From mboxrd@z Thu Jan 1 00:00:00 1970 Delivery-date: Thu, 10 Jul 2025 20:59:30 +0200 Received: from metis.whiteo.stw.pengutronix.de ([2a0a:edc0:2:b01:1d::104]) by lore.white.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.96) (envelope-from ) id 1uZwUU-00G89b-28 for lore@lore.pengutronix.de; Thu, 10 Jul 2025 20:59:30 +0200 Received: from bombadil.infradead.org ([2607:7c80:54:3::133]) by metis.whiteo.stw.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1uZwUT-0002tf-W6 for lore@pengutronix.de; Thu, 10 Jul 2025 20:59:30 +0200 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Transfer-Encoding: Content-Type:In-Reply-To:From:References:To:Subject:MIME-Version:Date: Message-ID:Reply-To:Cc:Content-ID:Content-Description:Resent-Date:Resent-From :Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=Uri8d9Q1KczD4MQtAQFi2v2WSVEVxgIgqrDNxrPgX+s=; b=K6kZ5SEaZcuZ6FkHrcl/DwBrMY MlLFk822qwrDEetp2ucGspocY8KMWLgAcdOkH+/alGYBdiiG1txjKkxuX2q6Gs/Y9ClU0AKUAehb6 rW7H0x+e5U83G+biWYoypp+Fx5p4rmUH2P320nCYfxkQd2B1pNi+RiR1PJw/Ax/F0rHD+GuCfkH/g XS/8VtezHG7mufYA/BHtMB/1tcL2NREbZQ64F/8UszTGEUnHshwUCuZiW9ij6KqcEhuDblOpGXHgi ccdB1dPHmgRldRKNxOY5tD3FqbHvW28GGdDx37hjrYTN9mGl/NvRhq49Zx7ZtzGaZQzIA04HvV0dJ 1njKTpcA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.98.2 #2 (Red Hat Linux)) id 1uZwUA-0000000ClCy-26Pg; Thu, 10 Jul 2025 18:59:10 +0000 Received: from cczrelay01.in2p3.fr ([134.158.66.141]) by bombadil.infradead.org with esmtps (Exim 4.98.2 #2 (Red Hat Linux)) id 1uZtUU-0000000CIjD-1LBX for barebox@lists.infradead.org; Thu, 10 Jul 2025 15:47:20 +0000 Received: from [134.158.124.135] (clrelecpo09w.in2p3.fr [134.158.124.135]) (authenticated bits=0) by cczrelay01.in2p3.fr (8.14.4/8.14.4) with ESMTP id 56AFlFXP013136 (version=TLSv1/SSLv3 cipher=AES128-GCM-SHA256 bits=128 verify=NO) for ; Thu, 10 Jul 2025 17:47:15 +0200 Message-ID: <2cb8676a-7682-41d0-aa09-5a02083b4827@clermont.in2p3.fr> Date: Thu, 10 Jul 2025 17:47:14 +0200 MIME-Version: 1.0 User-Agent: Mozilla Thunderbird To: MList-Barebox References: <9026c709-5e5f-4545-94ca-ea78ea431082@clermont.in2p3.fr> Content-Language: fr From: David Picard In-Reply-To: Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20250710_084718_629794_84402C57 X-CRM114-Status: GOOD ( 23.84 ) X-BeenThere: barebox@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "barebox" X-SA-Exim-Connect-IP: 2607:7c80:54:3::133 X-SA-Exim-Mail-From: barebox-bounces+lore=pengutronix.de@lists.infradead.org X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on metis.whiteo.stw.pengutronix.de X-Spam-Level: X-Spam-Status: No, score=-5.1 required=4.0 tests=AWL,BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,RCVD_IN_DNSWL_MED,SPF_HELO_NONE,SPF_NONE autolearn=ham autolearn_force=no version=3.4.2 Subject: Re: boards/enclustra-sa2: add new board (HELP NEEDED) X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on metis.whiteo.stw.pengutronix.de) Last output with CONFIG_DEBUG_INITCALLS enabled: https://paste.debian.net/1385224/, line 24 : '%' is at top of function, 'C' is before setup_c() and 'B' is before pbl_barebox_break() David Le 04/07/2025 à 17:09, Ahmad Fatoum a écrit : > Hello David, > > On 7/3/25 16:21, David Picard wrote: >> Hello, >> >> I'm trying to port the Enclustra SA2 module. I started off the Terasic >> DE0 nano Soc board, that I could run with success previously. They both >> have a Cyclone V SoC FPGA. I added some pr_debug(). >> >> My code is here, in the board-enclustra-sa2 branch: >> https://github.com/dpproto/barebox >> >> It hangs when the execution jumps to the uncompressed Barebox image, and >> I'm really stuck. > It's very interesting to know that this is actually the second > decompression. The first stage (barebox-socfpga-sa2-xload.img) succeeded > up to 'starting bootloader...' and then the output you have after that > is the prebootloader of the second stage (barebox-socfpga-sa2.img). > > The decompressed barebox proper of the first stage already ran from > within SDRAM, so your SDRAM setup might not be to blame. > > For a more complete picture, could you enable CONFIG_DEBUG_PBL and > CONFIG_DEBUG_LL also for the first stage and include them in your next mail? > >> Enclustra provides a U-Boot configuration, with handoff files. I tried >> to compare them with those I copied from a sample Quartus project they >> provide too. I couldn't notice striking differences, although it's not >> easy to compare because they used an older version of Quartus. >> >> - The addresses and sizes in the log output below don't seem to exceed >> SDRAM boundaries, do they? >> - Any hint on anything to check? > I expanded a bit on Sascha's suggestions in the troubleshooting guide > I just sent out. I hope this will be helpful to you in pinpointing your > issue. Looking at the branch you pushed to your repository, I notice > the following in no particular order: > > - you are missing a /chosen/stdout-path. You probably want to set it > to silence the 'No consoles were activated' warning and get > early output, even without CONFIG_DEBUG_LL > > - As Sascha mentioned, calling pr_debug before relocation can > introduce bugs of its own, so stick to putc_ll('@') if unsure > > - It would be interesting to see if CONFIG_PBL_VERIFY_PIGGY succeeds > and if an early putc_ll() in start.c as suggested by Sascha > would give any output. > > Cheers, > Ahmad > >> David >> >> ============================= >> barebox 2025.06.1 #1 Thu Jul 3 10:53:43 CEST 2025 >> >> >> Board: SoCFPGA >> No consoles were activated. Activating all consoles as fallback! >> dw_mmc dw_mmc0: registered as mci0 >> mci0: detected SD card version 2.0 >> mci0: registered disk0 >> starting bootloader... >> arch/arm/boards/enclustra-sa2/lowlevel.c: __start_socfpga_sa2() >>> start >> include/mach/socfpga/lowlevel.h: start_socfpga_c5_common() >>> start >> include/mach/socfpga/lowlevel.h: start_socfpga_c5_common() >>> >> arm_cpu_lowlevel_init() OK >> include/mach/socfpga/lowlevel.h: start_socfpga_c5_common() >>> >> fdt_blob=0x00002320 fdt=0x1ff87ae8 size=0x40000000 >> include/mach/socfpga/lowlevel.h: start_socfpga_c5_common() >>> calling >> barebox_arm_entry()... >> uncompress.c: memory at 0x00000000, size 0x40000000 >> mmu: enabling MMU, ttb @ 0x3ffe0000 >> endmem                = 0x40000000 >> arm_mem_scratch       = 0x3fff8000+0x00008000 >> arm_mem_stack         = 0x3fff0000+0x00008000 >> arm_mem_ttb           = 0x3ffe0000+0x00010000 >> arm_mem_barebox_image = 0x3fe00000+0x00200000 >> arm_mem_early_malloc  = 0x3fde0000+0x00020000 >> membase               = 0x00000000+0x40000000 >> uncompress.c: uncompressing barebox binary at 0x1ff8c800 (size >> 0x00056b67) to 0x3fe00000 (uncompressed size: 0x000778b0) >> uncompress.c: jumping to uncompressed image at 0x3fe00001 >> uncompress.c: calling armv7_switch_to_hyp()... >> uncompress.c: armv7_switch_to_hyp() OK. Now jumping... >> ============================= >> >> >>