From: "Boulais, Marc-Andre" <maboulais@rheinmetall.ca>
To: Barebox List <barebox@lists.infradead.org>
Subject: Generate MLO for phytec-phycore-omap4460
Date: Fri, 6 Feb 2015 12:56:31 +0000 [thread overview]
Message-ID: <29A2697B0516A946B1023D5E798DFCF67BAB7263@mail-ying> (raw)
Good morning,
I am currently trying to build the MLO for the omap4460 on a Phytec Phycore board. In order to build it, I do the following procedure, but I get this size error at the end:
> make ARCH=arm CROSS_COMPILE=... phytec-phycore-omap4460-xload_defconfig
> make
....
LD barebox
SYSMAP System.map
OBJCOPY barebox.bin
CHKSIZE barebox.bin
barebox.bin size 53168 > of the maximum size 49152
make: *** [barebox.bin] Error 1
Curiously enough, the MLO is bigger than the 2nd stage barebox.bin I would generate with the config phytec-phycore-omap4460_defconfig.
In the documentation (boards/omap.rst), there is mention of a "barebox.bin.ift" file that corresponds to the MLO. However I don't have this file...only barebox and barebox.bin.
Is my build procedure correct ?
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2015-02-06 12:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-06 12:56 Boulais, Marc-Andre [this message]
2015-02-06 13:29 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=29A2697B0516A946B1023D5E798DFCF67BAB7263@mail-ying \
--to=maboulais@rheinmetall.ca \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox