From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>,
BAREBOX <barebox@lists.infradead.org>
Cc: "Claude Sonnet 4.5" <noreply@anthropic.com>
Subject: Re: [PATCH v2 04/21] ARM: implement elf_apply_relocations() for ELF relocation support
Date: Tue, 6 Jan 2026 14:07:24 +0100 [thread overview]
Message-ID: <28e51b87-b6b0-4b21-b223-f7764102db91@pengutronix.de> (raw)
In-Reply-To: <20260106-pbl-load-elf-v2-4-487bc760f045@pengutronix.de>
Hello,
On 1/6/26 1:53 PM, Sascha Hauer wrote:
> Implement architecture-specific ELF relocation handlers for ARM32 and ARM64.
> The implementation reuses the existing relocate_image().
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
But a bit more verbose than needed:
> --- a/arch/arm/lib32/reloc.c
> +++ b/arch/arm/lib32/reloc.c
> @@ -6,6 +6,7 @@
> #include <barebox.h>
> #include <elf.h>
> #include <debug_ll.h>
> +#include <linux/printk.h>
Unused?
> +/*
> + * Apply ARM32 ELF relocations
> + */
> +int elf_apply_relocations(struct elf_image *elf, const void *dyn_seg)
> +{
> + Elf32_Rel *rel;
> + void *rel_ptr;
> + u64 relsz;
> + phys_addr_t base = (phys_addr_t)elf->reloc_offset;
> + int ret;
> +
> + ret = elf_parse_dynamic_section_rel(elf, dyn_seg, &rel_ptr, &relsz);
> + if (ret)
> + return ret;
> +
> + rel = (Elf32_Rel *)rel_ptr;
Nitpick: rel can be dropped and rel_ptr used instead.
> +
> + relocate_image(base, rel, (void *)rel + relsz, NULL, NULL);
> +
> + return 0;
> +}
> diff --git a/arch/arm/lib64/reloc.c b/arch/arm/lib64/reloc.c
> index 2288f9e2e336887c5edfbf6b080f487394754113..50bd0b88fae0a59a6a86a84c1df0743ac158e06c 100644
> --- a/arch/arm/lib64/reloc.c
> +++ b/arch/arm/lib64/reloc.c
> @@ -7,8 +7,7 @@
> #include <elf.h>
> #include <debug_ll.h>
> #include <asm/reloc.h>
> -
> -#define R_AARCH64_RELATIVE 1027
> +#include <linux/printk.h>
Unused?
> +/*
> + * Apply ARM64 ELF relocations
> + */
> +int elf_apply_relocations(struct elf_image *elf, const void *dyn_seg)
> +{
> + Elf64_Rela *rela;
> + void *rel_ptr;
> + u64 relasz;
> + phys_addr_t base = (phys_addr_t)elf->reloc_offset;
> + int ret;
> +
> + ret = elf_parse_dynamic_section_rela(elf, dyn_seg, &rel_ptr, &relasz);
> + if (ret)
> + return ret;
> +
> + rela = (Elf64_Rela *)rel_ptr;
Same thing.
> +
> + relocate_image(base, rela, (void *)rela + relasz, NULL, NULL);
> +
> + return 0;
> +}
Cheers,
Ahmad
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2026-01-06 13:08 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-06 12:53 [PATCH v2 00/21] PBL: Add PBL ELF loading support with dynamic relocations Sascha Hauer
2026-01-06 12:53 ` [PATCH v2 01/21] elf: only accept images matching the native ELF_CLASS Sascha Hauer
2026-01-06 12:58 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 02/21] elf: build for PBL as well Sascha Hauer
2026-01-06 13:26 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 03/21] elf: add dynamic relocation support Sascha Hauer
2026-01-06 13:51 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 04/21] ARM: implement elf_apply_relocations() for ELF " Sascha Hauer
2026-01-06 13:07 ` Ahmad Fatoum [this message]
2026-01-06 14:25 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 05/21] riscv: define generic relocate_image Sascha Hauer
2026-01-06 13:10 ` Ahmad Fatoum
2026-01-06 13:11 ` Sascha Hauer
2026-01-06 12:53 ` [PATCH v2 06/21] riscv: implement elf_apply_relocations() for ELF relocation support Sascha Hauer
2026-01-06 13:11 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 07/21] elf: implement elf_load_inplace() Sascha Hauer
2026-01-06 13:53 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 08/21] elf: create elf_open_binary_into() Sascha Hauer
2026-01-06 13:55 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 09/21] Makefile: add barebox.elf build target Sascha Hauer
2026-01-06 13:13 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 10/21] PBL: allow to link ELF image into PBL Sascha Hauer
2026-01-06 13:18 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 11/21] mmu: add MAP_CACHED_RO mapping type Sascha Hauer
2026-01-06 13:14 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 12/21] mmu: introduce pbl_remap_range() Sascha Hauer
2026-01-06 13:15 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 13/21] ARM: use relative jumps in exception table Sascha Hauer
2026-01-06 13:57 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 14/21] ARM: exceptions: make in-binary exception table const Sascha Hauer
2026-01-06 14:00 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 15/21] ARM: linker script: create separate PT_LOAD segments for text, rodata, and data Sascha Hauer
2026-01-06 14:05 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 16/21] ARM: link ELF image into PBL Sascha Hauer
2026-01-06 14:06 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 17/21] ARM: PBL: setup MMU with proper permissions from ELF segments Sascha Hauer
2026-01-06 14:10 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 18/21] riscv: link ELF image into PBL Sascha Hauer
2026-01-06 14:11 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 19/21] riscv: linker script: create separate PT_LOAD segments for text, rodata, and data Sascha Hauer
2026-01-06 14:12 ` Ahmad Fatoum
2026-01-08 15:25 ` Sascha Hauer
2026-01-06 12:53 ` [PATCH v2 20/21] riscv: Allwinner D1: Drop M-Mode Sascha Hauer
2026-01-06 13:11 ` Ahmad Fatoum
2026-01-06 12:53 ` [PATCH v2 21/21] riscv: add ELF segment-based memory protection with MMU Sascha Hauer
2026-01-06 14:20 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=28e51b87-b6b0-4b21-b223-f7764102db91@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=noreply@anthropic.com \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox