Re: [PATCH v2 12/12] ARM: Layerscape: Update Documentation for TF-A

[Ahmad Fatoum <a.fatoum@pengutronix.de>]

On 22.10.24 09:46, Sascha Hauer wrote:
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

> ---
>  Documentation/boards/layerscape.rst | 13 +++++++++++--
>  1 file changed, 11 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/boards/layerscape.rst b/Documentation/boards/layerscape.rst
> index ae089539e5..5791b86326 100644
> --- a/Documentation/boards/layerscape.rst
> +++ b/Documentation/boards/layerscape.rst
> @@ -37,13 +37,22 @@ Flashing to the eMMC is possible likewise::
>    In such a case, using eMMC and SD-Card at the same time is not possible.
>    Boot from QSPI to flash the eMMC.
>  
> +Get and Build the Trusted Firmware A
> +------------------------------------
> +
> +Get TF-A from https://github.com/ARM-software/arm-trusted-firmware.git and build with::
> +
> +  make PLAT=ls1046ardb
> +  cp build/ls1046ardb/release/bl31.bin ${barebox_srctree}/firmware/ls1046a-bl31.bin
> +
> +Although the binary is for a specific board (LS1046A-RDB) it should work on any other
> +board as well.
> +
>  Firmware Blobs
>  --------------
>  
>  Network: `fsl_fman_ucode_ls1046_r1.0_106_4_18.bin <https://github.com/NXP/qoriq-fm-ucode/raw/integration/fsl_fman_ucode_ls1046_r1.0_106_4_18.bin>`_.
>  
> -PSCI Firmware: `ppa-ls1046a.bin <https://github.com/NXP/qoriq-ppa-binary/raw/integration/soc-ls1046/ppa.itb>`_.
> -
>  Layerscape boards
>  -----------------
>  
> 


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |