mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Marco Felsch <m.felsch@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 0/6] of: partition: add Linux CONFIG_OF_PARTITION-compatible adaptive fixup mode
Date: Mon, 17 Feb 2025 20:25:23 +0100	[thread overview]
Message-ID: <20250217192523.crgvcg2phxhce46d@pengutronix.de> (raw)
In-Reply-To: <20250217180833.3955657-1-a.fatoum@pengutronix.de>

Hi Ahmad,

thanks for working on this!

On 25-02-17, Ahmad Fatoum wrote:
> barebox has for many years supported a superset of the upstream OF
> partitions binding by parsing partitions out of SD/eMMC and EEPROM
> in addition to MTD.
> 
> Unfortunately, we didn't upstream our binding and a different binding
> went upstream into Linux v6.13-rc1 along with Linux commit
> 2e3a191e89f9 ("block: add support for partition table defined in OF").
> 
> Since then, if CONFIG_OF_PARTITION, which is disabled by default, is
> enabled, Linux will ignore any GPT/MBR if an SD/eMMC node has a
> fixed-partitions compatible subnode.
> 
> This is different from the barebox behavior, which allows both OF
> partitions and GPT/MBR to co-exist as long as they don't conflict.
> 
> As many barebox boards:
> 
>   - Place the environment in non-partitioned space prior to the first
>     partition
> 
>   - Fixup all fixed-partitions into the kernel device tree by default

Could we add a warning/notice that the board should be converted to make
use of the barebox GPT parttype-uuid? It's 2025 and IMHO there is no
reason for not using the GPT with the barebox state part-type UUID in
place. This is of course not related to this patchset.

Regards,
  Marco

> this can result in breakage if a newer kernel is booted with
> CONFIG_OF_PARTITION enabled.
> 
> To resolve this, this series introduces the barebox,fixed-partitions
> compatible and uses that in Linux device tree fixups for SD/eMMC
> by default.
> 
> Ahmad Fatoum (6):
>   of: factor out of_node_is_fixed_partitions check
>   of: of_path: support barebox,fixed-partitions
>   ARM: IMX8MP: var-dart-dt8mcustomboard.dts: use new-style partition
>     binding
>   ARM: dts: prefix all non-MTD fixed-partitions with barebox,
>   of: partition: refactor of_partition_binding checks into switch
>   of: partition: add Linux CONFIG_OF_PARTITION-compatible adaptive fixup
>     mode
> 
>  .../devicetree/bindings/mtd/partition.rst     | 27 +++++++-
>  Documentation/user/state.rst                  |  4 +-
>  arch/arm/dts/am335x-phytec-state.dtsi         |  2 +-
>  .../dts/fsl-ls1046a-tqmls1046a-mbls10xxa.dts  |  2 +-
>  arch/arm/dts/imx50-kindle-common.dtsi         |  2 +-
>  arch/arm/dts/imx51-zii-rdu1.dts               |  2 +-
>  arch/arm/dts/imx6dl-colibri-iris.dts          |  2 +-
>  arch/arm/dts/imx6qdl-phytec-mira.dtsi         |  2 +-
>  arch/arm/dts/imx6qdl-phytec-phycard-som.dtsi  |  2 +-
>  arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi  |  2 +-
>  arch/arm/dts/imx6qdl-phytec-state.dtsi        |  2 +-
>  arch/arm/dts/imx6qdl-zii-rdu2.dtsi            |  2 +-
>  arch/arm/dts/imx6ul-liteboard.dts             |  4 +-
>  arch/arm/dts/imx6ul-phytec-state.dtsi         |  2 +-
>  arch/arm/dts/imx6ul-tqma6ul-common.dtsi       |  4 +-
>  arch/arm/dts/imx6ul-webasto-ccbv2.dts         |  2 +-
>  arch/arm/dts/imx6ul-webasto-marvel.dts        |  2 +-
>  arch/arm/dts/imx7d-ac-sxb.dtsi                |  4 +-
>  arch/arm/dts/imx7d-flex-concentrator-mfg.dts  |  2 +-
>  arch/arm/dts/imx7d-gome-e143_01.dts           |  2 +-
>  arch/arm/dts/imx7d-phyboard-zeta.dts          |  2 +-
>  arch/arm/dts/imx7s-warp.dts                   |  2 +-
>  arch/arm/dts/imx8mm-innocomm-wb15-evk.dts     |  4 +-
>  arch/arm/dts/imx8mm-phyboard-polis-rdk.dts    |  4 +-
>  arch/arm/dts/imx8mp-debix-model-a.dts         |  4 +-
>  arch/arm/dts/imx8mp-debix-som-a-bmb-08.dts    |  4 +-
>  arch/arm/dts/imx8mp-karo-qsxp-ml81.dtsi       |  2 +-
>  .../dts/imx8mp-var-dart-dt8mcustomboard.dts   | 25 ++++----
>  arch/arm/dts/rk3566-cm3-io.dts                |  4 +-
>  arch/arm/dts/rk3566-pinetab2.dtsi             |  4 +-
>  arch/arm/dts/rk3568-bpi-r2-pro.dts            |  4 +-
>  arch/arm/dts/rk3568-evb1-v10.dts              |  4 +-
>  arch/arm/dts/rk3568-mecsbc.dts                |  4 +-
>  arch/arm/dts/rk3568-rock-3a.dts               |  4 +-
>  arch/arm/dts/rk3568-wolfvision-pf5.dts        |  2 +-
>  arch/arm/dts/rk3588-orangepi-5-plus.dts       |  4 +-
>  arch/arm/dts/rk3588-rock-5b.dts               |  4 +-
>  arch/arm/dts/socfpga_arria10_achilles.dts     |  2 +-
>  arch/arm/dts/socfpga_arria10_mercury_aa1.dts  |  2 +-
>  arch/arm/dts/state-example.dtsi               |  4 +-
>  drivers/of/base.c                             |  6 +-
>  drivers/of/of_path.c                          |  9 ++-
>  drivers/of/partition.c                        | 62 ++++++++++++-------
>  include/of.h                                  |  6 ++
>  44 files changed, 149 insertions(+), 96 deletions(-)
> 
> -- 
> 2.39.5
> 
> 
> 



  parent reply	other threads:[~2025-02-17 19:26 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-17 18:08 Ahmad Fatoum
2025-02-17 18:08 ` [PATCH 1/6] of: factor out of_node_is_fixed_partitions check Ahmad Fatoum
2025-02-17 18:08 ` [PATCH 2/6] of: of_path: support barebox,fixed-partitions Ahmad Fatoum
2025-02-17 18:08 ` [PATCH 3/6] ARM: IMX8MP: var-dart-dt8mcustomboard.dts: use new-style partition binding Ahmad Fatoum
2025-02-17 18:08 ` [PATCH 4/6] ARM: dts: prefix all non-MTD fixed-partitions with barebox, Ahmad Fatoum
2025-02-17 18:08 ` [PATCH 5/6] of: partition: refactor of_partition_binding checks into switch Ahmad Fatoum
2025-02-17 18:08 ` [PATCH 6/6] of: partition: add Linux CONFIG_OF_PARTITION-compatible adaptive fixup mode Ahmad Fatoum
2025-02-17 19:25 ` Marco Felsch [this message]
2025-02-17 19:57   ` [PATCH 0/6] " Ahmad Fatoum
2025-02-20  8:26 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250217192523.crgvcg2phxhce46d@pengutronix.de \
    --to=m.felsch@pengutronix.de \
    --cc=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox