG,
+	TPS65219_INT_LDO1_OC,
+	TPS65219_INT_LDO1_UV,
+	TPS65219_INT_LDO2_SCG,
+	TPS65219_INT_LDO2_OC,
+	TPS65219_INT_LDO2_UV,
+	/* BUCK3 */
+	TPS65219_INT_BUCK3_SCG,
+	TPS65219_INT_BUCK3_OC,
+	TPS65219_INT_BUCK3_NEG_OC,
+	TPS65219_INT_BUCK3_UV,
+	/* BUCK1-2 */
+	TPS65219_INT_BUCK1_SCG,
+	TPS65219_INT_BUCK1_OC,
+	TPS65219_INT_BUCK1_NEG_OC,
+	TPS65219_INT_BUCK1_UV,
+	TPS65219_INT_BUCK2_SCG,
+	TPS65219_INT_BUCK2_OC,
+	TPS65219_INT_BUCK2_NEG_OC,
+	TPS65219_INT_BUCK2_UV,
+	/* Thermal Sensor  */
+	TPS65219_INT_SENSOR_3_WARM,
+	TPS65219_INT_SENSOR_2_WARM,
+	TPS65219_INT_SENSOR_1_WARM,
+	TPS65219_INT_SENSOR_0_WARM,
+	TPS65219_INT_SENSOR_3_HOT,
+	TPS65219_INT_SENSOR_2_HOT,
+	TPS65219_INT_SENSOR_1_HOT,
+	TPS65219_INT_SENSOR_0_HOT,
+	/* Residual Voltage */
+	TPS65219_INT_BUCK1_RV,
+	TPS65219_INT_BUCK2_RV,
+	TPS65219_INT_BUCK3_RV,
+	TPS65219_INT_LDO1_RV,
+	TPS65219_INT_LDO2_RV,
+	TPS65219_INT_LDO3_RV,
+	TPS65219_INT_LDO4_RV,
+	/* Residual Voltage ShutDown */
+	TPS65219_INT_BUCK1_RV_SD,
+	TPS65219_INT_BUCK2_RV_SD,
+	TPS65219_INT_BUCK3_RV_SD,
+	TPS65219_INT_LDO1_RV_SD,
+	TPS65219_INT_LDO2_RV_SD,
+	TPS65219_INT_LDO3_RV_SD,
+	TPS65219_INT_LDO4_RV_SD,
+	TPS65219_INT_TIMEOUT,
+	/* Power Button */
+	TPS65219_INT_PB_FALLING_EDGE_DETECT,
+	TPS65219_INT_PB_RISING_EDGE_DETECT,
+};
+
+enum tps65219_regulator_id {
+	/* DCDC's */
+	TPS65219_BUCK_1,
+	TPS65219_BUCK_2,
+	TPS65219_BUCK_3,
+	/* LDOs */
+	TPS65219_LDO_1,
+	TPS65219_LDO_2,
+	TPS65219_LDO_3,
+	TPS65219_LDO_4,
+};
+
+/* Number of step-down converters available */
+#define TPS65219_NUM_DCDC		3
+/* Number of LDO voltage regulators available */
+#define TPS65219_NUM_LDO		4
+/* Number of total regulators available */
+#define TPS65219_NUM_REGULATOR		(TPS65219_NUM_DCDC + TPS65219_NUM_LDO)
+
+/* Define the TPS65219 IRQ numbers */
+enum tps65219_irqs {
+	/* INT source registers */
+	TPS65219_TO_RV_SD_SET_IRQ,
+	TPS65219_RV_SET_IRQ,
+	TPS65219_SYS_SET_IRQ,
+	TPS65219_BUCK_1_2_SET_IRQ,
+	TPS65219_BUCK_3_SET_IRQ,
+	TPS65219_LDO_1_2_SET_IRQ,
+	TPS65219_LDO_3_4_SET_IRQ,
+	TPS65219_PB_SET_IRQ,
+};
+
+/**
+ * struct tps65219 - tps65219 sub-driver chip access routines
+ *
+ * Device data may be used to access the TPS65219 chip
+ *
+ * @dev: MFD device
+ * @regmap: Regmap for accessing the device registers
+ * @irq_data: Regmap irq data used for the irq chip
+ * @nb: notifier block for the restart handler
+ */
+struct tps65219 {
+	struct device *dev;
+	struct regmap *regmap;
+};
+
+#endif /* MFD_TPS65219_H */

-- 
2.39.5




^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH 3/3] regulator: add tps65219 regulator support
  2025-01-08 15:24 [PATCH 0/3] add K3 I2C and tps65219 support Sascha Hauer
  2025-01-08 15:24 ` [PATCH 1/3] i2c: omap: add ti,am64-i2c compatible Sascha Hauer
  2025-01-08 15:24 ` [PATCH 2/3] mfd: add tps65219 support Sascha Hauer
@ 2025-01-08 15:24 ` Sascha Hauer
  2 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2025-01-08 15:24 UTC (permalink / raw)
  To: open list:BAREBOX

Add support for the regulators on the tps65219 PMIC. This driver
is based on the corresponding Linux driver, but limited to the barebox
regulator capabilities.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/regulator/Kconfig              |   4 +
 drivers/regulator/Makefile             |   1 +
 drivers/regulator/tps65219-regulator.c | 187 +++++++++++++++++++++++++++++++++
 3 files changed, 192 insertions(+)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 54f27e1824..3374a511f8 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -58,6 +58,10 @@ config REGULATOR_STPMIC1
 	  an application processor as well as to external system
 	  peripherals such as DDR, Flash memories and system devices.
 
+config REGULATOR_TPS65219
+	tristate "TI TPS65219 Regulators"
+	depends on MFD_TPS65219
+
 config REGULATOR_ANATOP
 	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
 	depends on MFD_SYSCON
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 54ab6ef650..a6f5b5b734 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o
 obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
 obj-$(CONFIG_REGULATOR_ARM_SCMI) += scmi-regulator.o
 obj-$(CONFIG_REGULATOR_RK808)   += rk808-regulator.o
+obj-$(CONFIG_REGULATOR_TPS65219) += tps65219-regulator.o
diff --git a/drivers/regulator/tps65219-regulator.c b/drivers/regulator/tps65219-regulator.c
new file mode 100644
index 0000000000..f70fd64c67
--- /dev/null
+++ b/drivers/regulator/tps65219-regulator.c
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// tps65219-regulator.c
+//
+// Regulator driver for TPS65219 PMIC
+//
+// Copyright (C) 2022 BayLibre Incorporated - https://www.baylibre.com/
+//
+// This implementation derived from tps65218 authored by
+// "J Keerthy <j-keerthy@ti.com>"
+//
+#define DEBUG
+#include <linux/mfd/tps65219.h>
+#include <of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/of_regulator.h>
+#include <regulator.h>
+#include <linux/device.h>
+
+struct tps65219_regulator_irq_type {
+	const char *irq_name;
+	const char *regulator_name;
+	const char *event_name;
+	unsigned long event;
+};
+
+#define TPS65219_REGULATOR(_name, _of, _id, _type, _ops, _n, _vr, _vm, _er, \
+			   _em, _cr, _cm, _lr, _nlr, _delay, _fuv, \
+			   _ct, _ncl, _bpm) \
+	{								\
+		.name			= _name,			\
+		.of_match		= _of,				\
+		.regulators_node	= of_match_ptr("regulators"),	\
+		.supply_name		= _of,				\
+		.id			= _id,				\
+		.ops			= &(_ops),			\
+		.n_voltages		= _n,				\
+		.vsel_reg		= _vr,				\
+		.vsel_mask		= _vm,				\
+		.enable_reg		= _er,				\
+		.enable_mask		= _em,				\
+		.volt_table		= NULL,				\
+		.linear_ranges		= _lr,				\
+		.n_linear_ranges	= _nlr,				\
+		.fixed_uV		= _fuv,				\
+	}								\
+
+static const struct regulator_linear_range bucks_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0x0, 0x1f, 25000),
+	REGULATOR_LINEAR_RANGE(1400000, 0x20, 0x33, 100000),
+	REGULATOR_LINEAR_RANGE(3400000, 0x34, 0x3f, 0),
+};
+
+static const struct regulator_linear_range ldos_1_2_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0x0, 0x37, 50000),
+	REGULATOR_LINEAR_RANGE(3400000, 0x38, 0x3f, 0),
+};
+
+static const struct regulator_linear_range ldos_3_4_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1200000, 0x0, 0xC, 0),
+	REGULATOR_LINEAR_RANGE(1250000, 0xD, 0x35, 50000),
+	REGULATOR_LINEAR_RANGE(3300000, 0x36, 0x3F, 0),
+};
+
+/* Operations permitted on BUCK1/2/3 */
+static const struct regulator_ops tps65219_bucks_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+};
+
+/* Operations permitted on LDO1/2 */
+static const struct regulator_ops tps65219_ldos_1_2_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+};
+
+/* Operations permitted on LDO3/4 */
+static const struct regulator_ops tps65219_ldos_3_4_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+};
+
+static const struct regulator_desc regulators[] = {
+	TPS65219_REGULATOR("BUCK1", "buck1", TPS65219_BUCK_1,
+			   REGULATOR_VOLTAGE, tps65219_bucks_ops, 64,
+			   TPS65219_REG_BUCK1_VOUT,
+			   TPS65219_BUCKS_LDOS_VOUT_VSET_MASK,
+			   TPS65219_REG_ENABLE_CTRL,
+			   TPS65219_ENABLE_BUCK1_EN_MASK, 0, 0, bucks_ranges,
+			   3, 4000, 0, NULL, 0, 0),
+	TPS65219_REGULATOR("BUCK2", "buck2", TPS65219_BUCK_2,
+			   REGULATOR_VOLTAGE, tps65219_bucks_ops, 64,
+			   TPS65219_REG_BUCK2_VOUT,
+			   TPS65219_BUCKS_LDOS_VOUT_VSET_MASK,
+			   TPS65219_REG_ENABLE_CTRL,
+			   TPS65219_ENABLE_BUCK2_EN_MASK, 0, 0, bucks_ranges,
+			   3, 4000, 0, NULL, 0, 0),
+	TPS65219_REGULATOR("BUCK3", "buck3", TPS65219_BUCK_3,
+			   REGULATOR_VOLTAGE, tps65219_bucks_ops, 64,
+			   TPS65219_REG_BUCK3_VOUT,
+			   TPS65219_BUCKS_LDOS_VOUT_VSET_MASK,
+			   TPS65219_REG_ENABLE_CTRL,
+			   TPS65219_ENABLE_BUCK3_EN_MASK, 0, 0, bucks_ranges,
+			   3, 0, 0, NULL, 0, 0),
+	TPS65219_REGULATOR("LDO1", "ldo1", TPS65219_LDO_1,
+			   REGULATOR_VOLTAGE, tps65219_ldos_1_2_ops, 64,
+			   TPS65219_REG_LDO1_VOUT,
+			   TPS65219_BUCKS_LDOS_VOUT_VSET_MASK,
+			   TPS65219_REG_ENABLE_CTRL,
+			   TPS65219_ENABLE_LDO1_EN_MASK, 0, 0, ldos_1_2_ranges,
+			   2, 0, 0, NULL, 0, TPS65219_LDOS_BYP_CONFIG_MASK),
+	TPS65219_REGULATOR("LDO2", "ldo2", TPS65219_LDO_2,
+			   REGULATOR_VOLTAGE, tps65219_ldos_1_2_ops, 64,
+			   TPS65219_REG_LDO2_VOUT,
+			   TPS65219_BUCKS_LDOS_VOUT_VSET_MASK,
+			   TPS65219_REG_ENABLE_CTRL,
+			   TPS65219_ENABLE_LDO2_EN_MASK, 0, 0, ldos_1_2_ranges,
+			   2, 0, 0, NULL, 0, TPS65219_LDOS_BYP_CONFIG_MASK),
+	TPS65219_REGULATOR("LDO3", "ldo3", TPS65219_LDO_3,
+			   REGULATOR_VOLTAGE, tps65219_ldos_3_4_ops, 64,
+			   TPS65219_REG_LDO3_VOUT,
+			   TPS65219_BUCKS_LDOS_VOUT_VSET_MASK,
+			   TPS65219_REG_ENABLE_CTRL,
+			   TPS65219_ENABLE_LDO3_EN_MASK, 0, 0, ldos_3_4_ranges,
+			   3, 0, 0, NULL, 0, 0),
+	TPS65219_REGULATOR("LDO4", "ldo4", TPS65219_LDO_4,
+			   REGULATOR_VOLTAGE, tps65219_ldos_3_4_ops, 64,
+			   TPS65219_REG_LDO4_VOUT,
+			   TPS65219_BUCKS_LDOS_VOUT_VSET_MASK,
+			   TPS65219_REG_ENABLE_CTRL,
+			   TPS65219_ENABLE_LDO4_EN_MASK, 0, 0, ldos_3_4_ranges,
+			   3, 0, 0, NULL, 0, 0),
+};
+
+static int tps65219_regulator_probe(struct device *dev)
+{
+	struct tps65219 *tps = dev->parent->priv;
+	struct regulator_dev *rdev;
+	struct regulator_config config = { };
+	int i;
+	struct regulator_dev *rdevtbl[7];
+
+	config.dev = tps->dev;
+	config.driver_data = tps;
+	config.regmap = tps->regmap;
+
+	for (i = 0; i < ARRAY_SIZE(regulators); i++) {
+		dev_dbg(tps->dev, "%s regul i= %d START\n", __func__, i);
+		rdev = regulator_register(tps->dev, &regulators[i],
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(tps->dev, "failed to register %s regulator\n",
+				regulators[i].name);
+			return PTR_ERR(rdev);
+		}
+		rdevtbl[i] = rdev;
+		dev_dbg(tps->dev, "%s regul i= %d COMPLETED\n", __func__, i);
+	}
+
+	return 0;
+}
+
+static struct driver tps65219_regulator_driver = {
+	.name = "tps65219-regulator",
+	.probe = tps65219_regulator_probe,
+};
+coredevice_platform_driver(tps65219_regulator_driver);
+
+MODULE_AUTHOR("Jerome Neanne <j-neanne@baylibre.com>");
+MODULE_DESCRIPTION("TPS65219 voltage regulator driver");
+MODULE_ALIAS("platform:tps65219-pmic");
+MODULE_LICENSE("GPL");

-- 
2.39.5




^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2025-01-08 15:25 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-01-08 15:24 [PATCH 0/3] add K3 I2C and tps65219 support Sascha Hauer
2025-01-08 15:24 ` [PATCH 1/3] i2c: omap: add ti,am64-i2c compatible Sascha Hauer
2025-01-08 15:24 ` [PATCH 2/3] mfd: add tps65219 support Sascha Hauer
2025-01-08 15:24 ` [PATCH 3/3] regulator: add tps65219 regulator support Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox