mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 12/30] mci: imx-esdhc: use unsigned types where appropriate
Date: Mon,  5 May 2025 14:06:15 +0200	[thread overview]
Message-ID: <20250505120633.3717186-13-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20250505120633.3717186-1-a.fatoum@pengutronix.de>

clock rate and register values are both unsigned quantities, so
use the proper types for them.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 drivers/mci/imx-esdhc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mci/imx-esdhc.c b/drivers/mci/imx-esdhc.c
index 923dae9cf3b0..2e6066b20308 100644
--- a/drivers/mci/imx-esdhc.c
+++ b/drivers/mci/imx-esdhc.c
@@ -48,7 +48,7 @@ static void set_sysctl(struct mci_host *mci, u32 clock, bool ddr)
 {
 	int div, pre_div, ddr_pre_div = 1;
 	struct fsl_esdhc_host *host = to_fsl_esdhc(mci);
-	int sdhc_clk = clk_get_rate(host->clk);
+	unsigned sdhc_clk = clk_get_rate(host->clk);
 	u32 clk;
 	unsigned long  cur_clock;
 
@@ -199,7 +199,7 @@ static int esdhc_card_present(struct mci_host *mci)
 
 static int esdhc_reset(struct fsl_esdhc_host *host)
 {
-	int val;
+	u32 val;
 
 	/* reset the controller */
 	sdhci_write32(&host->sdhci, SDHCI_CLOCK_CONTROL__TIMEOUT_CONTROL__SOFTWARE_RESET,
-- 
2.39.5




  parent reply	other threads:[~2025-05-05 12:39 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-05 12:06 [PATCH 00/30] mci: imx-esdhc: add HS200 support Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 01/30] mci: sdhci: fix SDHCI_TRNS_AUTO_CMD12 definition Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 02/30] mci: move most recent I/O settings into mci_host::ios Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 03/30] mci: use struct mci_host::ios inside mci_set_ios Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 04/30] mci: tuning: fix fallback to DDR52 Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 05/30] mci: sdhci: unmap DMA buffers on timeout Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 06/30] mci: add MMC_CAP_UHS constants Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 07/30] mci: rename MMC_CAP_MMC_x_yV_DDR to MMC_CAP_x_yV_DDR as in Linux Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 08/30] mci: compare host and card caps for supported speeds Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 09/30] mci: print HS200 capabilities in devinfo Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 10/30] mci: respect no-1-8-v OF property Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 11/30] mci: sdhci: add support for struct mci_data::timeout_ns Ahmad Fatoum
2025-05-05 12:06 ` Ahmad Fatoum [this message]
2025-05-05 12:06 ` [PATCH 13/30] mci: imx-esdhc: implement esdhc_poll using sdhci_read32_poll_timeout Ahmad Fatoum
2025-05-06  6:25   ` Sascha Hauer
2025-05-05 12:06 ` [PATCH 14/30] mci: imx-esdhc: drop one extra read of SDHCI_INT_STATUS Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 15/30] mci: sdhci: add cmd parameter to sdhci_transfer_* Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 16/30] mci: arasan: introduce mmc_op_tuning helper Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 17/30] mci: imx-esdhc: flesh out register description Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 18/30] mci: imx-esdhc: add support for delay/tuning properties in DT Ahmad Fatoum
2025-05-06  6:37   ` Sascha Hauer
2025-05-05 12:06 ` [PATCH 19/30] mci: add mci_set_timing helper Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 20/30] mci: imx-esdhc: add support for setting drive strength Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 21/30] mci: sdhci: move SDHCI_MAKE_BLKSZ definition to header Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 22/30] mci: imx-esdhc: select different pinctrl state depending on frequency Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 23/30] mci: core: retry MMC_CMD_SET_BLOCKLEN up to 4 times Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 24/30] mci: imx-esdhc: don't reconfigure clock unless required Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 25/30] mci: sdhci: fix sdhci_transfer_data MMC_SEND_TUNING compatibility Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 26/30] mci: core: implement mmc_send_tuning Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 27/30] mci: imx-esdhc: set burst_length_enable Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 28/30] mci: imx-esdhc: fixup quirks in standard SDHCI registers Ahmad Fatoum
2025-05-06  7:11   ` Sascha Hauer
2025-05-05 12:06 ` [PATCH 29/30] mci: sdhci: support Linux SDHCI_QUIRK2_BROKEN_HS200 flag Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 30/30] mci: imx-esdhc: implement HS200 support Ahmad Fatoum
2025-05-05 12:41   ` Ahmad Fatoum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250505120633.3717186-13-a.fatoum@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox