mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Marco Felsch <m.felsch@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: BAREBOX <barebox@lists.infradead.org>
Subject: Re: [PATCH v2 14/15] of: base: register optional OP-TEE overlay
Date: Fri, 6 Feb 2026 14:24:55 +0100	[thread overview]
Message-ID: <20260206132455.vwy5ddcfb5exy4re@pengutronix.de> (raw)
In-Reply-To: <388370f2-c08a-4394-988f-d4686db50884@pengutronix.de>

On 26-02-06, Ahmad Fatoum wrote:
> On 2/4/26 9:01 PM, Marco Felsch wrote:
> > The BL32 OP-TEE binary can provide an overlay which contains all
> > required configurations made by the secure-os, e.g. reserved-memory
> > nodes, the firmware-interface (smc) and so on.
> > 
> > This overlay can be used to uniform the OP-TEE configuration handling
> > for all OF platforms. While this patch is platform agnostic, the OP-TEE
> > overlay handling still depends on platform and machine specific
> > integrations.
> > 
> > The previous patches added the required platform support for all
> > i.MX8MM/N/P SoCs, but each i.MX8MM/N/P machine need add the machine
> > support by itself.
> > 
> > Allthough only i.MX8MM/N/P platform support was added, this commit
> > prepare all ARMv8 platforms for the new overlay mechanism.
> 
> Why is this ARMv8-specific? Seems to me it applies to all architectures
> now even? (provided they have OPTEE support)

You're right the optee_register_overlay() applies to all OF
architectures.

I wanted to point out that optee_overlay_registered() is added to all
current ARMv8 platforms albeit it makes only sense for i.MX8MM/N/P
platforms at the moment, because these platforms actually do support
passing the HANDOFF_DATA_TEE_DT_OVL data.

I can drop this paragraph if you want to not confuse the reader.

Regards,
  Marco

> > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> 
> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> 
> > ---
> >  arch/arm/mach-imx/imx9.c          | 2 +-
> >  arch/arm/mach-rockchip/rockchip.c | 3 ++-
> >  drivers/of/base.c                 | 3 +++
> >  drivers/soc/imx/soc-imx8m.c       | 3 ++-
> >  4 files changed, 8 insertions(+), 3 deletions(-)
> > 
> > diff --git a/arch/arm/mach-imx/imx9.c b/arch/arm/mach-imx/imx9.c
> > index 25ba7e444843ea5ae817dd8103074e5a50fb48f0..ada4048d4ca07b5a2f8a5ee5ceb3e3b3ecb24af8 100644
> > --- a/arch/arm/mach-imx/imx9.c
> > +++ b/arch/arm/mach-imx/imx9.c
> > @@ -174,7 +174,7 @@ int imx93_init(void)
> >  	imx93_set_arm_clock();
> >  	imx93_bootsource();
> >  
> > -	if (IS_ENABLED(CONFIG_PBL_OPTEE)) {
> > +	if (IS_ENABLED(CONFIG_PBL_OPTEE) && !optee_overlay_registered()) {
> >  		static struct of_optee_fixup_data optee_fixup_data = {
> >  			.shm_size = OPTEE_SHM_SIZE,
> >  			.method = "smc",
> > diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
> > index 0828f0fa72a9ad2495e012a42918c4b5431652e7..6ed7802cc695a61253c937b24f5b1c2a1eea7732 100644
> > --- a/arch/arm/mach-rockchip/rockchip.c
> > +++ b/arch/arm/mach-rockchip/rockchip.c
> > @@ -33,7 +33,8 @@ static int rockchip_init(void)
> >  {
> >  	const struct optee_header *hdr = rk_scratch_get_optee_hdr();
> >  
> > -	if (IS_ENABLED(CONFIG_PBL_OPTEE) && optee_verify_header(hdr) == 0) {
> > +	if (IS_ENABLED(CONFIG_PBL_OPTEE) && !optee_overlay_registered() &&
> > +	    optee_verify_header(hdr) == 0) {
> >  		static struct of_optee_fixup_data optee_fixup_data = {
> >  			.shm_size = OPTEE_SHM_SIZE,
> >  			.method = "smc",
> > diff --git a/drivers/of/base.c b/drivers/of/base.c
> > index 54fd458bd9a1e38e665768d911934960358b42a9..3110f377212b272ae09bb15b20803b718c734f32 100644
> > --- a/drivers/of/base.c
> > +++ b/drivers/of/base.c
> > @@ -23,6 +23,7 @@
> >  #include <linux/ctype.h>
> >  #include <linux/err.h>
> >  #include <pm_domain.h>
> > +#include <tee/optee.h>
> >  
> >  static struct device_node *root_node;
> >  
> > @@ -2133,6 +2134,8 @@ int barebox_register_fdt(const void *dtb)
> >  		return PTR_ERR(root);
> >  	}
> >  
> > +	optee_register_overlay();
> > +
> >  	return barebox_register_of(root);
> >  }
> >  
> > diff --git a/drivers/soc/imx/soc-imx8m.c b/drivers/soc/imx/soc-imx8m.c
> > index 3b83284fcbfd56d543cc300b8d42771202aa0bbb..695fc3b027ae81cc8c83cbf27aff261c0459aa8a 100644
> > --- a/drivers/soc/imx/soc-imx8m.c
> > +++ b/drivers/soc/imx/soc-imx8m.c
> > @@ -207,7 +207,8 @@ static int imx8_soc_imx8m_init(struct soc_device_attribute *soc_dev_attr)
> >  	imx_set_reset_reason(src + IMX7_SRC_SRSR, imx7_reset_reasons);
> >  	pr_info("%s unique ID: %s\n", cputypestr, uid);
> >  
> > -	if (IS_ENABLED(CONFIG_PBL_OPTEE) && imx8m_tzc380_is_enabled()) {
> > +	if (IS_ENABLED(CONFIG_PBL_OPTEE) && imx8m_tzc380_is_enabled() &&
> > +	    !optee_overlay_registered()) {
> >  		static struct of_optee_fixup_data optee_fixup_data = {
> >  			.shm_size = OPTEE_SHM_SIZE,
> >  			.method = "smc",
> > 
> 
> -- 
> Pengutronix e.K.                  |                             |
> Steuerwalder Str. 21              | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany         | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |
> 
> 

-- 
#gernperDu 
#CallMeByMyFirstName

Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-9    |



  reply	other threads:[~2026-02-06 13:25 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-04 20:01 [PATCH v2 00/15] Improve OP-TEE handling Marco Felsch
2026-02-04 20:01 ` [PATCH v2 01/15] ARM: i.MX8M: add support to pass DT via lowlevel __imx8m*_load_and_start_image_via_tfa() Marco Felsch
2026-02-06  9:04   ` Ahmad Fatoum
2026-02-04 20:01 ` [PATCH v2 02/15] ARM: i.MX8M: move BL32 setup into imx8m_tfa_start_bl31() Marco Felsch
2026-02-04 20:01 ` [PATCH v2 03/15] ARM: i.MX8M: imx8m_tfa_start_bl31() add support for bl33 and fdt Marco Felsch
2026-02-04 20:01 ` [PATCH v2 04/15] pbl: decomp: add pbl_dtbz_uncompress helper Marco Felsch
2026-02-04 20:01 ` [PATCH v2 05/15] pbl: fdt: add pbl_load_fdt helper Marco Felsch
2026-02-06  9:16   ` Ahmad Fatoum
2026-02-04 20:01 ` [PATCH v2 06/15] ARM: i.MX: scratch: add FDT support Marco Felsch
2026-02-06  9:40   ` Ahmad Fatoum
2026-02-06 10:02     ` Marco Felsch
2026-02-06 13:01       ` Ahmad Fatoum
2026-02-09 20:50         ` Marco Felsch
2026-02-09 20:59           ` Ahmad Fatoum
2026-02-10  9:35             ` Marco Felsch
2026-02-10  9:41               ` Ahmad Fatoum
2026-02-04 20:01 ` [PATCH v2 07/15] ARM: i.MX8M: esdctl: drop ddrc base from imx8m_ddrc_sdram_size Marco Felsch
2026-02-04 20:01 ` [PATCH v2 08/15] ARM: i.MX8M: esdctl: export imx8m_ddrc_sdram_size() Marco Felsch
2026-02-04 20:01 ` [PATCH v2 09/15] ARM: i.MX8M: add support to pass BL3x bl_params Marco Felsch
2026-02-05 17:02   ` Michael Tretter
2026-02-05 22:41     ` Marco Felsch
2026-02-06 10:20       ` Ahmad Fatoum
2026-02-06 13:46         ` Marco Felsch
2026-02-06 11:55   ` Ahmad Fatoum
2026-02-04 20:01 ` [PATCH v2 10/15] handoff-data: Add TEE_DT_OVL entry Marco Felsch
2026-02-06 11:56   ` Ahmad Fatoum
2026-02-04 20:01 ` [PATCH v2 11/15] security: optee: add optee_handoff_overlay helper Marco Felsch
2026-02-06 12:25   ` Ahmad Fatoum
2026-02-09 20:18     ` Marco Felsch
2026-02-04 20:01 ` [PATCH v2 12/15] security: optee: add helpers to register OF overlays Marco Felsch
2026-02-06 12:09   ` Ahmad Fatoum
2026-02-09 20:17     ` Marco Felsch
2026-02-04 20:01 ` [PATCH v2 13/15] ARM: i.MX8M: Pass optional OP-TEE overlay to barebox Marco Felsch
2026-02-06 12:04   ` Ahmad Fatoum
2026-02-04 20:01 ` [PATCH v2 14/15] of: base: register optional OP-TEE overlay Marco Felsch
2026-02-06 12:05   ` Ahmad Fatoum
2026-02-06 13:24     ` Marco Felsch [this message]
2026-02-04 20:01 ` [PATCH v2 15/15] handoff-data: add missing include Marco Felsch
2026-02-06 12:07   ` Ahmad Fatoum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260206132455.vwy5ddcfb5exy4re@pengutronix.de \
    --to=m.felsch@pengutronix.de \
    --cc=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox