From: Marco Felsch <m.felsch@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 1/5] ARM: i.MX6QDL: add TZASC1/2 defines
Date: Thu, 19 Jun 2025 17:25:52 +0200 [thread overview]
Message-ID: <20250619152556.3749995-1-m.felsch@pengutronix.de> (raw)
On i.MX6 platforms we need to set the bypass mode within the DCD unlike
the i.MX8M platforms which uses the PBL lowlevel code
(imx8m_tzc380_init()).
Add an imxcfg helper to configure the TZASC1/2 to simplify the integration.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
include/mach/imx/imx6q-tzasc.h | 8 ++++++++
1 file changed, 8 insertions(+)
create mode 100644 include/mach/imx/imx6q-tzasc.h
diff --git a/include/mach/imx/imx6q-tzasc.h b/include/mach/imx/imx6q-tzasc.h
new file mode 100644
index 000000000000..968b17d5ec3f
--- /dev/null
+++ b/include/mach/imx/imx6q-tzasc.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Per default all clocks are on, except for TZASC1/2 CG11/2, so enable them
+ * before activate the modules (disable the bypass mode).
+ */
+wm 32 0x020c4070 0xffffffff
+/* Disable TZASC1/2 bypass */
+wm 32 0x020E0024 0x00000003
--
2.39.5
next reply other threads:[~2025-06-19 17:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-19 15:25 Marco Felsch [this message]
2025-06-19 15:25 ` [PATCH 2/5] ARM: i.MX6Q: add imx6_get_mmdc_sdram_size Marco Felsch
2025-06-19 15:25 ` [PATCH 3/5] ARM: mach-imx: tzasc: add region configure helpers Marco Felsch
2025-06-19 15:25 ` [PATCH 4/5] ARM: mach-imx: tzasc: add imx6q_tzc380_early_ns_region1() Marco Felsch
2025-06-19 15:25 ` [PATCH 5/5] ARM: mach-imx: tzasc: add imx6q_tzc380_is_enabled Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250619152556.3749995-1-m.felsch@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox