[PATCH 04/14] ARM: i.MX6QDL: add imxcfg helper to configure the TZASC1/2

[Sascha Hauer <s.hauer@pengutronix.de>]

From: Marco Felsch <m.felsch@pengutronix.de>

On i.MX6 platforms we need to set the bypass mode within the DCD unlike
the i.MX8M platforms which uses the PBL lowlevel code
(imx8m_tzc380_init()).

Add a helper for this to make the integration easier.

Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 include/mach/imx/imx6q-tzasc.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/mach/imx/imx6q-tzasc.h b/include/mach/imx/imx6q-tzasc.h
new file mode 100644
index 0000000000000000000000000000000000000000..968b17d5ec3f74674d3a2049423d71a978e675e9
--- /dev/null
+++ b/include/mach/imx/imx6q-tzasc.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Per default all clocks are on, except for TZASC1/2 CG11/2, so enable them
+ * before activate the modules (disable the bypass mode).
+ */
+wm 32 0x020c4070 0xffffffff
+/* Disable TZASC1/2 bypass */
+wm 32 0x020E0024 0x00000003

-- 
2.39.5