mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Marco Felsch <m.felsch@pengutronix.de>
To: Michael Tretter <m.tretter@pengutronix.de>
Cc: BAREBOX <barebox@lists.infradead.org>
Subject: Re: [PATCH 9/9] ARM: rockchip: fixup memory in device tree for TF-A
Date: Mon, 26 May 2025 19:25:01 +0200	[thread overview]
Message-ID: <20250526172501.6fxqalqb7lbfgagk@pengutronix.de> (raw)
In-Reply-To: <20250526-rk3588-optee-v1-9-5004995cbd03@pengutronix.de>

Hi Michael,

On 25-05-26, Michael Tretter wrote:
> Add the memory nodes for the detected SDRAM configuration to the fdt
> before passing it to the TF-A.
> 
> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
> ---
>  arch/arm/mach-rockchip/atf.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm/mach-rockchip/atf.c b/arch/arm/mach-rockchip/atf.c
> index 12cf13717b6972c2eafc5a044ae8d0b4de029c32..342af302aa25089acce3c91df0ea38cbe71e0add 100644
> --- a/arch/arm/mach-rockchip/atf.c
> +++ b/arch/arm/mach-rockchip/atf.c
> @@ -173,6 +173,26 @@ void rk3588_atf_load_bl31(void *fdt)
>  	rockchip_atf_load_bl31(RK3588, rk3588_bl31_bin, rk3588_bl32_bin, fdt);
>  }
>  
> +#ifdef CONFIG_ARCH_ROCKCHIP_ATF_PASS_FDT
> +static int rk3588_fixup_mem(void *fdt)
> +{
> +	/* Use 4 blocks since rk3588 has 3 gaps in the address space */
> +	unsigned long base[4];
> +	unsigned long size[ARRAY_SIZE(base)];
> +	phys_addr_t base_tmp[ARRAY_SIZE(base)];
> +	resource_size_t size_tmp[ARRAY_SIZE(base_tmp)];
> +	int i, n;
> +
> +	n = rk3588_ram_sizes(base_tmp, size_tmp, ARRAY_SIZE(base_tmp));
> +	for (i = 0; i < n; i++) {
> +		base[i] = base_tmp[i];
> +		size[i] = size_tmp[i];
> +	}
> +
> +	return fdt_fixup_mem(fdt, base, size, i);

This fixup will run on a RO marked section if I got the code correct.
Also the fixup logic doesn't work for compressed device-tree's.

I had an offlist discussion with Ahmad last week exactly targeting such
use-case (passing the dt from firmware to firmware). The conclusion was
that each firmware should generate an overlay which will be applied to
the barebox live-dt and the kernel-dt later on.

Question: Is this to late for OP-TEE? I don't know the RK3588 nor the
OP-TEE integration for it, but on i.MX8M the OP-TEE SHM doesn't require
any device-tree yet.

Regards,
  Marco

> +}
> +#endif
> +
>  void __noreturn rk3588_barebox_entry(void *fdt)
>  {
>  	unsigned long membase, endmem;
> @@ -187,6 +207,8 @@ void __noreturn rk3588_barebox_entry(void *fdt)
>  		rockchip_store_bootrom_iram(IOMEM(RK3588_IRAM_BASE));
>  
>  #ifdef CONFIG_ARCH_ROCKCHIP_ATF_PASS_FDT
> +		if (rk3588_fixup_mem(fdt) != 0)
> +			pr_warn("Failed to fixup memory\n");
>  		rk3588_atf_load_bl31(fdt);
>  #else
>  		rk3588_atf_load_bl31(NULL);
> 
> -- 
> 2.39.5
> 
> 
> 



  reply	other threads:[~2025-05-26 17:25 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-26 14:38 [PATCH 0/9] ARM: rockchip: fix dynamic shared memory in OP-TEE Michael Tretter
2025-05-26 14:38 ` [PATCH 1/9] ARM: rockchip: fix formatting Michael Tretter
2025-05-26 17:30   ` Marco Felsch
2025-05-26 14:38 ` [PATCH 2/9] ARM: rockchip: dmc: use RK3588_INT_REG_START for rk3588 Michael Tretter
2025-05-26 17:29   ` Marco Felsch
2025-05-26 14:38 ` [PATCH 3/9] lib: fdt: add fdt_addresses Michael Tretter
2025-05-26 17:29   ` Marco Felsch
2025-05-26 14:38 ` [PATCH 4/9] PBL: fdt: refactor helper for reading nr of cells Michael Tretter
2025-05-26 17:30   ` Marco Felsch
2025-05-26 14:38 ` [PATCH 5/9] PBL: fdt: make minimum fdt size configurable Michael Tretter
2025-05-27  6:41   ` Sascha Hauer
2025-05-27  8:48     ` Michael Tretter
2025-05-27 18:45       ` Sascha Hauer
2025-05-28  8:24         ` Michael Tretter
2025-05-26 14:38 ` [PATCH 6/9] PBL: fdt: add fdt_fixup_mem to fixup memory nodes Michael Tretter
2025-05-27  6:22   ` Sascha Hauer
2025-05-27  8:34     ` Michael Tretter
2025-05-27 18:51       ` Sascha Hauer
2025-05-26 14:38 ` [PATCH 7/9] ARM: rockchip: dmc: add rk3588_ram_sizes to get full ram size Michael Tretter
2025-05-26 16:33   ` Marco Felsch
2025-05-27  6:25     ` Sascha Hauer
2025-05-27  8:39       ` Michael Tretter
2025-05-27  9:06         ` Marco Felsch
2025-05-26 14:38 ` [PATCH 8/9] ARM: rockchip: pass device tree to TF-A Michael Tretter
2025-05-26 16:37   ` Marco Felsch
2025-05-27  8:03     ` Michael Tretter
2025-05-26 14:38 ` [PATCH 9/9] ARM: rockchip: fixup memory in device tree for TF-A Michael Tretter
2025-05-26 17:25   ` Marco Felsch [this message]
2025-05-27  8:16     ` Michael Tretter
2025-05-27  9:40       ` Marco Felsch
2025-05-27 10:19         ` Michael Tretter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250526172501.6fxqalqb7lbfgagk@pengutronix.de \
    --to=m.felsch@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=m.tretter@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox