From: Marco Felsch <m.felsch@pengutronix.de>
To: Michael Tretter <m.tretter@pengutronix.de>
Cc: BAREBOX <barebox@lists.infradead.org>
Subject: Re: [PATCH 7/9] ARM: rockchip: dmc: add rk3588_ram_sizes to get full ram size
Date: Mon, 26 May 2025 18:33:28 +0200 [thread overview]
Message-ID: <20250526163328.66vokf3qcnsrtsjz@pengutronix.de> (raw)
In-Reply-To: <20250526-rk3588-optee-v1-7-5004995cbd03@pengutronix.de>
On 25-05-26, Michael Tretter wrote:
> The PBL has to pass a full description of the SDRAM to OP-TEE to allow
> OP-TEE to handle dynamic shared memory in the entire SDRAM. Thus, the
> PBL needs to read the full memory configuration.
>
> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
> ---
> arch/arm/mach-rockchip/dmc.c | 37 ++++++++++++++++++++++++++++++++++---
> include/mach/rockchip/dmc.h | 2 ++
> 2 files changed, 36 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-rockchip/dmc.c b/arch/arm/mach-rockchip/dmc.c
> index 62a7ef8f1e38e989e84f08f6f4a6586be3e85532..260b8be9c7da9e8f83323822eab92a439ef4e2ef 100644
> --- a/arch/arm/mach-rockchip/dmc.c
> +++ b/arch/arm/mach-rockchip/dmc.c
> @@ -171,11 +171,12 @@ resource_size_t rk3568_ram0_size(void)
> #define RK3588_PMUGRF_OS_REG4 0x210
> #define RK3588_PMUGRF_OS_REG5 0x214
>
> -resource_size_t rk3588_ram0_size(void)
> +size_t rk3588_ram_sizes(phys_addr_t *base, resource_size_t *size, size_t n)
Nit: could be void since you don't check the return value.
Regards,
Marco
> {
> void __iomem *pmugrf = IOMEM(RK3588_PMUGRF_BASE);
> u32 sys_reg2, sys_reg3, sys_reg4, sys_reg5;
> - resource_size_t size, size1, size2;
> + resource_size_t memsize, size1, size2;
> + size_t i = 0;
>
> sys_reg2 = readl(pmugrf + RK3588_PMUGRF_OS_REG2);
> sys_reg3 = readl(pmugrf + RK3588_PMUGRF_OS_REG3);
> @@ -187,7 +188,37 @@ resource_size_t rk3588_ram0_size(void)
>
> pr_info("%s() size1 = 0x%08llx, size2 = 0x%08llx\n", __func__, (u64)size1, (u64)size2);
>
> - size = min_t(resource_size_t, RK3588_INT_REG_START, size1 + size2);
> + memsize = size1 + size2;
> +
> + base[i] = 0xa00000;
> + size[i] = min_t(resource_size_t, RK3588_INT_REG_START, memsize) - 0xa00000;
> + i++;
> +
> + if (i < n && memsize > SZ_4G) {
> + base[i] = SZ_4G;
> + size[i] = min_t(unsigned long, DRAM_GAP1_START, memsize) - SZ_4G;
> + i++;
> + }
> + if (i < n && memsize > DRAM_GAP1_END) {
> + base[i] = DRAM_GAP1_END;
> + size[i] = min_t(unsigned long, DRAM_GAP2_START, memsize) - DRAM_GAP1_END;
> + i++;
> + }
> + if (i < n && memsize > DRAM_GAP2_END) {
> + base[i] = DRAM_GAP2_END;
> + size[i] = memsize - DRAM_GAP2_END;
> + i++;
> + }
> +
> + return i;
> +}
> +
> +resource_size_t rk3588_ram0_size(void)
> +{
> + phys_addr_t base;
> + resource_size_t size;
> +
> + rk3588_ram_sizes(&base, &size, 1);
>
> return size;
> }
> diff --git a/include/mach/rockchip/dmc.h b/include/mach/rockchip/dmc.h
> index 3df9aa5e9c87857e9ac3994e0e40c60d8c91b0a4..bb5a5afd02417920446c729b96eeb90f1fa0ead0 100644
> --- a/include/mach/rockchip/dmc.h
> +++ b/include/mach/rockchip/dmc.h
> @@ -87,4 +87,6 @@ resource_size_t rk3399_ram0_size(void);
> resource_size_t rk3568_ram0_size(void);
> resource_size_t rk3588_ram0_size(void);
>
> +size_t rk3588_ram_sizes(phys_addr_t *base, resource_size_t *size, size_t n);
> +
> #endif
>
> --
> 2.39.5
>
>
>
next prev parent reply other threads:[~2025-05-26 16:34 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-26 14:38 [PATCH 0/9] ARM: rockchip: fix dynamic shared memory in OP-TEE Michael Tretter
2025-05-26 14:38 ` [PATCH 1/9] ARM: rockchip: fix formatting Michael Tretter
2025-05-26 17:30 ` Marco Felsch
2025-05-26 14:38 ` [PATCH 2/9] ARM: rockchip: dmc: use RK3588_INT_REG_START for rk3588 Michael Tretter
2025-05-26 17:29 ` Marco Felsch
2025-05-26 14:38 ` [PATCH 3/9] lib: fdt: add fdt_addresses Michael Tretter
2025-05-26 17:29 ` Marco Felsch
2025-05-26 14:38 ` [PATCH 4/9] PBL: fdt: refactor helper for reading nr of cells Michael Tretter
2025-05-26 17:30 ` Marco Felsch
2025-05-26 14:38 ` [PATCH 5/9] PBL: fdt: make minimum fdt size configurable Michael Tretter
2025-05-27 6:41 ` Sascha Hauer
2025-05-27 8:48 ` Michael Tretter
2025-05-27 18:45 ` Sascha Hauer
2025-05-28 8:24 ` Michael Tretter
2025-05-26 14:38 ` [PATCH 6/9] PBL: fdt: add fdt_fixup_mem to fixup memory nodes Michael Tretter
2025-05-27 6:22 ` Sascha Hauer
2025-05-27 8:34 ` Michael Tretter
2025-05-27 18:51 ` Sascha Hauer
2025-05-26 14:38 ` [PATCH 7/9] ARM: rockchip: dmc: add rk3588_ram_sizes to get full ram size Michael Tretter
2025-05-26 16:33 ` Marco Felsch [this message]
2025-05-27 6:25 ` Sascha Hauer
2025-05-27 8:39 ` Michael Tretter
2025-05-27 9:06 ` Marco Felsch
2025-05-26 14:38 ` [PATCH 8/9] ARM: rockchip: pass device tree to TF-A Michael Tretter
2025-05-26 16:37 ` Marco Felsch
2025-05-27 8:03 ` Michael Tretter
2025-05-26 14:38 ` [PATCH 9/9] ARM: rockchip: fixup memory in device tree for TF-A Michael Tretter
2025-05-26 17:25 ` Marco Felsch
2025-05-27 8:16 ` Michael Tretter
2025-05-27 9:40 ` Marco Felsch
2025-05-27 10:19 ` Michael Tretter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250526163328.66vokf3qcnsrtsjz@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=m.tretter@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox