[PATCH master] Documentation: boards: k3: fix wrong indentation in ReST

[PATCH master] Documentation: boards: k3: fix wrong indentation in ReST

[Ahmad Fatoum]

Building the docs warns about the lack of indentation.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 Documentation/boards/ti-k3-am62lx.rst | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/Documentation/boards/ti-k3-am62lx.rst b/Documentation/boards/ti-k3-am62lx.rst
index 1ca5f3403bac..f0a547016664 100644
--- a/Documentation/boards/ti-k3-am62lx.rst
+++ b/Documentation/boards/ti-k3-am62lx.rst
@@ -12,12 +12,13 @@ power domains and DRAM. When this is done the BL1 branches back to the ROM which
 the second stage which contains the TF-A BL31, barebox proper and optionally OP-TEE.
 
 .. note::
-The AM62lx support currently depends on a modified downstream version of the TF-A. See
-https://lore.kernel.org/20250617090142.3000882-1-s.hauer@pengutronix.de for a patch
-series to be applied on the Downstream TF-A. Be aware that barebox might need further
-changes to be compatible with future upstream TF-A support. Specifically the SCMI clock
-IDs used in the assigned-clock-parents properties might not match the future upstream
-solution.
+
+  The AM62lx support currently depends on a modified downstream version of the TF-A. See
+  https://lore.kernel.org/20250617090142.3000882-1-s.hauer@pengutronix.de for a patch
+  series to be applied on the Downstream TF-A. Be aware that barebox might need further
+  changes to be compatible with future upstream TF-A support. Specifically the SCMI clock
+  IDs used in the assigned-clock-parents properties might not match the future upstream
+  solution.
 
 Building TF-A
 -------------
-- 
2.47.3