From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from moh2-ve3.go2.pl ([193.17.41.208]) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1V1aYC-0006gw-2G for barebox@lists.infradead.org; Tue, 23 Jul 2013 11:14:41 +0000 Received: from moh2-ve3.go2.pl (unknown [10.0.0.208]) by moh2-ve3.go2.pl (Postfix) with ESMTP id 5F65737060B for ; Tue, 23 Jul 2013 13:13:59 +0200 (CEST) Received: from o2.pl (unknown [10.0.0.36]) by moh2-ve3.go2.pl (Postfix) with SMTP for ; Tue, 23 Jul 2013 13:13:59 +0200 (CEST) From: =?UTF-8?Q?dariusz.s93?= Mime-Version: 1.0 Message-ID: <2b0f708c.5533168.51ee6577.50113@o2.pl> Date: Tue, 23 Jul 2013 13:13:59 +0200 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: =?UTF-8?Q?Raspberry_Pi_net_boot_using_barebox.?= To: barebox@lists.infradead.org Hello! I find this thread while googling today: http://comments.gmane.org/gmane.comp.boot-loaders.barebox/4051 I downloaded barebox package from official site and some cross-compilers from github/raspberry I configured barebox for ARM architecture and turned on menuconfig. Then I type make and press enter - and I noticed some new files in barebox directory same as those from this thread: http://www.raspberrypi.org/phpBB3/viewtopic.php?t=25087&p=230000 I formated sd card with fat32 and copy on it 3 files same way like man from this post http://comments.gmane.org/gmane.comp.boot-loaders.barebox/4051 I downloaded loader.bin file and start.elf file from history (setp. 2012) version of raspberry firmware from github. Then i booted PI - but nothing happens - there was only rainbow on the screen all time. What should i do? Let me recall - all my knowledge how to boot RPI with Barebox comes from this post >>> Yes, it works for me. You need an sd card with a single partition fat32 with inside bootcode.bin, loader.bin and start.elf (you can find the files here https://github.com/raspberrypi/firmware/tree/master/boot) Then just copy barebox.bin on the card and rename it kernel.img. Please, let me know if you have any problem. Thank you, -- Carlo Caione <<< Sorry for my english. _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox