[PATCH 0/5] usb: dwc3: add fsl,ls1028a-dwc3 glue driver

[Ahmad Fatoum <a.fatoum@pengutronix.de>]

Linux seems to move towards not having glue device tree nodes separate
from the DWC3 nodes. Import the Linux generic driver for use with
Layerscape and other platforms that may be migrated in future.

This meant for next and applies on top of the temporary workaround in
master at
https://lore.barebox.org/barebox/20260105151921.224540-1-a.fatoum@pengutronix.de/T/#u

Ahmad Fatoum (5):
  usb: dwc3: export dwc3_core_probe/dwc3_core_remove like Linux
  usb: dwc3: add support for Global SoC Bus Configuration Register
  clk: implement and use clk_bulk_get_all_enabled helper
  usb: dwc3: add DesignWare USB3 generic platform driver
  Revert "ARM64: dts: Layerscape: workaround v6.19-rc1 DT sync DWC3
    breakage"

 arch/arm/dts/fsl-ls1028a.dtsi        |   9 --
 arch/arm/dts/fsl-ls1046a.dtsi        |  13 ---
 drivers/bus/simple-pm-bus.c          |   6 +-
 drivers/clk/clk-bulk.c               |  19 ++++
 drivers/usb/dwc3/Kconfig             |  11 +++
 drivers/usb/dwc3/Makefile            |   1 +
 drivers/usb/dwc3/core.c              | 113 ++++++++++++++++++------
 drivers/usb/dwc3/core.h              |   8 ++
 drivers/usb/dwc3/dwc3-generic-plat.c | 125 +++++++++++++++++++++++++++
 drivers/usb/dwc3/glue.h              |  63 ++++++++++++++
 drivers/usb/host/ehci-hcd.c          |   5 +-
 include/linux/clk.h                  |  16 ++++
 12 files changed, 332 insertions(+), 57 deletions(-)
 create mode 100644 drivers/usb/dwc3/dwc3-generic-plat.c
 create mode 100644 drivers/usb/dwc3/glue.h

-- 
2.47.3