From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Oleksij Rempel <o.rempel@pengutronix.de>, barebox@lists.infradead.org
Cc: david@protonic.nl
Subject: Re: [PATCH v4 2/3] of: base: register DT root as device
Date: Tue, 11 Aug 2020 16:24:58 +0200 [thread overview]
Message-ID: <280a8e88-109f-331f-8579-74c070908ff2@pengutronix.de> (raw)
In-Reply-To: <20200720063921.7547-3-o.rempel@pengutronix.de>
Hello Oleksij,
On 7/20/20 8:39 AM, Oleksij Rempel wrote:
> A usual board file contains at least one of_machine_is_compatible().
> Some of the have a rather long list with complicated version logic.
>
> To avoid own implementation for driver management, register the root node
> of device tree as platform device. So, the main platform bus can attach
> proper board driver. After this patch a typical board.c file can reuse
> existing driver infrastructure.
>
> After this patch, you will be able to see all registered board drivers
> with drvinfo as fallow:
this patch breaks boot on the Linux Automation MC-1.
of_platform_device_create() uses of_device_make_bus_id() to generate
a name, but that function is a no-op for the root node.
This results in a platform device with dev->name == NULL, which
inside register_device() -> get_device_by_name_id() -> strcmp
leads to a NULL pointer dereference.
You should probably not use of_platform_device_create, but use
platform_device_register directly and set a suitable name
upfront in the struct device_d you initialize.
Cheers
Ahmad
> ...
> board-embest-riot
> board-protonic-imx6
> machine.of
> ...
>
> With devinfo, you'll be able to get some board specific information,
> if this is implemented:
> barebox@Protonic PRTI6Q board:/ devinfo machine.of
> Driver: board-protonic-imx6
> Bus: platform
> Parameters:
> boardid: 0 (type: uint32)
> boardrev: 1 (type: uint32)
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> drivers/of/base.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/of/base.c b/drivers/of/base.c
> index 4754fcb98f..b76e424da0 100644
> --- a/drivers/of/base.c
> +++ b/drivers/of/base.c
> @@ -2141,6 +2141,7 @@ static void of_probe_memory(void)
> int of_probe(void)
> {
> struct device_node *firmware;
> + struct device_d *dev;
>
> if(!root_node)
> return -ENODEV;
> @@ -2157,6 +2158,10 @@ int of_probe(void)
> if (firmware)
> of_platform_populate(firmware, NULL, NULL);
>
> + dev = of_platform_device_create(root_node, NULL);
> + if (dev)
> + dev_set_name(dev, "%s.of", "machine");
> +
> of_clk_init(root_node, NULL);
> of_platform_populate(root_node, of_default_bus_match_table, NULL);
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-08-11 14:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-20 6:39 [PATCH v4 0/3] introduce board-driver support Oleksij Rempel
2020-07-20 6:39 ` [PATCH v4 1/3] devinfo: do not dump the device node for the root node Oleksij Rempel
2020-07-20 8:35 ` Lucas Stach
2020-07-20 6:39 ` [PATCH v4 2/3] of: base: register DT root as device Oleksij Rempel
2020-08-11 14:24 ` Ahmad Fatoum [this message]
2020-07-20 6:39 ` [PATCH v4 3/3] ARM: embest-riotboard: port board file to the driver model Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=280a8e88-109f-331f-8579-74c070908ff2@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=david@protonic.nl \
--cc=o.rempel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox