mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH v2 04/30] mci: tuning: fix fallback to DDR52
Date: Wed,  7 May 2025 10:21:43 +0200	[thread overview]
Message-ID: <20250507082209.3289972-5-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20250507082209.3289972-1-a.fatoum@pengutronix.de>

When CONFIG_MCI_TUNING is enabled, but a card mmc_card_hs200 return
false, the fallback currently puts the card into high speed mode instead
of DDR52, which would've been the next best thing.

Rework the code to fix this.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 drivers/mci/mci-core.c | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
index 7b33b4c8df88..5a3bb9d1ad13 100644
--- a/drivers/mci/mci-core.c
+++ b/drivers/mci/mci-core.c
@@ -1781,34 +1781,35 @@ static int mci_startup_mmc(struct mci *mci)
 	}
 
 	if (IS_ENABLED(CONFIG_MCI_TUNING)) {
-		/*
-		 * Select timing interface
-		 */
+		dev_dbg(&mci->dev, "select timing %s\n", mci_timing_tostr(host->ios.timing));
+
 		ret = mmc_select_timing(mci);
 		if (ret)
 			return ret;
 
-		if (mmc_card_hs200(mci))
+		if (mmc_card_hs200(mci)) {
 			ret = mmc_hs200_tuning(mci);
+			if (!ret) {
+				dev_dbg(&mci->dev, "HS200 tuning succeeded\n");
+				return 0;
+			}
+
+			dev_dbg(&mci->dev, "HS200 tuning failed, falling back to HS\n");
 
-		if (ret) {
 			host->ios.timing = MMC_TIMING_MMC_HS;
 			mci_switch(mci, EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS);
 		}
 	}
 
-	if (ret || !IS_ENABLED(CONFIG_MCI_TUNING)) {
-		mci_set_clock(mci, mci->tran_speed);
+	mci_set_clock(mci, mci->tran_speed);
 
-		/* find out maximum bus width and then try DDR if supported */
-		ret = mci_mmc_select_bus_width(mci);
-		if (ret > MMC_BUS_WIDTH_1 && mci->tran_speed == 52000000)
-			ret = mci_mmc_select_hs_ddr(mci);
+	/* find out maximum bus width and then try DDR if supported */
+	ret = mci_mmc_select_bus_width(mci);
+	if (ret > MMC_BUS_WIDTH_1 && mci->tran_speed == 52000000)
+		ret = mci_mmc_select_hs_ddr(mci);
 
-		if (ret < 0) {
-			dev_warn(&mci->dev, "Changing MMC bus width failed: %d\n", ret);
-		}
-	}
+	if (ret < 0)
+		dev_warn(&mci->dev, "Changing MMC bus width failed: %d\n", ret);
 
 	return ret >= MMC_BUS_WIDTH_1 ? 0 : ret;
 }
-- 
2.39.5




  parent reply	other threads:[~2025-05-07  9:19 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-07  8:21 [PATCH v2 00/30] mci: imx-esdhc: add HS200 support Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 01/30] mci: sdhci: fix SDHCI_TRNS_AUTO_CMD12 definition Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 02/30] mci: move most recent I/O settings into mci_host::ios Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 03/30] mci: use struct mci_host::ios inside mci_set_ios Ahmad Fatoum
2025-05-07  8:21 ` Ahmad Fatoum [this message]
2025-05-07  8:21 ` [PATCH v2 05/30] mci: sdhci: unmap DMA buffers on timeout Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 06/30] mci: add MMC_CAP_UHS constants Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 07/30] mci: rename MMC_CAP_MMC_x_yV_DDR to MMC_CAP_x_yV_DDR as in Linux Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 08/30] mci: compare host and card caps for supported speeds Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 09/30] mci: print HS200 capabilities in devinfo Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 10/30] mci: respect no-1-8-v OF property Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 11/30] mci: sdhci: add support for struct mci_data::timeout_ns Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 12/30] mci: imx-esdhc: use unsigned types where appropriate Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 13/30] mci: imx-esdhc: implement esdhc_poll using sdhci_read32_poll_timeout Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 14/30] mci: imx-esdhc: drop one extra read of SDHCI_INT_STATUS Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 15/30] mci: sdhci: add cmd parameter to sdhci_transfer_* Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 16/30] mci: arasan: introduce mmc_op_tuning helper Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 17/30] mci: imx-esdhc: flesh out register description Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 18/30] mci: imx-esdhc: add support for delay/tuning properties in DT Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 19/30] mci: add mci_set_timing helper Ahmad Fatoum
2025-05-07  8:21 ` [PATCH v2 20/30] mci: imx-esdhc: add support for setting drive strength Ahmad Fatoum
2025-05-07  8:22 ` [PATCH v2 21/30] mci: sdhci: move SDHCI_MAKE_BLKSZ definition to header Ahmad Fatoum
2025-05-07  8:22 ` [PATCH v2 22/30] mci: imx-esdhc: select different pinctrl state depending on frequency Ahmad Fatoum
2025-05-07  8:22 ` [PATCH v2 23/30] mci: core: retry MMC_CMD_SET_BLOCKLEN up to 4 times Ahmad Fatoum
2025-05-07  8:22 ` [PATCH v2 24/30] mci: imx-esdhc: don't reconfigure clock unless required Ahmad Fatoum
2025-05-07  8:22 ` [PATCH v2 25/30] mci: sdhci: fix sdhci_transfer_data MMC_SEND_TUNING compatibility Ahmad Fatoum
2025-05-07  8:22 ` [PATCH v2 26/30] mci: core: implement mmc_send_tuning Ahmad Fatoum
2025-05-07  8:22 ` [PATCH v2 27/30] mci: imx-esdhc: set burst_length_enable Ahmad Fatoum
2025-05-07  8:22 ` [PATCH v2 28/30] mci: imx-esdhc: fixup quirks in standard SDHCI registers Ahmad Fatoum
2025-05-07  8:22 ` [PATCH v2 29/30] mci: sdhci: support Linux SDHCI_QUIRK2_BROKEN_HS200 flag Ahmad Fatoum
2025-05-07  8:22 ` [PATCH v2 30/30] mci: imx-esdhc: implement HS200 support Ahmad Fatoum
2025-05-08  7:30 ` [PATCH v2 00/30] mci: imx-esdhc: add " Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250507082209.3289972-5-a.fatoum@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox