[PATCH v2 20/33] ARM: dts: am62l evm: Add ethernet ports

[Sascha Hauer <s.hauer@pengutronix.de>]

The AM62l device trees are based on the upstream submission which
currently lack the ethernet ports. Add them from the downstream Linux
repository.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/dts/k3-am62l3-evm.dts | 78 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)

diff --git a/arch/arm/dts/k3-am62l3-evm.dts b/arch/arm/dts/k3-am62l3-evm.dts
index 16efb60bf326018cd483cdeae35ed9538d24d522..4484279e8fcc0361fe73bf42b63a0663b71725b7 100644
--- a/arch/arm/dts/k3-am62l3-evm.dts
+++ b/arch/arm/dts/k3-am62l3-evm.dts
@@ -12,6 +12,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
 
 #include "k3-am62l3.dtsi"
 #include "k3-pinctrl.h"
@@ -105,6 +106,42 @@ eeprom@51 {
 	};
 };
 
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins_default>,
+		    <&rgmii2_pins_default>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio1_pins_default>;
+	status = "okay";
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+
+	cpsw3g_phy1: ethernet-phy@1 {
+		reg = <1>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
 &i2c1 {
 	pinctrl-0 = <&i2c1_pins_default>;
 	pinctrl-names = "default";
@@ -201,6 +238,47 @@ AM62LX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (B4) MMC0_DAT7 */
 		bootph-all;
 	};
 
+	rgmii1_pins_default: rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62LX_IOPAD(0x0138, PIN_INPUT, 0) /* (Y8) RGMII1_RD0 */
+			AM62LX_IOPAD(0x013c, PIN_INPUT, 0) /* (AA6) RGMII1_RD1 */
+			AM62LX_IOPAD(0x0140, PIN_INPUT, 0) /* (AA8) RGMII1_RD2 */
+			AM62LX_IOPAD(0x0144, PIN_INPUT, 0) /* (W8) RGMII1_RD3 */
+			AM62LX_IOPAD(0x0134, PIN_INPUT, 0) /* (Y7) RGMII1_RXC */
+			AM62LX_IOPAD(0x0130, PIN_INPUT, 0) /* (Y6) RGMII1_RX_CTL */
+			AM62LX_IOPAD(0x0120, PIN_OUTPUT, 0) /* (AC10) RGMII1_TD0 */
+			AM62LX_IOPAD(0x0124, PIN_OUTPUT, 0) /* (W13) RGMII1_TD1 */
+			AM62LX_IOPAD(0x0128, PIN_OUTPUT, 0) /* (Y11) RGMII1_TD2 */
+			AM62LX_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AA11) RGMII1_TD3 */
+			AM62LX_IOPAD(0x011c, PIN_OUTPUT, 0) /* (W11) RGMII1_TXC */
+			AM62LX_IOPAD(0x0118, PIN_OUTPUT, 0) /* (AB11) RGMII1_TX_CTL */
+		>;
+	};
+
+	rgmii2_pins_default: rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM62LX_IOPAD(0x0170, PIN_INPUT, 0) /* (AB9) RGMII2_RD0 */
+			AM62LX_IOPAD(0x0174, PIN_INPUT, 0) /* (AC9) RGMII2_RD1 */
+			AM62LX_IOPAD(0x0178, PIN_INPUT, 0) /* (AB10) RGMII2_RD2 */
+			AM62LX_IOPAD(0x017c, PIN_INPUT, 0) /* (AB8) RGMII2_RD3 */
+			AM62LX_IOPAD(0x016c, PIN_INPUT, 0) /* (AC7) RGMII2_RXC */
+			AM62LX_IOPAD(0x0168, PIN_INPUT, 0) /* (AC8) RGMII2_RX_CTL */
+			AM62LX_IOPAD(0x0158, PIN_OUTPUT, 0) /* (AC12) RGMII2_TD0 */
+			AM62LX_IOPAD(0x015c, PIN_OUTPUT, 0) /* (AB13) RGMII2_TD1 */
+			AM62LX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AA12) RGMII2_TD2 */
+			AM62LX_IOPAD(0x0164, PIN_OUTPUT, 0) /* (AA13) RGMII2_TD3 */
+			AM62LX_IOPAD(0x0154, PIN_OUTPUT, 0) /* (Y13) RGMII2_TXC */
+			AM62LX_IOPAD(0x0150, PIN_OUTPUT, 0) /* (AB12) RGMII2_TX_CTL */
+		>;
+	};
+
+	mdio1_pins_default: mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM62LX_IOPAD(0x014c, PIN_OUTPUT, 0) /* (AC15) MDIO0_MDC */
+			AM62LX_IOPAD(0x0148, PIN_INPUT, 0) /* (AC13) MDIO0_MDIO */
+		>;
+	};
+
 	mmc1_pins_default: mmc1-default-pins {
 		pinctrl-single,pins = <
 			AM62LX_IOPAD(0x0230, PIN_INPUT, 0)	 /* (Y3) MMC1_CMD */

-- 
2.39.5