From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 00/30] mci: imx-esdhc: add HS200 support
Date: Mon, 5 May 2025 14:06:03 +0200 [thread overview]
Message-ID: <20250505120633.3717186-1-a.fatoum@pengutronix.de> (raw)
On my i.MX8MP board this increases sequential read three-fold.
I also got HS400ES running, but it gives me occasional CRC errors, so
this series only concerns itself with HS200 for now.
Ahmad Fatoum (30):
mci: sdhci: fix SDHCI_TRNS_AUTO_CMD12 definition
mci: move most recent I/O settings into mci_host::ios
mci: use struct mci_host::ios inside mci_set_ios
mci: tuning: fix fallback to DDR52
mci: sdhci: unmap DMA buffers on timeout
mci: add MMC_CAP_UHS constants
mci: rename MMC_CAP_MMC_x_yV_DDR to MMC_CAP_x_yV_DDR as in Linux
mci: compare host and card caps for supported speeds
mci: print HS200 capabilities in devinfo
mci: respect no-1-8-v OF property
mci: sdhci: add support for struct mci_data::timeout_ns
mci: imx-esdhc: use unsigned types where appropriate
mci: imx-esdhc: implement esdhc_poll using sdhci_read32_poll_timeout
mci: imx-esdhc: drop one extra read of SDHCI_INT_STATUS
mci: sdhci: add cmd parameter to sdhci_transfer_*
mci: arasan: introduce mmc_op_tuning helper
mci: imx-esdhc: flesh out register description
mci: imx-esdhc: add support for delay/tuning properties in DT
mci: add mci_set_timing helper
mci: imx-esdhc: add support for setting drive strength
mci: sdhci: move SDHCI_MAKE_BLKSZ definition to header
mci: imx-esdhc: select different pinctrl state depending on frequency
mci: core: retry MMC_CMD_SET_BLOCKLEN up to 4 times
mci: imx-esdhc: don't reconfigure clock unless required
mci: sdhci: fix sdhci_transfer_data MMC_SEND_TUNING compatibility
mci: core: implement mmc_send_tuning
mci: imx-esdhc: set burst_length_enable
mci: imx-esdhc: fixup quirks in standard SDHCI registers
mci: sdhci: support Linux SDHCI_QUIRK2_BROKEN_HS200 flag
mci: imx-esdhc: implement HS200 support
drivers/mci/am654-sdhci.c | 15 +-
drivers/mci/arasan-sdhci.c | 26 +-
drivers/mci/atmel-sdhci-common.c | 2 +-
drivers/mci/atmel_mci.c | 4 +-
drivers/mci/dwcmshc-sdhci.c | 8 +-
drivers/mci/imx-esdhc-common.c | 337 +++++++++++++++++++++-----
drivers/mci/imx-esdhc.c | 346 +++++++++++++++++++++++++--
drivers/mci/imx-esdhc.h | 96 +++++++-
drivers/mci/mci-bcm2835.c | 2 +-
drivers/mci/mci-core.c | 331 ++++++++++++++++++-------
drivers/mci/mmci.c | 18 +-
drivers/mci/rockchip-dwcmshc-sdhci.c | 11 +-
drivers/mci/sdhci.c | 155 +++++++++---
drivers/mci/sdhci.h | 28 ++-
drivers/mci/stm32_sdmmc2.c | 16 +-
include/mci.h | 47 +++-
16 files changed, 1190 insertions(+), 252 deletions(-)
--
2.39.5
next reply other threads:[~2025-05-05 12:08 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-05 12:06 Ahmad Fatoum [this message]
2025-05-05 12:06 ` [PATCH 01/30] mci: sdhci: fix SDHCI_TRNS_AUTO_CMD12 definition Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 02/30] mci: move most recent I/O settings into mci_host::ios Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 03/30] mci: use struct mci_host::ios inside mci_set_ios Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 04/30] mci: tuning: fix fallback to DDR52 Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 05/30] mci: sdhci: unmap DMA buffers on timeout Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 06/30] mci: add MMC_CAP_UHS constants Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 07/30] mci: rename MMC_CAP_MMC_x_yV_DDR to MMC_CAP_x_yV_DDR as in Linux Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 08/30] mci: compare host and card caps for supported speeds Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 09/30] mci: print HS200 capabilities in devinfo Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 10/30] mci: respect no-1-8-v OF property Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 11/30] mci: sdhci: add support for struct mci_data::timeout_ns Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 12/30] mci: imx-esdhc: use unsigned types where appropriate Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 13/30] mci: imx-esdhc: implement esdhc_poll using sdhci_read32_poll_timeout Ahmad Fatoum
2025-05-06 6:25 ` Sascha Hauer
2025-05-05 12:06 ` [PATCH 14/30] mci: imx-esdhc: drop one extra read of SDHCI_INT_STATUS Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 15/30] mci: sdhci: add cmd parameter to sdhci_transfer_* Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 16/30] mci: arasan: introduce mmc_op_tuning helper Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 17/30] mci: imx-esdhc: flesh out register description Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 18/30] mci: imx-esdhc: add support for delay/tuning properties in DT Ahmad Fatoum
2025-05-06 6:37 ` Sascha Hauer
2025-05-05 12:06 ` [PATCH 19/30] mci: add mci_set_timing helper Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 20/30] mci: imx-esdhc: add support for setting drive strength Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 21/30] mci: sdhci: move SDHCI_MAKE_BLKSZ definition to header Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 22/30] mci: imx-esdhc: select different pinctrl state depending on frequency Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 23/30] mci: core: retry MMC_CMD_SET_BLOCKLEN up to 4 times Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 24/30] mci: imx-esdhc: don't reconfigure clock unless required Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 25/30] mci: sdhci: fix sdhci_transfer_data MMC_SEND_TUNING compatibility Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 26/30] mci: core: implement mmc_send_tuning Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 27/30] mci: imx-esdhc: set burst_length_enable Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 28/30] mci: imx-esdhc: fixup quirks in standard SDHCI registers Ahmad Fatoum
2025-05-06 7:11 ` Sascha Hauer
2025-05-05 12:06 ` [PATCH 29/30] mci: sdhci: support Linux SDHCI_QUIRK2_BROKEN_HS200 flag Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 30/30] mci: imx-esdhc: implement HS200 support Ahmad Fatoum
2025-05-05 12:41 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250505120633.3717186-1-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox