From: Marco Felsch <m.felsch@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: BAREBOX <barebox@lists.infradead.org>
Subject: Re: [PATCH v2 07/15] nvmem: core: allow single and dynamic device ids
Date: Wed, 20 Aug 2025 11:13:59 +0200 [thread overview]
Message-ID: <20250820091359.owx4wec4xc22ihgj@pengutronix.de> (raw)
In-Reply-To: <aKV9l1nfPtnY5j5I@pengutronix.de>
On 25-08-20, Sascha Hauer wrote:
> On Mon, Aug 18, 2025 at 07:44:41PM +0200, Marco Felsch wrote:
> > At the moment only DEVICE_ID_DYNAMIC is supported. Add support for
> > NVMEM_DEVID_NONE to allow static device names via of-aliases and to
> > align our core with Linux.
> >
> > While on it fix the nvmem_register_cdev() by using the dev_name() which
> > honors the DEVICE_ID_* cases else we end up with different names for the
> > devfs and the device itself.
> >
> > The dev_dbg() message can be dropped as well since the register_device()
> > can print this message too.
> >
> > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> > ---
> > drivers/nvmem/core.c | 16 +++++++++++-----
> > include/linux/nvmem-provider.h | 4 ++++
> > 2 files changed, 15 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
> > index 4dbeb1e116ae398f1f2748238d97468c1096262a..7e1dcceb00b924548b4582504b8ccaa4f29c4bdc 100644
> > --- a/drivers/nvmem/core.c
> > +++ b/drivers/nvmem/core.c
> > @@ -442,17 +442,23 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
> > if (config->read_only || !config->reg_write || of_property_read_bool(np, "read-only"))
> > nvmem->read_only = true;
> >
> > - dev_set_name(&nvmem->dev, "%s", config->name);
> > - nvmem->dev.id = DEVICE_ID_DYNAMIC;
> > -
> > - dev_dbg(nvmem->dev.parent, "Registering nvmem device %s\n", config->name);
> > + dev_set_name(&nvmem->dev, "%s", config->name ? : "nvmem");
> > + switch (config->id) {
> > + case NVMEM_DEVID_NONE:
> > + nvmem->dev.id = DEVICE_ID_SINGLE;
> > + break;
> > + case NVMEM_DEVID_AUTO:
> > + default:
> > + nvmem->dev.id = DEVICE_ID_DYNAMIC;
> > + break;
> > + }
> >
> > rval = register_device(&nvmem->dev);
> > if (rval)
> > goto err_remove_cells;
> >
> > if (!config->cdev) {
> > - rval = nvmem_register_cdev(nvmem, config->name);
> > + rval = nvmem_register_cdev(nvmem, dev_name(&nvmem->dev));
>
> This change breaks the "nvmem" command and with it the nvmem test.
> "nvmem -c 1k" used to create a /dev/rmem0 cdev. With this change it
> now creates a "/dev/rmem00" cdev.
I wasn't aware of this command till now.
> I Fixed this with the following.
Thank you!
Regards,
Marco
>
> ---------------------------------8<-----------------------------------
> From 171ed3f457ff8ba336f0300939c3ec39a4cda5eb Mon Sep 17 00:00:00 2001
> From: Sascha Hauer <s.hauer@pengutronix.de>
> Date: Wed, 20 Aug 2025 09:28:19 +0200
> Subject: [PATCH] fixup! nvmem: core: allow single and dynamic device ids
>
> Rename "rmem" driver to "nvmem-rmem". Without it both the rmem container
> device and the nvmem device are named "rmem" with different ids.
>
> ---
> commands/nvmem.c | 2 +-
> drivers/nvmem/rmem.c | 5 +++--
> 2 files changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/commands/nvmem.c b/commands/nvmem.c
> index 3bfa1ff19a..25f80db6fd 100644
> --- a/commands/nvmem.c
> +++ b/commands/nvmem.c
> @@ -35,7 +35,7 @@ static int nvmem_create_dynamic_rmem(unsigned long create_size,
> int ret = 0;
>
> buffer = xzalloc(create_size);
> - dev = add_generic_device("rmem", dynamic_rmem_idx, NULL,
> + dev = add_generic_device("nvmem-rmem", dynamic_rmem_idx, NULL,
> (resource_size_t)(uintptr_t)buffer,
> (resource_size_t)create_size,
> IORESOURCE_MEM, NULL);
> diff --git a/drivers/nvmem/rmem.c b/drivers/nvmem/rmem.c
> index 378a93110d..de9b7af6e4 100644
> --- a/drivers/nvmem/rmem.c
> +++ b/drivers/nvmem/rmem.c
> @@ -118,7 +118,8 @@ static int rmem_probe(struct device *dev)
>
> config.dev = priv->dev = dev;
> config.priv = priv;
> - config.name = dev_name(dev);
> + config.name = "rmem";
> + config.id = NVMEM_DEVID_AUTO;
> config.size = resource_size(mem);
> priv->size = config.size;
>
> @@ -138,7 +139,7 @@ static const struct of_device_id rmem_match[] = {
> MODULE_DEVICE_TABLE(of, rmem_match);
>
> static struct driver rmem_driver = {
> - .name = "rmem",
> + .name = "nvmem-rmem",
> .of_compatible = rmem_match,
> .probe = rmem_probe,
> };
> --
> 2.39.5
>
>
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
next prev parent reply other threads:[~2025-08-20 11:04 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-18 17:44 [PATCH v2 00/15] NVMEM: Add support for layout drivers Marco Felsch
2025-08-18 17:44 ` [PATCH v2 01/15] of: sync of_*_phandle_with_args with Linux Marco Felsch
2025-08-18 17:44 ` [PATCH v2 02/15] of: base: add of_parse_phandle_with_optional_args() Marco Felsch
2025-08-18 17:44 ` [PATCH v2 03/15] of: device: Export of_device_make_bus_id() Marco Felsch
2025-08-18 17:44 ` [PATCH v2 04/15] nvmem: core: fix nvmem_register error path Marco Felsch
2025-08-18 17:44 ` [PATCH v2 05/15] nvmem: core: sync with Linux Marco Felsch
2025-08-20 7:32 ` Sascha Hauer
2025-08-20 9:09 ` Marco Felsch
2025-08-18 17:44 ` [PATCH v2 06/15] nvmem: core: expose nvmem cells as cdev Marco Felsch
2025-08-20 7:33 ` Sascha Hauer
2025-08-20 9:09 ` Marco Felsch
2025-08-18 17:44 ` [PATCH v2 07/15] nvmem: core: allow single and dynamic device ids Marco Felsch
2025-08-20 7:47 ` Sascha Hauer
2025-08-20 9:13 ` Marco Felsch [this message]
2025-08-18 17:44 ` [PATCH v2 08/15] eeprom: at24: fix device name handling Marco Felsch
2025-08-18 17:44 ` [PATCH v2 09/15] nvmem: core: create a header for internal sharing Marco Felsch
2025-08-18 17:44 ` [PATCH v2 10/15] nvmem: core: add nvmem-layout support Marco Felsch
2025-08-19 12:46 ` Sascha Hauer
2025-08-19 14:39 ` Marco Felsch
2025-08-20 7:41 ` Sascha Hauer
2025-08-20 9:11 ` Marco Felsch
2025-08-20 9:40 ` Sascha Hauer
2025-08-20 9:55 ` Marco Felsch
2025-08-18 17:44 ` [PATCH v2 11/15] nvmem: core: add an index parameter to the cell Marco Felsch
2025-08-18 17:44 ` [PATCH v2 12/15] nvmem: core: add per-cell post processing Marco Felsch
2025-08-18 17:44 ` [PATCH v2 13/15] nvmem: core: add cell based fixup logic Marco Felsch
2025-08-18 17:44 ` [PATCH v2 14/15] nvmem: core: provide own priv pointer in post process callback Marco Felsch
2025-08-18 17:44 ` [PATCH v2 15/15] nvmem: core: drop global cell_post_process Marco Felsch
2025-08-19 7:23 ` [PATCH v2 00/15] NVMEM: Add support for layout drivers Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250820091359.owx4wec4xc22ihgj@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox