From: ledphilippe@gmail.com
To: barebox@lists.infradead.org, ledphilippe@gmail.com
Subject: [PATCH] net: cpsw: Fix crashes on beaglebone black
Date: Sat, 27 Dec 2014 15:39:26 +0100 [thread overview]
Message-ID: <3444471.6ba7DjKbWe@laroq> (raw)
Hello,
The current version (2014.12.0-00116-ge91702b) crashes on the beaglebone black
if the ethernet driver is enabled. Here is the trace:
barebox 2014.12.0-00116-ge91702b #15 Sat Dec 27 15:30:25 CET 2014
Board: TI AM335x BeagleBone black
detected 'BeagleBone Black'
cpsw 4a100000.ethernet: detected phy mask 0x1
mdio_bus: miibus0: probed
eth0: got preset MAC address: d0:39:72:41:0a:26
cpsw 4a100000.ethernet: probe failed: I/O error
unable to handle paging request at address 0x6e6f62f2
pc : [<9fe24e4a>] lr : [<9fe0751f>]
sp : 9ffffe60 ip : ffffffff fp : 00000000
r10: 8ff1d8b8 r9 : 8ff12534 r8 : 8ff1d974
r7 : ffffffff r6 : 8ff1d8e0 r5 : 9fe55220 r4 : 6e6f62f2
r3 : 00000000 r2 : 00000000 r1 : 8ff1d8e0 r0 : 6e6f62f2
Flags: nZCV IRQs off FIQs on Mode SVC_32
[<9fe24e4a>] (strcmp+0xc/0x1a) from [<9fe0751f>]
(get_device_by_name_id+0x1f/0x38)
[<9fe0751f>] (get_device_by_name_id+0x1f/0x38) from [<9fe07837>]
(register_device+0x17/0xc8)
[<9fe07837>] (register_device+0x17/0xc8) from [<9fe1dcb3>]
(of_platform_device_create+0x17b/0x1b0)
[<9fe1dcb3>] (of_platform_device_create+0x17b/0x1b0) from [<9fe1dd13>]
(of_platform_bus_create+0x2b/0x68)
[<9fe1dd13>] (of_platform_bus_create+0x2b/0x68) from [<9fe1dda7>]
(of_platform_populate+0x2f/0x44)
[<9fe1dda7>] (of_platform_populate+0x2f/0x44) from [<9fe07967>]
(platform_probe+0x9/0xa)
[<9fe07967>] (platform_probe+0x9/0xa) from [<9fe07561>]
(device_probe+0x11/0x44)
[<9fe07561>] (device_probe+0x11/0x44) from [<9fe075bb>]
(match.part.2+0x27/0x2e)
[<9fe075bb>] (match.part.2+0x27/0x2e) from [<9fe076d5>]
(register_driver+0x59/0x74)
[<9fe076d5>] (register_driver+0x59/0x74) from [<9fe00827>]
(start_barebox+0x1b/0xb8)
[<9fe00827>] (start_barebox+0x1b/0xb8) from [<9fe3291f>] (__start+0xa3/0xb8)
[<9fe3291f>] (__start+0xa3/0xb8) from [<9fe00005>] (__bare_init_start+0x1/0xc)
[<9fe32349>] (unwind_backtrace+0x1/0x58) from [<9fe258e9>] (panic+0x1d/0x34)
[<9fe258e9>] (panic+0x1d/0x34) from [<9fe327e1>] (do_exception+0xd/0x10)
[<9fe327e1>] (do_exception+0xd/0x10) from [<9fe32849>]
(do_data_abort+0x21/0x2c)
[<9fe32849>] (do_data_abort+0x21/0x2c) from [<9fe32508>]
(data_abort+0x48/0x60)
The following patch resolves the problem on my board. Please review it and
check if it is fine.
Regards,
Signed-off-by: Philippe Leduc <ledphilippe@gmail.com>
---
drivers/net/cpsw.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
index b6618ad..311cd44 100644
--- a/drivers/net/cpsw.c
+++ b/drivers/net/cpsw.c
@@ -1202,10 +1202,8 @@ int cpsw_probe(struct device_d *dev)
struct phy_device *phy;
phy = mdiobus_scan(&priv->miibus, priv->slaves[i].phy_id);
- if (IS_ERR(phy)) {
- ret = PTR_ERR(phy);
- goto out;
- }
+ if (IS_ERR(phy))
+ continue;
phy->dev.device_node = priv->slaves[i].dev.device_node;
ret = phy_register_device(phy);
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2014-12-27 14:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-27 14:39 ledphilippe [this message]
2015-01-05 12:35 ` Teresa Gámez
2015-01-06 14:16 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3444471.6ba7DjKbWe@laroq \
--to=ledphilippe@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox