From: Marco Felsch <m.felsch@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>,
BAREBOX <barebox@lists.infradead.org>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Subject: [PATCH v2 14/15] of: base: register optional OP-TEE overlay
Date: Wed, 04 Feb 2026 21:01:30 +0100 [thread overview]
Message-ID: <20260204-v2025-09-0-topic-optee-of-handling-v2-14-da075e6818e0@pengutronix.de> (raw)
In-Reply-To: <20260204-v2025-09-0-topic-optee-of-handling-v2-0-da075e6818e0@pengutronix.de>
The BL32 OP-TEE binary can provide an overlay which contains all
required configurations made by the secure-os, e.g. reserved-memory
nodes, the firmware-interface (smc) and so on.
This overlay can be used to uniform the OP-TEE configuration handling
for all OF platforms. While this patch is platform agnostic, the OP-TEE
overlay handling still depends on platform and machine specific
integrations.
The previous patches added the required platform support for all
i.MX8MM/N/P SoCs, but each i.MX8MM/N/P machine need add the machine
support by itself.
Allthough only i.MX8MM/N/P platform support was added, this commit
prepare all ARMv8 platforms for the new overlay mechanism.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
arch/arm/mach-imx/imx9.c | 2 +-
arch/arm/mach-rockchip/rockchip.c | 3 ++-
drivers/of/base.c | 3 +++
drivers/soc/imx/soc-imx8m.c | 3 ++-
4 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-imx/imx9.c b/arch/arm/mach-imx/imx9.c
index 25ba7e444843ea5ae817dd8103074e5a50fb48f0..ada4048d4ca07b5a2f8a5ee5ceb3e3b3ecb24af8 100644
--- a/arch/arm/mach-imx/imx9.c
+++ b/arch/arm/mach-imx/imx9.c
@@ -174,7 +174,7 @@ int imx93_init(void)
imx93_set_arm_clock();
imx93_bootsource();
- if (IS_ENABLED(CONFIG_PBL_OPTEE)) {
+ if (IS_ENABLED(CONFIG_PBL_OPTEE) && !optee_overlay_registered()) {
static struct of_optee_fixup_data optee_fixup_data = {
.shm_size = OPTEE_SHM_SIZE,
.method = "smc",
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 0828f0fa72a9ad2495e012a42918c4b5431652e7..6ed7802cc695a61253c937b24f5b1c2a1eea7732 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -33,7 +33,8 @@ static int rockchip_init(void)
{
const struct optee_header *hdr = rk_scratch_get_optee_hdr();
- if (IS_ENABLED(CONFIG_PBL_OPTEE) && optee_verify_header(hdr) == 0) {
+ if (IS_ENABLED(CONFIG_PBL_OPTEE) && !optee_overlay_registered() &&
+ optee_verify_header(hdr) == 0) {
static struct of_optee_fixup_data optee_fixup_data = {
.shm_size = OPTEE_SHM_SIZE,
.method = "smc",
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 54fd458bd9a1e38e665768d911934960358b42a9..3110f377212b272ae09bb15b20803b718c734f32 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -23,6 +23,7 @@
#include <linux/ctype.h>
#include <linux/err.h>
#include <pm_domain.h>
+#include <tee/optee.h>
static struct device_node *root_node;
@@ -2133,6 +2134,8 @@ int barebox_register_fdt(const void *dtb)
return PTR_ERR(root);
}
+ optee_register_overlay();
+
return barebox_register_of(root);
}
diff --git a/drivers/soc/imx/soc-imx8m.c b/drivers/soc/imx/soc-imx8m.c
index 3b83284fcbfd56d543cc300b8d42771202aa0bbb..695fc3b027ae81cc8c83cbf27aff261c0459aa8a 100644
--- a/drivers/soc/imx/soc-imx8m.c
+++ b/drivers/soc/imx/soc-imx8m.c
@@ -207,7 +207,8 @@ static int imx8_soc_imx8m_init(struct soc_device_attribute *soc_dev_attr)
imx_set_reset_reason(src + IMX7_SRC_SRSR, imx7_reset_reasons);
pr_info("%s unique ID: %s\n", cputypestr, uid);
- if (IS_ENABLED(CONFIG_PBL_OPTEE) && imx8m_tzc380_is_enabled()) {
+ if (IS_ENABLED(CONFIG_PBL_OPTEE) && imx8m_tzc380_is_enabled() &&
+ !optee_overlay_registered()) {
static struct of_optee_fixup_data optee_fixup_data = {
.shm_size = OPTEE_SHM_SIZE,
.method = "smc",
--
2.47.3
next prev parent reply other threads:[~2026-02-04 20:02 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-04 20:01 [PATCH v2 00/15] Improve OP-TEE handling Marco Felsch
2026-02-04 20:01 ` [PATCH v2 01/15] ARM: i.MX8M: add support to pass DT via lowlevel __imx8m*_load_and_start_image_via_tfa() Marco Felsch
2026-02-06 9:04 ` Ahmad Fatoum
2026-02-04 20:01 ` [PATCH v2 02/15] ARM: i.MX8M: move BL32 setup into imx8m_tfa_start_bl31() Marco Felsch
2026-02-04 20:01 ` [PATCH v2 03/15] ARM: i.MX8M: imx8m_tfa_start_bl31() add support for bl33 and fdt Marco Felsch
2026-02-04 20:01 ` [PATCH v2 04/15] pbl: decomp: add pbl_dtbz_uncompress helper Marco Felsch
2026-02-04 20:01 ` [PATCH v2 05/15] pbl: fdt: add pbl_load_fdt helper Marco Felsch
2026-02-06 9:16 ` Ahmad Fatoum
2026-02-04 20:01 ` [PATCH v2 06/15] ARM: i.MX: scratch: add FDT support Marco Felsch
2026-02-06 9:40 ` Ahmad Fatoum
2026-02-06 10:02 ` Marco Felsch
2026-02-06 13:01 ` Ahmad Fatoum
2026-02-09 20:50 ` Marco Felsch
2026-02-09 20:59 ` Ahmad Fatoum
2026-02-10 9:35 ` Marco Felsch
2026-02-10 9:41 ` Ahmad Fatoum
2026-02-04 20:01 ` [PATCH v2 07/15] ARM: i.MX8M: esdctl: drop ddrc base from imx8m_ddrc_sdram_size Marco Felsch
2026-02-04 20:01 ` [PATCH v2 08/15] ARM: i.MX8M: esdctl: export imx8m_ddrc_sdram_size() Marco Felsch
2026-02-04 20:01 ` [PATCH v2 09/15] ARM: i.MX8M: add support to pass BL3x bl_params Marco Felsch
2026-02-05 17:02 ` Michael Tretter
2026-02-05 22:41 ` Marco Felsch
2026-02-06 10:20 ` Ahmad Fatoum
2026-02-06 13:46 ` Marco Felsch
2026-02-06 11:55 ` Ahmad Fatoum
2026-02-04 20:01 ` [PATCH v2 10/15] handoff-data: Add TEE_DT_OVL entry Marco Felsch
2026-02-06 11:56 ` Ahmad Fatoum
2026-02-04 20:01 ` [PATCH v2 11/15] security: optee: add optee_handoff_overlay helper Marco Felsch
2026-02-06 12:25 ` Ahmad Fatoum
2026-02-09 20:18 ` Marco Felsch
2026-02-04 20:01 ` [PATCH v2 12/15] security: optee: add helpers to register OF overlays Marco Felsch
2026-02-06 12:09 ` Ahmad Fatoum
2026-02-09 20:17 ` Marco Felsch
2026-02-04 20:01 ` [PATCH v2 13/15] ARM: i.MX8M: Pass optional OP-TEE overlay to barebox Marco Felsch
2026-02-06 12:04 ` Ahmad Fatoum
2026-02-04 20:01 ` Marco Felsch [this message]
2026-02-06 12:05 ` [PATCH v2 14/15] of: base: register optional OP-TEE overlay Ahmad Fatoum
2026-02-06 13:24 ` Marco Felsch
2026-02-04 20:01 ` [PATCH v2 15/15] handoff-data: add missing include Marco Felsch
2026-02-06 12:07 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260204-v2025-09-0-topic-optee-of-handling-v2-14-da075e6818e0@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox