[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.12.0-rc7-EK20170628 (gianluca@gianlinux) (gcc version 4.7.3 (Sourcery CodeBench Lite 2013.05-24) ) #1 SMP Wed Jun 28 17:42:43 CEST 2017 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Eurek EK360 i.MX6QP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c10e6580, node_mem_map ef6f8000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] percpu: Embedded 17 pages/cpu @ef696000 s38208 r8192 d23232 u69632 [ 0.000000] pcpu-alloc: s38208 r8192 d23232 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttymxc2,115200 rootwait noswap ip=none noinitrd rootfstype=nilfs2 root=/dev/mmcblk1p3 fec.macaddr=0x7a,0x3f,0x03,0xe3,0xa2,0xff system_rev=0xe3600000 system_serialnr=0x00000000 lcd_type=am1280800n3tz fastboot quiet loglevel=3 console=tty0 imxdrm.legacyfb_depth=32 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1021268K/1048576K available (9216K kernel code, 1044K rwdata, 2648K rodata, 2048K init, 381K bss, 27308K reserved, 0K cma-reserved, 262144K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc0a00000 (10208 kB) .init : 0xc0e00000 - 0xc1000000 (2048 kB) .data : 0xc1000000 - 0xc11052c0 (1045 kB) .bss : 0xc110db58 - 0xc116d028 ( 382 kB) [ 0.000000] ftrace: allocating 33822 entries in 100 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000024] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002342] Console: colour dummy device 80x30 [ 0.002356] console [tty0] enabled [ 0.002382] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=12000) [ 0.002396] pid_max: default: 32768 minimum: 301 [ 0.002572] Security Framework initialized [ 0.002582] Yama: becoming mindful. [ 0.002607] AppArmor: AppArmor disabled by boot time parameter [ 0.002663] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002672] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003518] CPU: Testing write buffer coherency: ok [ 0.003884] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004343] Setting up static identity map for 0x10100000 - 0x101000a0 [ 0.008962] EFI services will not be available. [ 0.009354] smp: Bringing up secondary CPUs ... [ 0.010324] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.011348] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.012375] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.012473] smp: Brought up 1 node, 4 CPUs [ 0.012482] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.012487] CPU: All CPU(s) started in SVC mode. [ 0.013552] devtmpfs: initialized [ 0.024608] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.025018] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.025035] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.025341] pinctrl core: initialized pinctrl subsystem [ 0.027292] NET: Registered protocol family 16 [ 0.029009] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.031123] cpuidle: using governor ladder [ 0.031280] cpuidle: using governor menu [ 0.032280] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.041050] vdd1p1: supplied by regulator-dummy [ 0.041638] vdd3p0: supplied by regulator-dummy [ 0.042214] vdd2p5: supplied by regulator-dummy [ 0.042805] vddarm: supplied by regulator-dummy [ 0.043424] vddpu: supplied by regulator-dummy [ 0.043982] vddsoc: supplied by regulator-dummy [ 0.057892] No ATAGs? [ 0.058045] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.058052] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.059800] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.061199] Serial: AMBA PL011 UART driver [ 0.088492] mxs-dma 110000.dma-apbh: initialized [ 0.097543] i2c i2c-0: IMX I2C adapter registered [ 0.097560] i2c i2c-0: can't use DMA, using PIO instead. [ 0.098145] i2c i2c-1: IMX I2C adapter registered [ 0.098159] i2c i2c-1: can't use DMA, using PIO instead. [ 0.098615] i2c i2c-2: IMX I2C adapter registered [ 0.098628] i2c i2c-2: can't use DMA, using PIO instead. [ 0.099697] media: Linux media interface: v0.10 [ 0.099745] Linux video capture interface: v2.00 [ 0.099824] pps_core: LinuxPPS API ver. 1 registered [ 0.099829] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.099850] PTP clock support registered [ 0.100773] Advanced Linux Sound Architecture Driver Initialized. [ 0.102581] clocksource: Switched to clocksource mxc_timer1 [ 0.173402] VFS: Disk quotas dquot_6.6.0 [ 0.173485] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.187379] NET: Registered protocol family 2 [ 0.188177] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.188257] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.188403] TCP: Hash tables configured (established 8192 bind 8192) [ 0.188567] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.188604] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.188844] NET: Registered protocol family 1 [ 0.188882] PCI: CLS 0 bytes, default 64 [ 0.189637] hw perfevents: no interrupt-affinity property for /soc/pmu, guessing. [ 0.189878] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.194228] audit: initializing netlink subsys (disabled) [ 0.194408] audit: type=2000 audit(0.191:1): state=initialized audit_enabled=0 res=1 [ 0.195530] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.195710] zbud: loaded [ 0.196324] NILFS version 2 loaded [ 0.205628] bounce: pool size: 64 pages [ 0.205682] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.205855] io scheduler noop registered [ 0.205862] io scheduler deadline registered [ 0.205940] io scheduler cfq registered (default) [ 0.205947] io scheduler mq-deadline registered [ 0.205954] io scheduler kyber registered [ 0.216446] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.216454] imx-sdma 20ec000.sdma: Falling back to user helper [ 0.223355] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.225892] Serial: AMBA driver [ 0.226846] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 23, base_baud = 5000000) is a IMX [ 0.227664] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 68, base_baud = 5000000) is a IMX [ 0.227726] console [ttymxc2] enabled [ 0.233880] etnaviv gpu-subsystem: bound 134000.gpu (ops 0xc0a9040c) [ 0.234016] etnaviv gpu-subsystem: bound 130000.gpu (ops 0xc0a9040c) [ 0.234150] etnaviv gpu-subsystem: bound 2204000.gpu (ops 0xc0a9040c) [ 0.234162] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 0.282178] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 0.330652] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 0.330666] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 0.331194] [drm] Initialized etnaviv 1.1.0 20151214 for gpu-subsystem on minor 0 [ 0.335109] libphy: Fixed MDIO Bus: probed [ 0.443067] pps pps0: new PPS source ptp0 [ 0.447653] libphy: fec_enet_mii_bus: probed [ 0.448226] fec 2188000.ethernet eth0: registered PHC device 0 [ 0.459263] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 0.461495] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 [ 0.462512] i2c /dev entries driver [ 0.465693] sdhci: Secure Digital Host Controller Interface driver [ 0.465698] sdhci: Copyright(c) Pierre Ossman [ 0.465702] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.466692] sdhci-esdhc-imx 2194000.usdhc: Failed getting OCR mask: 0 [ 0.467455] sdhci-esdhc-imx 2194000.usdhc: could not set regulator OCR (-22) [ 0.491626] sdhci-esdhc-imx 2194000.usdhc: could not set regulator OCR (-22) [ 0.510622] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 0.511285] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 0.511485] sdhci-esdhc-imx 2194000.usdhc: could not set regulator OCR (-22) [ 0.514741] sdhci-esdhc-imx 2194000.usdhc: could not set regulator OCR (-22) [ 0.529438] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.532164] mmc0: queuing unknown CIS tuple 0x80 (6 bytes) [ 0.535571] mmc0: queuing unknown CIS tuple 0x80 (8 bytes) [ 0.536951] mmc0: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.540025] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.542395] mmc0: queuing unknown CIS tuple 0x80 (5 bytes) [ 0.550756] sdhci-esdhc-imx 2194000.usdhc: could not set regulator OCR (-22) [ 0.552782] sdhci-esdhc-imx 2194000.usdhc: could not set regulator OCR (-22) [ 0.553879] sdhci-esdhc-imx 2194000.usdhc: could not set regulator OCR (-22) [ 0.555762] random: fast init done [ 0.558830] mmc0: new high speed SDIO card at address 0001 [ 0.562777] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 0.606615] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 0.606686] mmc1: host does not support reading read-only switch, assuming write-enable [ 0.607452] ledtrig-cpu: registered to indicate activity on CPUs [ 0.611809] ashmem: initialized [ 0.613631] mmc1: new high speed SDHC card at address 0001 [ 0.614419] mmcblk1: mmc1:0001 ASTC 3.72 GiB [ 0.615488] sgtl5000 0-000a: sgtl5000 revision 0x11 [ 0.616497] mmcblk1: p1 p2 p3 [ 0.645971] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 0.666477] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 0.668096] NET: Registered protocol family 10 [ 0.669216] Segment Routing with IPv6 [ 0.669291] mip6: Mobile IPv6 [ 0.669301] NET: Registered protocol family 17 [ 0.669314] mpls_gso: MPLS GSO support [ 0.671077] ThumbEE CPU extension supported. [ 0.671092] Registering SWP/SWPB emulation handler [ 0.671956] registered taskstats version 1 [ 0.672036] zswap: loaded using pool lzo/zbud [ 0.688984] rtc-pcf8563 0-0051: setting system clock to 1970-01-06 04:29:16 UTC (448156) [ 0.689751] PM: Hibernation image not present or could not be loaded. [ 0.690827] usb_otg_vbus: disabling [ 0.690837] ALSA device list: [ 0.690843] #0: imx6-ek360-sgtl5000 [ 0.859470] mmc2: new DDR MMC card at address 0001 [ 0.860329] mmcblk2: mmc2:0001 MMC08G 7.27 GiB [ 0.860794] mmcblk2boot0: mmc2:0001 MMC08G partition 1 16.0 MiB [ 0.861232] mmcblk2boot1: mmc2:0001 MMC08G partition 2 16.0 MiB [ 0.861668] mmcblk2rpmb: mmc2:0001 MMC08G partition 3 128 KiB [ 1.115044] VFS: Mounted root (nilfs2 filesystem) readonly on device 179:3. [ 1.122944] Freeing unused kernel memory: 2048K [ 2.556381] systemd-udevd[249]: starting version 215 [ 2.971909] imx-sdma 20ec000.sdma: loaded firmware 1.1 [ 3.079200] of_pwm_get(): PWM chip not found [ 3.145264] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 3.150074] CAN device driver interface [ 3.157194] flexcan 2090000.flexcan: device registered (reg_base=f1d60000, irq=29) [ 3.224689] usbcore: registered new interface driver usbfs [ 3.224765] usbcore: registered new interface driver hub [ 3.224980] usbcore: registered new device driver usb [ 3.253626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.276504] sx8656_ek: loading out-of-tree module taints kernel. [ 3.286076] input: SX8656-EK I2C Touchscreen as /devices/soc0/soc/2100000.aips-bus/21a0000.i2c/i2c-0/0-0048/input/input0 [ 3.386424] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 3.386467] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 3.406641] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 3.406927] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.406938] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.406947] usb usb1: Product: EHCI Host Controller [ 3.406954] usb usb1: Manufacturer: Linux 4.12.0-rc7-EK20170628 ehci_hcd [ 3.406961] usb usb1: SerialNumber: ci_hdrc.1 [ 3.407962] hub 1-0:1.0: USB hub found [ 3.408020] hub 1-0:1.0: 1 port detected [ 3.450881] at24 0-0050: 8192 byte 24c64 EEPROM, writable, 64 bytes/write [ 3.510482] mousedev: PS/2 mouse device common for all mice [ 3.652694] coda 2040000.vpu: Firmware code revision: 46063 [ 3.652706] coda 2040000.vpu: Initialized CODA960. [ 3.652712] coda 2040000.vpu: Unsupported firmware version: 3.1.1 [ 3.653418] coda 2040000.vpu: codec registered as /dev/video[0-1] [ 3.713249] sdhci-esdhc-imx 2194000.usdhc: could not set regulator OCR (-22) [ 3.724928] usbcore: registered new interface driver brcmfmac [ 4.221332] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d [ 6.726349] NILFS (mmcblk1p3): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds [ 7.449505] device-mapper: uevent: version 1.0.3 [ 7.449840] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 7.977736] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null) [ 9.069939] Generic PHY 2188000.ethernet-1:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet-1:03, irq=-1) [ 9.070270] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.994021] random: crng init done [ 11.686315] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.310755] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 12.310786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.531607] systemd-logind[1674]: New seat seat0. [ 20.541215] systemd-logind[1674]: Failed to start user service: Unknown unit: user@0.service [ 20.544188] systemd-logind[1674]: New session c1 of user root.