From: Jules Maselbas <jmaselbas@zdiv.net>
To: barebox@lists.infradead.org
Cc: Jules Maselbas <jmaselbas@zdiv.net>
Subject: [PATCH v3 0/6] Initial support for Allwinner A64 SoC
Date: Wed, 12 Feb 2025 11:48:36 +0100 [thread overview]
Message-ID: <20250212104842.504-1-jmaselbas@zdiv.net> (raw)
This series adds an initial support for Allwinner, currently only
targetting the Pine64+ board, based on the A64 SoC.
This first series is intented as a second boot image only, that can
be started from u-boot. This series provides the bare minimal for
barebox to load the next OS from sd/mmc.
v2 highlights:
The main change in the V2 series is the new "one-size fit all"
clk driver only used right for the mmc0/mmc1/mmc2 clock source
(composite with a gate, a mux, two divs plus a fixed post-div).
v3 highlights:
Rework of the timeouts in the mci driver.
Split the lowlevel documentation out of this serie and added a
user documentation instead.
Replaced the sunxi_v8_defconfig with the multi_v8_defconfig
Jules Maselbas (6):
clk: divider: add error code propagation
clk: Add clock driver for sun50i-a64
pinctrl: Add sun50i-a64 pinctrl driver
mci: Add sunxi-mmc driver
ARM: sunxi: Introduce mach-sunxi
Documentation: sunxi: Add some documentation
Documentation/boards/sunxi.rst | 116 ++++
arch/arm/Kconfig | 12 +
arch/arm/Makefile | 1 +
arch/arm/configs/multi_v8_defconfig | 2 +
arch/arm/mach-sunxi/Kconfig | 13 +
arch/arm/mach-sunxi/Makefile | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-divider.c | 4 +-
drivers/clk/sunxi/Makefile | 3 +
drivers/clk/sunxi/clk-sun50i-a64.c | 294 ++++++++++
drivers/clk/sunxi/clk-sun50i-a64.h | 62 +++
drivers/clk/sunxi/clk-sunxi.c | 348 ++++++++++++
drivers/clk/sunxi/clk-sunxi.h | 79 +++
drivers/mci/Kconfig | 6 +
drivers/mci/Makefile | 2 +
drivers/mci/sunxi-mmc-common.c | 238 +++++++++
drivers/mci/sunxi-mmc-pbl.c | 81 +++
drivers/mci/sunxi-mmc.c | 176 ++++++
drivers/mci/sunxi-mmc.h | 222 ++++++++
drivers/pinctrl/Kconfig | 2 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/sunxi/Kconfig | 13 +
drivers/pinctrl/sunxi/Makefile | 3 +
drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c | 594 +++++++++++++++++++++
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 369 +++++++++++++
drivers/pinctrl/sunxi/pinctrl-sunxi.h | 224 ++++++++
include/mach/sunxi/xload.h | 12 +
27 files changed, 2878 insertions(+), 1 deletion(-)
create mode 100644 Documentation/boards/sunxi.rst
create mode 100644 arch/arm/mach-sunxi/Kconfig
create mode 100644 arch/arm/mach-sunxi/Makefile
create mode 100644 drivers/clk/sunxi/Makefile
create mode 100644 drivers/clk/sunxi/clk-sun50i-a64.c
create mode 100644 drivers/clk/sunxi/clk-sun50i-a64.h
create mode 100644 drivers/clk/sunxi/clk-sunxi.c
create mode 100644 drivers/clk/sunxi/clk-sunxi.h
create mode 100644 drivers/mci/sunxi-mmc-common.c
create mode 100644 drivers/mci/sunxi-mmc-pbl.c
create mode 100644 drivers/mci/sunxi-mmc.c
create mode 100644 drivers/mci/sunxi-mmc.h
create mode 100644 drivers/pinctrl/sunxi/Kconfig
create mode 100644 drivers/pinctrl/sunxi/Makefile
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sunxi.c
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sunxi.h
create mode 100644 include/mach/sunxi/xload.h
--
2.48.1
next reply other threads:[~2025-02-12 10:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-12 10:48 Jules Maselbas [this message]
2025-02-12 10:48 ` [PATCH v3 1/6] clk: divider: add error code propagation Jules Maselbas
2025-02-12 10:48 ` [PATCH v3 2/6] clk: Add clock driver for sun50i-a64 Jules Maselbas
2025-02-12 10:48 ` [PATCH v3 3/6] pinctrl: Add sun50i-a64 pinctrl driver Jules Maselbas
2025-02-12 10:48 ` [PATCH v3 4/6] mci: Add sunxi-mmc driver Jules Maselbas
2025-02-12 10:48 ` [PATCH v3 5/6] ARM: sunxi: Introduce mach-sunxi Jules Maselbas
2025-02-12 10:48 ` [PATCH v3 6/6] Documentation: sunxi: Add some documentation Jules Maselbas
2025-02-14 10:31 ` [PATCH v3 0/6] Initial support for Allwinner A64 SoC Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250212104842.504-1-jmaselbas@zdiv.net \
--to=jmaselbas@zdiv.net \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox