mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Marco Felsch <m.felsch@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>,
	 BAREBOX <barebox@lists.infradead.org>
Cc: Marco Felsch <m.felsch@pengutronix.de>,
	 Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH v3 14/14] of: base: register optional OP-TEE overlay
Date: Wed, 11 Feb 2026 23:41:25 +0100	[thread overview]
Message-ID: <20260211-v2025-09-0-topic-optee-of-handling-v3-14-dd83358ae624@pengutronix.de> (raw)
In-Reply-To: <20260211-v2025-09-0-topic-optee-of-handling-v3-0-dd83358ae624@pengutronix.de>

The BL32 OP-TEE binary can provide an overlay which contains all
required configurations made by the secure-os, e.g. reserved-memory
nodes, the firmware-interface (smc) and so on.

This overlay can be used to uniform the OP-TEE configuration handling
for all OF platforms. While this patch is platform agnostic, the OP-TEE
overlay handling still depends on platform and machine specific
integrations.

Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
 arch/arm/mach-imx/imx9.c          | 2 +-
 arch/arm/mach-rockchip/rockchip.c | 3 ++-
 drivers/of/base.c                 | 3 +++
 drivers/soc/imx/soc-imx8m.c       | 3 ++-
 4 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-imx/imx9.c b/arch/arm/mach-imx/imx9.c
index 25ba7e444843ea5ae817dd8103074e5a50fb48f0..ada4048d4ca07b5a2f8a5ee5ceb3e3b3ecb24af8 100644
--- a/arch/arm/mach-imx/imx9.c
+++ b/arch/arm/mach-imx/imx9.c
@@ -174,7 +174,7 @@ int imx93_init(void)
 	imx93_set_arm_clock();
 	imx93_bootsource();
 
-	if (IS_ENABLED(CONFIG_PBL_OPTEE)) {
+	if (IS_ENABLED(CONFIG_PBL_OPTEE) && !optee_overlay_registered()) {
 		static struct of_optee_fixup_data optee_fixup_data = {
 			.shm_size = OPTEE_SHM_SIZE,
 			.method = "smc",
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 0828f0fa72a9ad2495e012a42918c4b5431652e7..6ed7802cc695a61253c937b24f5b1c2a1eea7732 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -33,7 +33,8 @@ static int rockchip_init(void)
 {
 	const struct optee_header *hdr = rk_scratch_get_optee_hdr();
 
-	if (IS_ENABLED(CONFIG_PBL_OPTEE) && optee_verify_header(hdr) == 0) {
+	if (IS_ENABLED(CONFIG_PBL_OPTEE) && !optee_overlay_registered() &&
+	    optee_verify_header(hdr) == 0) {
 		static struct of_optee_fixup_data optee_fixup_data = {
 			.shm_size = OPTEE_SHM_SIZE,
 			.method = "smc",
diff --git a/drivers/of/base.c b/drivers/of/base.c
index a26c1faa41d5a7acea4f71126ff553cf7b0bae86..1c81383d84cb66e900eb2b33d3be03239abd056a 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -23,6 +23,7 @@
 #include <linux/ctype.h>
 #include <linux/err.h>
 #include <pm_domain.h>
+#include <tee/optee.h>
 
 static struct device_node *root_node;
 
@@ -2132,6 +2133,8 @@ int barebox_register_fdt(const void *dtb)
 		return PTR_ERR(root);
 	}
 
+	optee_register_overlay();
+
 	return barebox_register_of(root);
 }
 
diff --git a/drivers/soc/imx/soc-imx8m.c b/drivers/soc/imx/soc-imx8m.c
index 3b83284fcbfd56d543cc300b8d42771202aa0bbb..695fc3b027ae81cc8c83cbf27aff261c0459aa8a 100644
--- a/drivers/soc/imx/soc-imx8m.c
+++ b/drivers/soc/imx/soc-imx8m.c
@@ -207,7 +207,8 @@ static int imx8_soc_imx8m_init(struct soc_device_attribute *soc_dev_attr)
 	imx_set_reset_reason(src + IMX7_SRC_SRSR, imx7_reset_reasons);
 	pr_info("%s unique ID: %s\n", cputypestr, uid);
 
-	if (IS_ENABLED(CONFIG_PBL_OPTEE) && imx8m_tzc380_is_enabled()) {
+	if (IS_ENABLED(CONFIG_PBL_OPTEE) && imx8m_tzc380_is_enabled() &&
+	    !optee_overlay_registered()) {
 		static struct of_optee_fixup_data optee_fixup_data = {
 			.shm_size = OPTEE_SHM_SIZE,
 			.method = "smc",

-- 
2.47.3




      parent reply	other threads:[~2026-02-11 22:42 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-11 22:41 [PATCH v3 00/14] Improve OP-TEE handling Marco Felsch
2026-02-11 22:41 ` [PATCH v3 01/14] ARM: i.MX8M: add support to pass DT via lowlevel __imx8m*_load_and_start_image_via_tfa() Marco Felsch
2026-02-11 22:41 ` [PATCH v3 02/14] ARM: i.MX8M: move BL32 setup into imx8m_tfa_start_bl31() Marco Felsch
2026-02-11 22:41 ` [PATCH v3 03/14] ARM: i.MX8M: imx8m_tfa_start_bl31() add support for bl33 and fdt Marco Felsch
2026-02-11 22:41 ` [PATCH v3 04/14] pbl: decomp: add pbl_dtbz_uncompress helper Marco Felsch
2026-02-11 22:41 ` [PATCH v3 05/14] pbl: fdt: add pbl_load_fdt helper Marco Felsch
2026-02-11 22:41 ` [PATCH v3 06/14] ARM: i.MX: scratch: add FDT support Marco Felsch
2026-02-12  9:11   ` Ahmad Fatoum
2026-02-11 22:41 ` [PATCH v3 07/14] ARM: i.MX8M: esdctl: drop ddrc base from imx8m_ddrc_sdram_size Marco Felsch
2026-02-11 22:41 ` [PATCH v3 08/14] ARM: i.MX8M: esdctl: export imx8m_ddrc_sdram_size() Marco Felsch
2026-02-11 22:41 ` [PATCH v3 09/14] ARM: i.MX8M: add support to pass BL3x bl_params Marco Felsch
2026-02-11 22:41 ` [PATCH v3 10/14] handoff-data: Add TEE_DT_OVL entry Marco Felsch
2026-02-11 22:41 ` [PATCH v3 11/14] security: optee: add optee_handoff_overlay helper Marco Felsch
2026-02-11 22:41 ` [PATCH v3 12/14] security: optee: add helpers to register OF overlays Marco Felsch
2026-02-11 22:41 ` [PATCH v3 13/14] ARM: i.MX8M: Pass optional OP-TEE overlay to barebox Marco Felsch
2026-02-11 22:41 ` Marco Felsch [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260211-v2025-09-0-topic-optee-of-handling-v3-14-dd83358ae624@pengutronix.de \
    --to=m.felsch@pengutronix.de \
    --cc=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox