From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH v2 21/30] mci: sdhci: move SDHCI_MAKE_BLKSZ definition to header
Date: Wed, 7 May 2025 10:22:00 +0200 [thread overview]
Message-ID: <20250507082209.3289972-22-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20250507082209.3289972-1-a.fatoum@pengutronix.de>
This is going to be used outside of sdhci.c, so move it into the header.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/mci/sdhci.c | 1 -
drivers/mci/sdhci.h | 1 +
2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mci/sdhci.c b/drivers/mci/sdhci.c
index b86b3f3d8d1c..3051354a3076 100644
--- a/drivers/mci/sdhci.c
+++ b/drivers/mci/sdhci.c
@@ -10,7 +10,6 @@
#include "sdhci.h"
#define MAX_TUNING_LOOP 40
-#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
enum sdhci_reset_reason {
SDHCI_RESET_FOR_INIT,
diff --git a/drivers/mci/sdhci.h b/drivers/mci/sdhci.h
index 31edebab1262..e0436425fbda 100644
--- a/drivers/mci/sdhci.h
+++ b/drivers/mci/sdhci.h
@@ -25,6 +25,7 @@
#define SDHCI_DEFAULT_BOUNDARY_ARG SDHCI_DMA_BOUNDARY_512K
#define SDHCI_TRANSFER_BLOCK_SIZE(x) ((x) & 0xfff)
#define SDHCI_BLOCK_COUNT 0x06
+#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
#define SDHCI_ARGUMENT 0x08
#define SDHCI_TRANSFER_MODE__COMMAND 0x0c
#define SDHCI_TRANSFER_MODE 0x0c
--
2.39.5
next prev parent reply other threads:[~2025-05-07 9:27 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-07 8:21 [PATCH v2 00/30] mci: imx-esdhc: add HS200 support Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 01/30] mci: sdhci: fix SDHCI_TRNS_AUTO_CMD12 definition Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 02/30] mci: move most recent I/O settings into mci_host::ios Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 03/30] mci: use struct mci_host::ios inside mci_set_ios Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 04/30] mci: tuning: fix fallback to DDR52 Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 05/30] mci: sdhci: unmap DMA buffers on timeout Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 06/30] mci: add MMC_CAP_UHS constants Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 07/30] mci: rename MMC_CAP_MMC_x_yV_DDR to MMC_CAP_x_yV_DDR as in Linux Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 08/30] mci: compare host and card caps for supported speeds Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 09/30] mci: print HS200 capabilities in devinfo Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 10/30] mci: respect no-1-8-v OF property Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 11/30] mci: sdhci: add support for struct mci_data::timeout_ns Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 12/30] mci: imx-esdhc: use unsigned types where appropriate Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 13/30] mci: imx-esdhc: implement esdhc_poll using sdhci_read32_poll_timeout Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 14/30] mci: imx-esdhc: drop one extra read of SDHCI_INT_STATUS Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 15/30] mci: sdhci: add cmd parameter to sdhci_transfer_* Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 16/30] mci: arasan: introduce mmc_op_tuning helper Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 17/30] mci: imx-esdhc: flesh out register description Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 18/30] mci: imx-esdhc: add support for delay/tuning properties in DT Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 19/30] mci: add mci_set_timing helper Ahmad Fatoum
2025-05-07 8:21 ` [PATCH v2 20/30] mci: imx-esdhc: add support for setting drive strength Ahmad Fatoum
2025-05-07 8:22 ` Ahmad Fatoum [this message]
2025-05-07 8:22 ` [PATCH v2 22/30] mci: imx-esdhc: select different pinctrl state depending on frequency Ahmad Fatoum
2025-05-07 8:22 ` [PATCH v2 23/30] mci: core: retry MMC_CMD_SET_BLOCKLEN up to 4 times Ahmad Fatoum
2025-05-07 8:22 ` [PATCH v2 24/30] mci: imx-esdhc: don't reconfigure clock unless required Ahmad Fatoum
2025-05-07 8:22 ` [PATCH v2 25/30] mci: sdhci: fix sdhci_transfer_data MMC_SEND_TUNING compatibility Ahmad Fatoum
2025-05-07 8:22 ` [PATCH v2 26/30] mci: core: implement mmc_send_tuning Ahmad Fatoum
2025-05-07 8:22 ` [PATCH v2 27/30] mci: imx-esdhc: set burst_length_enable Ahmad Fatoum
2025-05-07 8:22 ` [PATCH v2 28/30] mci: imx-esdhc: fixup quirks in standard SDHCI registers Ahmad Fatoum
2025-05-07 8:22 ` [PATCH v2 29/30] mci: sdhci: support Linux SDHCI_QUIRK2_BROKEN_HS200 flag Ahmad Fatoum
2025-05-07 8:22 ` [PATCH v2 30/30] mci: imx-esdhc: implement HS200 support Ahmad Fatoum
2025-05-08 7:30 ` [PATCH v2 00/30] mci: imx-esdhc: add " Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250507082209.3289972-22-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox