From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 03/30] mci: use struct mci_host::ios inside mci_set_ios
Date: Mon, 5 May 2025 14:06:06 +0200 [thread overview]
Message-ID: <20250505120633.3717186-4-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20250505120633.3717186-1-a.fatoum@pengutronix.de>
Now that we have a struct mci_ios inside struct mci_host, let's make use
of it directly in mci_set_ios instead of copying out the struct members
one by one.
While at it, let's also add a debug print describing the configuration
being applied.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/mci/mci-core.c | 48 +++++++++++++++++++++---------------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
index 498ea71d96c6..54d3fab4f10c 100644
--- a/drivers/mci/mci-core.c
+++ b/drivers/mci/mci-core.c
@@ -1024,6 +1024,24 @@ static int sd_change_freq(struct mci *mci)
return 0;
}
+static const char *mci_timing_tostr(unsigned timing)
+{
+ switch (timing) {
+ case MMC_TIMING_LEGACY:
+ return "legacy";
+ case MMC_TIMING_MMC_HS:
+ return "MMC HS";
+ case MMC_TIMING_SD_HS:
+ return "SD HS";
+ case MMC_TIMING_MMC_DDR52:
+ return "MMC DDR52";
+ case MMC_TIMING_MMC_HS200:
+ return "HS200";
+ default:
+ return "unknown"; /* shouldn't happen */
+ }
+}
+
/**
* Setup host's interface bus width and transfer frequency
* @param mci MCI instance
@@ -1031,13 +1049,13 @@ static int sd_change_freq(struct mci *mci)
static void mci_set_ios(struct mci *mci)
{
struct mci_host *host = mci->host;
- struct mci_ios ios = {
- .bus_width = host->ios.bus_width,
- .clock = host->ios.clock,
- .timing = host->ios.timing,
- };
+ struct mci_ios *ios = &host->ios;
- host->ops.set_ios(host, &ios);
+ dev_dbg(&mci->dev, "clock %u.%uMHz width %u timing %s\n",
+ ios->clock / 1000000, ios->clock % 1000000,
+ 1 << ios->bus_width, mci_timing_tostr(ios->timing));
+
+ host->ops.set_ios(host, ios);
host->actual_clock = host->ios.clock;
}
@@ -2313,24 +2331,6 @@ static int mci_sd_read(struct block_device *blk, void *buffer, sector_t block,
/* ------------------ attach to the device API --------------------------- */
-static const char *mci_timing_tostr(unsigned timing)
-{
- switch (timing) {
- case MMC_TIMING_LEGACY:
- return "legacy";
- case MMC_TIMING_MMC_HS:
- return "MMC HS";
- case MMC_TIMING_SD_HS:
- return "SD HS";
- case MMC_TIMING_MMC_DDR52:
- return "MMC DDR52";
- case MMC_TIMING_MMC_HS200:
- return "HS200";
- default:
- return "unknown"; /* shouldn't happen */
- }
-}
-
static void mci_print_caps(unsigned caps)
{
printf(" capabilities: %s%s%s%s%s%s%s%s\n",
--
2.39.5
next prev parent reply other threads:[~2025-05-05 12:08 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-05 12:06 [PATCH 00/30] mci: imx-esdhc: add HS200 support Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 01/30] mci: sdhci: fix SDHCI_TRNS_AUTO_CMD12 definition Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 02/30] mci: move most recent I/O settings into mci_host::ios Ahmad Fatoum
2025-05-05 12:06 ` Ahmad Fatoum [this message]
2025-05-05 12:06 ` [PATCH 04/30] mci: tuning: fix fallback to DDR52 Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 05/30] mci: sdhci: unmap DMA buffers on timeout Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 06/30] mci: add MMC_CAP_UHS constants Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 07/30] mci: rename MMC_CAP_MMC_x_yV_DDR to MMC_CAP_x_yV_DDR as in Linux Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 08/30] mci: compare host and card caps for supported speeds Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 09/30] mci: print HS200 capabilities in devinfo Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 10/30] mci: respect no-1-8-v OF property Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 11/30] mci: sdhci: add support for struct mci_data::timeout_ns Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 12/30] mci: imx-esdhc: use unsigned types where appropriate Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 13/30] mci: imx-esdhc: implement esdhc_poll using sdhci_read32_poll_timeout Ahmad Fatoum
2025-05-06 6:25 ` Sascha Hauer
2025-05-05 12:06 ` [PATCH 14/30] mci: imx-esdhc: drop one extra read of SDHCI_INT_STATUS Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 15/30] mci: sdhci: add cmd parameter to sdhci_transfer_* Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 16/30] mci: arasan: introduce mmc_op_tuning helper Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 17/30] mci: imx-esdhc: flesh out register description Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 18/30] mci: imx-esdhc: add support for delay/tuning properties in DT Ahmad Fatoum
2025-05-06 6:37 ` Sascha Hauer
2025-05-05 12:06 ` [PATCH 19/30] mci: add mci_set_timing helper Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 20/30] mci: imx-esdhc: add support for setting drive strength Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 21/30] mci: sdhci: move SDHCI_MAKE_BLKSZ definition to header Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 22/30] mci: imx-esdhc: select different pinctrl state depending on frequency Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 23/30] mci: core: retry MMC_CMD_SET_BLOCKLEN up to 4 times Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 24/30] mci: imx-esdhc: don't reconfigure clock unless required Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 25/30] mci: sdhci: fix sdhci_transfer_data MMC_SEND_TUNING compatibility Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 26/30] mci: core: implement mmc_send_tuning Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 27/30] mci: imx-esdhc: set burst_length_enable Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 28/30] mci: imx-esdhc: fixup quirks in standard SDHCI registers Ahmad Fatoum
2025-05-06 7:11 ` Sascha Hauer
2025-05-05 12:06 ` [PATCH 29/30] mci: sdhci: support Linux SDHCI_QUIRK2_BROKEN_HS200 flag Ahmad Fatoum
2025-05-05 12:06 ` [PATCH 30/30] mci: imx-esdhc: implement HS200 support Ahmad Fatoum
2025-05-05 12:41 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250505120633.3717186-4-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox