[PATCH v1 3/4] dt-bindings: display: panel: add Ilitek ILI9488 panel

[Giandomenico Rossi <rossi@amelchem.com>]

Add device tree binding documentation for TFT LCD panels based on
the Ilitek ILI9488 controller connected via MIPI DBI Type-C Option 1
over SPI.

The binding documents panels such as the WF35-320480UD operating in
RGB666 (18-bit) pixel format and describes required GPIOs, power
supply, optional backlight and panel timing.

A 'rotation' property is provided to configure the display
orientation.

Signed-off-by: Giandomenico Rossi <rossi@amelchem.com>
---
 .../display/panel/panel-ilitek-ili9488.yaml   | 120 ++++++++++++++++++
 1 file changed, 120 insertions(+)
 create mode 100644 dts/Bindings/display/panel/panel-ilitek-ili9488.yaml

diff --git a/dts/Bindings/display/panel/panel-ilitek-ili9488.yaml b/dts/Bindings/display/panel/panel-ilitek-ili9488.yaml
new file mode 100644
index 0000000000..ceb14a5c25
--- /dev/null
+++ b/dts/Bindings/display/panel/panel-ilitek-ili9488.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/video/panel-ilitek-ili9488.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Ilitek ILI9488 TFT LCD Panel (MIPI DBI SPI)
+
+maintainers:
+  - Giandomenico Rossi <rossi@amelchem.com>
+
+description: |
+  Ilitek ILI9488 TFT LCD controller connected over MIPI DBI Type C
+  Option 1 using an SPI bus.
+
+  Specific panels such as the Winstar WF35-320480UD may provide a
+  vendor-specific compatible string followed by "ilitek,ili9488"
+  as fallback.
+
+  The controller supports RGB666 (18-bit) pixel format over SPI.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: winstar,wf35-320480ud
+          - const: ilitek,ili9488
+      - const: ilitek,ili9488
+
+  reg:
+    description: SPI chip select number
+    maxItems: 1
+
+  spi-max-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 48000000
+    description: Maximum SPI clock frequency in Hz
+
+  reset-gpios:
+    description: Optional hardware reset GPIO
+    maxItems: 1
+
+  power-supply:
+    description: Regulator supplying panel power
+
+  backlight:
+    description: Phandle to a backlight device
+
+  rotation:
+    description: |
+      Display rotation in degrees clockwise.
+
+      The driver uses this value to configure the ILI9488
+      Memory Access Control (MADCTL) register.
+    enum: [0, 90, 180, 270]
+    default: 0
+
+  panel-timing:
+    description: |
+      Panel timing description.
+
+      For MIPI DBI panels the pixel clock and porch values are ignored,
+      but xactive/yactive must be provided.
+    type: object
+    properties:
+      clock-frequency:
+        description: Dummy pixel clock (may be 0)
+      hactive:
+        description: Horizontal resolution in pixels
+      vactive:
+        description: Vertical resolution in pixels
+      hfront-porch:
+        default: 0
+      hback-porch:
+        default: 0
+      hsync-len:
+        default: 0
+      vfront-porch:
+        default: 0
+      vback-porch:
+        default: 0
+      vsync-len:
+        default: 0
+
+    required:
+      - hactive
+      - vactive
+
+required:
+  - compatible
+  - reg
+  - panel-timing
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0 {
+            compatible = "winstar,wf35-320480ud", "ilitek,ili9488";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+
+            reset-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+
+            power-supply = <&vcc_3v3>;
+            backlight = <&backlight>;
+
+            rotation = <90>;
+
+            panel-timing {
+                hactive = <480>;
+                vactive = <320>;
+                clock-frequency = <0>;
+            };
+        };
+    };
-- 
2.34.1