From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: "Raphaël Poggi" <raphio98@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/2] pinctrl: at91: add pinctrl driver
Date: Tue, 5 Aug 2014 18:26:10 +0800 [thread overview]
Message-ID: <39BF03AA-21A6-4950-8208-DF26590A4304@jcrosoft.com> (raw)
In-Reply-To: <CACqcpZAC77K-NgJYEATsoXKECa6ER0uHsU284D_qNOU7DecYiA@mail.gmail.com>
On Aug 5, 2014, at 2:37 AM, Raphaël Poggi <raphio98@gmail.com> wrote:
>
> I have planned to add device tree support for the AT91 port.
>
> So I port the pinctrl driver from linux to barebox to be able to use
> the pinctrl in device tree, but maybe I made a mistake and there is
> another solution.
>
I’ve a version already that I need to update and send
Best Regards,
J.
> Best Regards,
> Raphaël
>
> 2014-08-04 20:26 GMT+02:00 Jean-Christophe PLAGNIOL-VILLARD
> <plagnioj@jcrosoft.com>:
>> why do we need it on barebox?
>>
>> this driver was design for dt-only in linux
>>
>> Best Regards,
>> J.
>> On Aug 1, 2014, at 9:24 PM, Raphaël Poggi <poggi.raph@gmail.com> wrote:
>>
>>> This driver is based on mach-at91/gpio.c and linux pinctrl driver.
>>> The driver contains the gpio and pinctrl parts (like in linux) because the two parts
>>> share some structures and logics.
>>>
>>> Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
>>> ---
>>> drivers/pinctrl/Kconfig | 6 +
>>> drivers/pinctrl/Makefile | 1 +
>>> drivers/pinctrl/pinctrl-at91.c | 529 ++++++++++++++++++++++++++++++++++++++++
>>> drivers/pinctrl/pinctrl-at91.h | 148 +++++++++++
>>> 4 files changed, 684 insertions(+)
>>> create mode 100644 drivers/pinctrl/pinctrl-at91.c
>>> create mode 100644 drivers/pinctrl/pinctrl-at91.h
>>>
>>> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
>>> index dffaa4e..ce55c7b 100644
>>> --- a/drivers/pinctrl/Kconfig
>>> +++ b/drivers/pinctrl/Kconfig
>>> @@ -7,6 +7,12 @@ config PINCTRL
>>> from the devicetree. Legacy drivers here may not need this core
>>> support but instead provide their own SoC specific APIs
>>>
>>> +config PINCTRL_AT91
>>> + select PINCTRL
>>> + bool
>>> + help
>>> + The pinmux controller found on AT91 SoCs.
>>> +
>>> config PINCTRL_IMX_IOMUX_V1
>>> select PINCTRL if OFDEVICE
>>> bool
>>> diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
>>> index 566ba11..3ea8649 100644
>>> --- a/drivers/pinctrl/Makefile
>>> +++ b/drivers/pinctrl/Makefile
>>> @@ -1,4 +1,5 @@
>>> obj-$(CONFIG_PINCTRL) += pinctrl.o
>>> +obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
>>> obj-$(CONFIG_PINCTRL_IMX_IOMUX_V1) += imx-iomux-v1.o
>>> obj-$(CONFIG_PINCTRL_IMX_IOMUX_V2) += imx-iomux-v2.o
>>> obj-$(CONFIG_PINCTRL_IMX_IOMUX_V3) += imx-iomux-v3.o
>>> diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
>>> new file mode 100644
>>> index 0000000..a92a898
>>> --- /dev/null
>>> +++ b/drivers/pinctrl/pinctrl-at91.c
>>> @@ -0,0 +1,529 @@
>>> +/*
>>> + * Copyright (C) 2005 HP Labs
>>> + * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
>>> + * Copyright (C) 2014 Raphaël Poggi
>>> + *
>>> + * See file CREDITS for list of people who contributed to this
>>> + * project.
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation; either version 2 of
>>> + * the License, or (at your option) any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + */
>>> +
>>> +#include <common.h>
>>> +#include <command.h>
>>> +#include <complete.h>
>>> +#include <linux/clk.h>
>>> +#include <linux/err.h>
>>> +#include <errno.h>
>>> +#include <io.h>
>>> +#include <gpio.h>
>>> +#include <init.h>
>>> +#include <driver.h>
>>> +#include <getopt.h>
>>> +
>>> +#include <mach/at91_pio.h>
>>> +
>>> +#include <pinctrl.h>
>>> +
>>> +#include "pinctrl-at91.h"
>>> +
>>> +struct at91_pinctrl {
>>> + struct pinctrl_device pctl;
>>> + struct at91_pinctrl_mux_ops *ops;
>>> +};
>>> +
>>> +struct at91_gpio_chip {
>>> + struct gpio_chip chip;
>>> + void __iomem *regbase; /* PIO bank virtual address */
>>> + struct at91_pinctrl_mux_ops *ops; /* ops */
>>> +};
>>> +
>>> +enum at91_mux {
>>> + AT91_MUX_GPIO = 0,
>>> + AT91_MUX_PERIPH_A = 1,
>>> + AT91_MUX_PERIPH_B = 2,
>>> + AT91_MUX_PERIPH_C = 3,
>>> + AT91_MUX_PERIPH_D = 4,
>>> +};
>>> +
>>> +#define MAX_GPIO_BANKS 5
>>> +#define to_at91_pinctrl(c) container_of(c, struct at91_pinctrl, pctl);
>>> +#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
>>> +
>>> +#define PULL_UP (1 << 0)
>>> +#define MULTI_DRIVE (1 << 1)
>>> +#define DEGLITCH (1 << 2)
>>> +#define PULL_DOWN (1 << 3)
>>> +#define DIS_SCHMIT (1 << 4)
>>> +#define DEBOUNCE (1 << 16)
>>> +#define DEBOUNCE_VAL_SHIFT 17
>>> +#define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT)
>>> +
>>> +static int gpio_banks = 0;
>>> +
>>> +static struct at91_gpio_chip gpio_chip[MAX_GPIO_BANKS];
>>> +
>>> +static inline void __iomem *pin_to_controller(struct at91_pinctrl *info, unsigned pin)
>>> +{
>>> + pin /= MAX_NB_GPIO_PER_BANK;
>>> + if (likely(pin < gpio_banks))
>>> + return gpio_chip[pin].regbase;
>>> +
>>> + return NULL;
>>> +}
>>> +
>>> +/**
>>> + * struct at91_pinctrl_mux_ops - describes an At91 mux ops group
>>> + * on new IP with support for periph C and D the way to mux in
>>> + * periph A and B has changed
>>> + * So provide the right call back
>>> + * if not present means the IP does not support it
>>> + * @get_periph: return the periph mode configured
>>> + * @mux_A_periph: mux as periph A
>>> + * @mux_B_periph: mux as periph B
>>> + * @mux_C_periph: mux as periph C
>>> + * @mux_D_periph: mux as periph D
>>> + * @set_deglitch: enable/disable deglitch
>>> + * @set_debounce: enable/disable debounce
>>> + * @set_pulldown: enable/disable pulldown
>>> + * @disable_schmitt_trig: disable schmitt trigger
>>> + */
>>> +struct at91_pinctrl_mux_ops {
>>> + enum at91_mux (*get_periph)(void __iomem *pio, unsigned mask);
>>> + void (*mux_A_periph)(void __iomem *pio, unsigned mask);
>>> + void (*mux_B_periph)(void __iomem *pio, unsigned mask);
>>> + void (*mux_C_periph)(void __iomem *pio, unsigned mask);
>>> + void (*mux_D_periph)(void __iomem *pio, unsigned mask);
>>> + bool (*get_deglitch)(void __iomem *pio, unsigned pin);
>>> + void (*set_deglitch)(void __iomem *pio, unsigned mask, bool in_on);
>>> + bool (*get_debounce)(void __iomem *pio, unsigned pin, u32 *div);
>>> + void (*set_debounce)(void __iomem *pio, unsigned mask, bool in_on, u32 div);
>>> + bool (*get_pulldown)(void __iomem *pio, unsigned pin);
>>> + void (*set_pulldown)(void __iomem *pio, unsigned mask, bool in_on);
>>> + bool (*get_schmitt_trig)(void __iomem *pio, unsigned pin);
>>> + void (*disable_schmitt_trig)(void __iomem *pio, unsigned mask);
>>> +};
>>> +
>>> +static enum at91_mux at91_mux_pio3_get_periph(void __iomem *pio, unsigned mask)
>>> +{
>>> + unsigned select;
>>> +
>>> + if (__raw_readl(pio + PIO_PSR) & mask)
>>> + return AT91_MUX_GPIO;
>>> +
>>> + select = !!(__raw_readl(pio + PIO_ABCDSR1) & mask);
>>> + select |= (!!(__raw_readl(pio + PIO_ABCDSR2) & mask) << 1);
>>> +
>>> + return select + 1;
>>> +}
>>> +
>>> +static enum at91_mux at91_mux_get_periph(void __iomem *pio, unsigned mask)
>>> +{
>>> + unsigned select;
>>> +
>>> + if (__raw_readl(pio + PIO_PSR) & mask)
>>> + return AT91_MUX_GPIO;
>>> +
>>> + select = __raw_readl(pio + PIO_ABSR) & mask;
>>> +
>>> + return select + 1;
>>> +}
>>> +
>>> +static bool at91_mux_get_deglitch(void __iomem *pio, unsigned pin)
>>> +{
>>> + return (__raw_readl(pio + PIO_IFSR) >> pin) & 0x1;
>>> +}
>>> +
>>> +static bool at91_mux_pio3_get_debounce(void __iomem *pio, unsigned pin, u32 *div)
>>> +{
>>> + *div = __raw_readl(pio + PIO_SCDR);
>>> +
>>> + return (__raw_readl(pio + PIO_IFSCSR) >> pin) & 0x1;
>>> +}
>>> +
>>> +static bool at91_mux_pio3_get_pulldown(void __iomem *pio, unsigned pin)
>>> +{
>>> + return (__raw_readl(pio + PIO_PPDSR) >> pin) & 0x1;
>>> +}
>>> +
>>> +static bool at91_mux_pio3_get_schmitt_trig(void __iomem *pio, unsigned pin)
>>> +{
>>> + return (__raw_readl(pio + PIO_SCHMITT) >> pin) & 0x1;
>>> +}
>>> +
>>> +static struct at91_pinctrl_mux_ops at91rm9200_ops = {
>>> + .get_periph = at91_mux_get_periph,
>>> + .mux_A_periph = at91_mux_set_A_periph,
>>> + .mux_B_periph = at91_mux_set_B_periph,
>>> + .get_deglitch = at91_mux_get_deglitch,
>>> + .set_deglitch = at91_mux_set_deglitch,
>>> +};
>>> +
>>> +static struct at91_pinctrl_mux_ops at91sam9x5_ops = {
>>> + .get_periph = at91_mux_pio3_get_periph,
>>> + .mux_A_periph = at91_mux_pio3_set_A_periph,
>>> + .mux_B_periph = at91_mux_pio3_set_B_periph,
>>> + .mux_C_periph = at91_mux_pio3_set_C_periph,
>>> + .mux_D_periph = at91_mux_pio3_set_D_periph,
>>> + .get_deglitch = at91_mux_get_deglitch,
>>> + .set_deglitch = at91_mux_pio3_set_deglitch,
>>> + .get_debounce = at91_mux_pio3_get_debounce,
>>> + .set_debounce = at91_mux_pio3_set_debounce,
>>> + .get_pulldown = at91_mux_pio3_get_pulldown,
>>> + .set_pulldown = at91_mux_pio3_set_pulldown,
>>> + .get_schmitt_trig = at91_mux_pio3_get_schmitt_trig,
>>> + .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
>>> +};
>>> +
>>> +static int at91_mux_pin(struct at91_pinctrl *info, unsigned pin, enum at91_mux mux, int use_pullup)
>>> +{
>>> + void __iomem *pio = pin_to_controller(info, pin);
>>> + unsigned mask = pin_to_mask(pin);
>>> +
>>> + if (!info)
>>> + return -EINVAL;
>>> +
>>> + if (!pio)
>>> + return -EINVAL;
>>> +
>>> + at91_mux_disable_interrupt(pio, mask);
>>> +
>>> + switch(mux) {
>>> + case AT91_MUX_GPIO:
>>> + at91_mux_gpio_enable(pio, mask);
>>> + break;
>>> + case AT91_MUX_PERIPH_A:
>>> + info->ops->mux_A_periph(pio, mask);
>>> + break;
>>> + case AT91_MUX_PERIPH_B:
>>> + info->ops->mux_B_periph(pio, mask);
>>> + break;
>>> + case AT91_MUX_PERIPH_C:
>>> + if (!info->ops->mux_C_periph)
>>> + return -EINVAL;
>>> + info->ops->mux_C_periph(pio, mask);
>>> + break;
>>> + case AT91_MUX_PERIPH_D:
>>> + if (!info->ops->mux_D_periph)
>>> + return -EINVAL;
>>> + info->ops->mux_D_periph(pio, mask);
>>> + break;
>>> + }
>>> + if (mux)
>>> + at91_mux_gpio_disable(pio, mask);
>>> +
>>> + if (use_pullup >= 0)
>>> + at91_mux_set_pullup(pio, mask, use_pullup);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static struct of_device_id at91_pinctrl_dt_ids[] = {
>>> + {
>>> + .compatible = "atmel,at91rm9200-pinctrl",
>>> + .data = (unsigned long)&at91rm9200_ops,
>>> + }, {
>>> + .compatible = "atmel,at91sam9x5-pinctrl",
>>> + .data = (unsigned long)&at91sam9x5_ops,
>>> + }, {
>>> + /* sentinel */
>>> + }
>>> +};
>>> +
>>> +static struct at91_pinctrl_mux_ops *at91_pinctrl_get_driver_data(struct device_d *dev)
>>> +{
>>> + struct at91_pinctrl_mux_ops *ops_data = NULL;
>>> + int rc;
>>> +
>>> + if (dev->device_node) {
>>> + const struct of_device_id *match;
>>> + match = of_match_node(at91_pinctrl_dt_ids, dev->device_node);
>>> + if (!match)
>>> + ops_data = NULL;
>>> + else
>>> + ops_data = (struct at91_pinctrl_mux_ops *)match->data;
>>> + }
>>> + else {
>>> + rc = dev_get_drvdata(dev, (unsigned long *)&ops_data);
>>> + if (rc)
>>> + ops_data = NULL;
>>> + }
>>> +
>>> + return ops_data;
>>> +}
>>> +
>>> +static int at91_pinctrl_set_conf(struct at91_pinctrl *info, unsigned int pin_num, unsigned int mux, unsigned int conf)
>>> +{
>>> + unsigned int mask;
>>> + void __iomem *pio;
>>> +
>>> + pio = pin_to_controller(info, pin_num);
>>> + mask = pin_to_mask(pin_num);
>>> +
>>> + if (conf & PULL_UP && conf & PULL_DOWN)
>>> + return -EINVAL;
>>> +
>>> + at91_mux_set_pullup(pio, mask, conf & PULL_UP);
>>> + at91_mux_set_multidrive(pio, mask, conf & MULTI_DRIVE);
>>> + if (info->ops->set_deglitch)
>>> + info->ops->set_deglitch(pio, mask, conf & DEGLITCH);
>>> + if (info->ops->set_debounce)
>>> + info->ops->set_debounce(pio, mask, conf & DEBOUNCE,
>>> + (conf & DEBOUNCE_VAL) >> DEBOUNCE_VAL_SHIFT);
>>> + if (info->ops->set_pulldown)
>>> + info->ops->set_pulldown(pio, mask, conf & PULL_DOWN);
>>> + if (info->ops->disable_schmitt_trig && conf & DIS_SCHMIT)
>>> + info->ops->disable_schmitt_trig(pio, mask);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int at91_pinctrl_set_state(struct pinctrl_device *pdev, struct device_node *np)
>>> +{
>>> + struct at91_pinctrl *info;
>>> + const __be32 *list;
>>> + int i, size;
>>> + int ret = 0;
>>> + int bank_num, pin_num, mux, conf;
>>> +
>>> + info = to_at91_pinctrl(pdev);
>>> +
>>> + list = of_get_property(np, "atmel,pins", &size);
>>> + size /= sizeof(*list);
>>> +
>>> + if (!size || size % 4) {
>>> + dev_err(pdev->dev, "wrong pins number or pins and configs should be by 4\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + for (i = 0; i < size; i += 4) {
>>> + bank_num = be32_to_cpu(*list++);
>>> + pin_num = be32_to_cpu(*list++);
>>> + mux = be32_to_cpu(*list++);
>>> + conf = be32_to_cpu(*list++);
>>> +
>>> + ret = at91_mux_pin(info, pin_num, mux, conf & PULL_UP);
>>> + if (ret) {
>>> + dev_err(pdev->dev, "failed to mux pin %d\n", pin_num);
>>> + return ret;
>>> + }
>>> +
>>> + ret = at91_pinctrl_set_conf(info, pin_num, mux, conf);
>>> + if (ret) {
>>> + dev_err(pdev->dev, "failed to set conf on pin %d\n", pin_num);
>>> + return ret;
>>> + }
>>> + }
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static struct pinctrl_ops at91_pinctrl_ops = {
>>> + .set_state = at91_pinctrl_set_state,
>>> +};
>>> +
>>> +static int at91_pinctrl_probe(struct device_d *dev)
>>> +{
>>> + struct at91_pinctrl *info;
>>> + int ret;
>>> +
>>> + info = xzalloc(sizeof(struct at91_pinctrl));
>>> +
>>> + info->ops = at91_pinctrl_get_driver_data(dev);
>>> + if (!info->ops) {
>>> + dev_err(dev, "failed to retrieve driver data\n");
>>> + return -ENODEV;
>>> + }
>>> +
>>> + info->pctl.dev = dev;
>>> + info->pctl.ops = &at91_pinctrl_ops;
>>> +
>>> + ret = pinctrl_register(&info->pctl);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + dev_info(dev, "AT91 pinctrl registred\n");
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static struct platform_device_id at91_pinctrl_ids[] = {
>>> + {
>>> + .name = "at91rm9200-pinctrl",
>>> + .driver_data = (unsigned long)&at91rm9200_ops,
>>> + }, {
>>> + .name = "at91sam9x5-pinctrl",
>>> + .driver_data = (unsigned long)&at91sam9x5_ops,
>>> + }, {
>>> + /* sentinel */
>>> + },
>>> +};
>>> +
>>> +static struct driver_d at91_pinctrl_driver = {
>>> + .name = "pinctrl-at91",
>>> + .probe = at91_pinctrl_probe,
>>> + .id_table = at91_pinctrl_ids,
>>> + .of_compatible = DRV_OF_COMPAT(at91_pinctrl_dt_ids),
>>> +};
>>> +
>>> +static int at91_pinctrl_init(void)
>>> +{
>>> + return platform_driver_register(&at91_pinctrl_driver);
>>> +}
>>> +coredevice_initcall(at91_pinctrl_init);
>>> +
>>> +static int at91_gpio_get(struct gpio_chip *chip, unsigned offset)
>>> +{
>>> + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
>>> + void __iomem *pio = at91_gpio->regbase;
>>> + unsigned mask = 1 << offset;
>>> +
>>> + return at91_mux_gpio_get(pio, mask);
>>> +}
>>> +
>>> +static void at91_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
>>> +{
>>> + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
>>> + void __iomem *pio = at91_gpio->regbase;
>>> + unsigned mask = 1 << offset;
>>> +
>>> + at91_mux_gpio_set(pio, mask, value);
>>> +}
>>> +
>>> +static int at91_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
>>> + int value)
>>> +{
>>> + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
>>> + void __iomem *pio = at91_gpio->regbase;
>>> + unsigned mask = 1 << offset;
>>> +
>>> + at91_mux_gpio_set(pio, mask, value);
>>> + __raw_writel(mask, pio + PIO_OER);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int at91_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
>>> +{
>>> + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
>>> + void __iomem *pio = at91_gpio->regbase;
>>> + unsigned mask = 1 << offset;
>>> +
>>> + __raw_writel(mask, pio + PIO_ODR);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int at91_gpio_request(struct gpio_chip *chip, unsigned offset)
>>> +{
>>> + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
>>> + void __iomem *pio = at91_gpio->regbase;
>>> + unsigned mask = 1 << offset;
>>> +
>>> + dev_dbg(chip->dev, "%s:%d pio%c%d(%d)\n", __func__, __LINE__,
>>> + 'A' + pin_to_bank(chip->base), offset, chip->base + offset);
>>> + at91_mux_gpio_enable(pio, mask);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static void at91_gpio_free(struct gpio_chip *chip, unsigned offset)
>>> +{
>>> + dev_dbg(chip->dev, "%s:%d pio%c%d(%d)\n", __func__, __LINE__,
>>> + 'A' + pin_to_bank(chip->base), offset, chip->base + offset);
>>> +}
>>> +
>>> +static struct gpio_ops at91_gpio_ops = {
>>> + .request = at91_gpio_request,
>>> + .free = at91_gpio_free,
>>> + .direction_input = at91_gpio_direction_input,
>>> + .direction_output = at91_gpio_direction_output,
>>> + .get = at91_gpio_get,
>>> + .set = at91_gpio_set,
>>> +};
>>> +
>>> +static struct of_device_id at91_gpio_dt_ids[] = {
>>> + {
>>> + .compatible = "atmel,at91rm9200-gpio",
>>> + }, {
>>> + .compatible = "atmel,at91sam9x5-gpio",
>>> + }, {
>>> + /* sentinel */
>>> + },
>>> +};
>>> +
>>> +static int at91_gpio_probe(struct device_d *dev)
>>> +{
>>> + struct at91_gpio_chip *at91_gpio;
>>> + struct clk *clk;
>>> + int ret;
>>> + int alias_idx = of_alias_get_id(dev->device_node, "gpio");
>>> +
>>> + BUG_ON(dev->id > MAX_GPIO_BANKS);
>>> +
>>> + at91_gpio = &gpio_chip[alias_idx];
>>> +
>>> + clk = clk_get(dev, NULL);
>>> + if (IS_ERR(clk)) {
>>> + ret = PTR_ERR(clk);
>>> + dev_err(dev, "clock not found: %d\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + ret = clk_enable(clk);
>>> + if (ret < 0) {
>>> + dev_err(dev, "clock failed to enable: %d\n", ret);
>>> + clk_put(clk);
>>> + return ret;
>>> + }
>>> +
>>> + gpio_banks = max(gpio_banks, alias_idx + 1);
>>> + at91_gpio->regbase = dev_request_mem_region(dev, 0);
>>> +
>>> + at91_gpio->chip.ops = &at91_gpio_ops;
>>> + at91_gpio->chip.ngpio = MAX_NB_GPIO_PER_BANK;
>>> + at91_gpio->chip.dev = dev;
>>> + at91_gpio->chip.base = dev->id * MAX_NB_GPIO_PER_BANK;
>>> +
>>> + ret = gpiochip_add(&at91_gpio->chip);
>>> + if (ret) {
>>> + dev_err(dev, "couldn't add gpiochip, ret = %d\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + dev_info(dev, "AT91 gpio driver registred\n");
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static struct platform_device_id at91_gpio_ids[] = {
>>> + {
>>> + .name = "at91rm9200-gpio",
>>> + }, {
>>> + .name = "at91sam9x5-gpio",
>>> + }, {
>>> + /* sentinel */
>>> + },
>>> +};
>>> +
>>> +static struct driver_d at91_gpio_driver = {
>>> + .name = "gpio-at91",
>>> + .probe = at91_gpio_probe,
>>> + .id_table = at91_gpio_ids,
>>> + .of_compatible = DRV_OF_COMPAT(at91_gpio_dt_ids),
>>> +};
>>> +
>>> +static int at91_gpio_init(void)
>>> +{
>>> + return platform_driver_register(&at91_gpio_driver);
>>> +}
>>> +coredevice_initcall(at91_gpio_init);
>>> diff --git a/drivers/pinctrl/pinctrl-at91.h b/drivers/pinctrl/pinctrl-at91.h
>>> new file mode 100644
>>> index 0000000..e719fb8
>>> --- /dev/null
>>> +++ b/drivers/pinctrl/pinctrl-at91.h
>>> @@ -0,0 +1,148 @@
>>> +/*
>>> + * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
>>> + *
>>> + * Under GPLv2 only
>>> + */
>>> +
>>> +#ifndef __AT91_GPIO_H__
>>> +#define __AT91_GPIO_H__
>>> +
>>> +#ifndef __gpio_init
>>> +#define __gpio_init
>>> +#endif
>>> +
>>> +#define MAX_NB_GPIO_PER_BANK 32
>>> +
>>> +static inline unsigned pin_to_bank(unsigned pin)
>>> +{
>>> + return pin / MAX_NB_GPIO_PER_BANK;
>>> +}
>>> +
>>> +static inline unsigned pin_to_bank_offset(unsigned pin)
>>> +{
>>> + return pin % MAX_NB_GPIO_PER_BANK;
>>> +}
>>> +
>>> +static inline unsigned pin_to_mask(unsigned pin)
>>> +{
>>> + return 1 << pin_to_bank_offset(pin);
>>> +}
>>> +
>>> +static inline void at91_mux_disable_interrupt(void __iomem *pio, unsigned mask)
>>> +{
>>> + __raw_writel(mask, pio + PIO_IDR);
>>> +}
>>> +
>>> +static inline void at91_mux_set_pullup(void __iomem *pio, unsigned mask, bool on)
>>> +{
>>> + __raw_writel(mask, pio + (on ? PIO_PUER : PIO_PUDR));
>>> +}
>>> +
>>> +static inline void at91_mux_set_multidrive(void __iomem *pio, unsigned mask, bool on)
>>> +{
>>> + __raw_writel(mask, pio + (on ? PIO_MDER : PIO_MDDR));
>>> +}
>>> +
>>> +static inline void at91_mux_set_A_periph(void __iomem *pio, unsigned mask)
>>> +{
>>> + __raw_writel(mask, pio + PIO_ASR);
>>> +}
>>> +
>>> +static inline void at91_mux_set_B_periph(void __iomem *pio, unsigned mask)
>>> +{
>>> + __raw_writel(mask, pio + PIO_BSR);
>>> +}
>>> +
>>> +static inline void at91_mux_pio3_set_A_periph(void __iomem *pio, unsigned mask)
>>> +{
>>> +
>>> + __raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask,
>>> + pio + PIO_ABCDSR1);
>>> + __raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask,
>>> + pio + PIO_ABCDSR2);
>>> +}
>>> +
>>> +static inline void at91_mux_pio3_set_B_periph(void __iomem *pio, unsigned mask)
>>> +{
>>> + __raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask,
>>> + pio + PIO_ABCDSR1);
>>> + __raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask,
>>> + pio + PIO_ABCDSR2);
>>> +}
>>> +
>>> +static inline void at91_mux_pio3_set_C_periph(void __iomem *pio, unsigned mask)
>>> +{
>>> + __raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask, pio + PIO_ABCDSR1);
>>> + __raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
>>> +}
>>> +
>>> +static inline void at91_mux_pio3_set_D_periph(void __iomem *pio, unsigned mask)
>>> +{
>>> + __raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask, pio + PIO_ABCDSR1);
>>> + __raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
>>> +}
>>> +
>>> +static inline void at91_mux_set_deglitch(void __iomem *pio, unsigned mask, bool is_on)
>>> +{
>>> + __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
>>> +}
>>> +
>>> +static inline void at91_mux_pio3_set_deglitch(void __iomem *pio, unsigned mask, bool is_on)
>>> +{
>>> + if (is_on)
>>> + __raw_writel(mask, pio + PIO_IFSCDR);
>>> + at91_mux_set_deglitch(pio, mask, is_on);
>>> +}
>>> +
>>> +static inline void at91_mux_pio3_set_debounce(void __iomem *pio, unsigned mask,
>>> + bool is_on, u32 div)
>>> +{
>>> + if (is_on) {
>>> + __raw_writel(mask, pio + PIO_IFSCER);
>>> + __raw_writel(div & PIO_SCDR_DIV, pio + PIO_SCDR);
>>> + __raw_writel(mask, pio + PIO_IFER);
>>> + } else {
>>> + __raw_writel(mask, pio + PIO_IFDR);
>>> + }
>>> +}
>>> +
>>> +static inline void at91_mux_pio3_set_pulldown(void __iomem *pio, unsigned mask, bool is_on)
>>> +{
>>> + __raw_writel(mask, pio + (is_on ? PIO_PPDER : PIO_PPDDR));
>>> +}
>>> +
>>> +static inline void at91_mux_pio3_disable_schmitt_trig(void __iomem *pio, unsigned mask)
>>> +{
>>> + __raw_writel(__raw_readl(pio + PIO_SCHMITT) | mask, pio + PIO_SCHMITT);
>>> +}
>>> +
>>> +static inline void at91_mux_gpio_disable(void __iomem *pio, unsigned mask)
>>> +{
>>> + __raw_writel(mask, pio + PIO_PDR);
>>> +}
>>> +
>>> +static inline void at91_mux_gpio_enable(void __iomem *pio, unsigned mask)
>>> +{
>>> + __raw_writel(mask, pio + PIO_PER);
>>> +}
>>> +
>>> +static inline void at91_mux_gpio_input(void __iomem *pio, unsigned mask, bool input)
>>> +{
>>> + __raw_writel(mask, pio + (input ? PIO_ODR : PIO_OER));
>>> +}
>>> +
>>> +static inline void at91_mux_gpio_set(void __iomem *pio, unsigned mask,
>>> +int value)
>>> +{
>>> + __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
>>> +}
>>> +
>>> +static inline int at91_mux_gpio_get(void __iomem *pio, unsigned mask)
>>> +{
>>> + u32 pdsr;
>>> +
>>> + pdsr = __raw_readl(pio + PIO_PDSR);
>>> + return (pdsr & mask) != 0;
>>> +}
>>> +
>>> +#endif /* __AT91_GPIO_H__ */
>>> --
>>> 1.7.9.5
>>>
>>>
>>> _______________________________________________
>>> barebox mailing list
>>> barebox@lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/barebox
>>
>>
>> _______________________________________________
>> barebox mailing list
>> barebox@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-08-05 10:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-01 13:24 [PATCH 0/2] Add atmel " Raphaël Poggi
2014-08-01 13:24 ` [PATCH 1/2] pinctrl: at91: add " Raphaël Poggi
2014-08-04 18:22 ` Sascha Hauer
2014-08-04 18:26 ` Jean-Christophe PLAGNIOL-VILLARD
2014-08-04 18:37 ` Raphaël Poggi
2014-08-04 18:45 ` Sascha Hauer
2014-08-05 10:26 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2014-08-05 11:38 ` Raphaël Poggi
[not found] ` <E10FE9F3-8D18-4EFC-8470-7C2D79E7E1B4@jcrosoft.com>
[not found] ` <CA5BE09F-18DF-49EE-83D8-65BB761BB903@jcrosoft.com>
2014-08-06 7:12 ` Raphaël Poggi
2014-08-01 13:24 ` [PATCH 2/2] at91sam9g45: add device tree gpio clocks Raphaël Poggi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=39BF03AA-21A6-4950-8208-DF26590A4304@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
--cc=raphio98@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox