[PATCH v2 14/30] mci: imx-esdhc: drop one extra read of SDHCI_INT_STATUS

[Ahmad Fatoum <a.fatoum@pengutronix.de>]

Our new esdhc_poll implementation stores the register value read for
later use, so make use of it instead of reading the same register again
after the break condition has been triggered.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 drivers/mci/imx-esdhc-common.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/mci/imx-esdhc-common.c b/drivers/mci/imx-esdhc-common.c
index 0743e7b74d22..18a9f3be7239 100644
--- a/drivers/mci/imx-esdhc-common.c
+++ b/drivers/mci/imx-esdhc-common.c
@@ -121,16 +121,14 @@ int __esdhc_send_cmd(struct fsl_esdhc_host *host, struct mci_cmd *cmd,
 		      command << 16 | xfertyp);
 
 	/* Wait for the command to complete */
-	ret = esdhc_poll(host, SDHCI_INT_STATUS, val,
-			 val & SDHCI_INT_CMD_COMPLETE,
+	ret = esdhc_poll(host, SDHCI_INT_STATUS, irqstat,
+			 irqstat & SDHCI_INT_CMD_COMPLETE,
 			 100 * MSECOND);
 	if (ret) {
 		dev_dbg(host->dev, "timeout 1\n");
 		goto undo_setup_data;
 	}
 
-	irqstat = sdhci_read32(&host->sdhci, SDHCI_INT_STATUS);
-
 	if (irqstat & CMD_ERR) {
 		ret = -EIO;
 		goto undo_setup_data;
-- 
2.39.5