From: "Clément Leger" <cleger@kalray.eu>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH v4 0/7] elf: add better bootm support
Date: Sun, 10 May 2020 13:31:31 +0200 (CEST) [thread overview]
Message-ID: <479337908.1774429.1589110291429.JavaMail.zimbra@kalray.eu> (raw)
In-Reply-To: <20200510043141.377gvmlruxwsggrm@pengutronix.de>
Hi Oleksij,
----- On 10 May, 2020, at 06:31, Oleksij Rempel o.rempel@pengutronix.de wrote:
> Hi Clement,
>
> just in case it makes a difference. I load this file over tftp (boot
> net)
I manage to load your elf file on kvx using bootm (I do not have net boot)
and here is what I get:
--------------------------------------------
Board: KONIC 200 (K200)
malloc space: 0x110306050 -> 0x200000000 (size 3.7 GiB)
export: No such file or directory
Hit any to stop autoboot: 3
barebox:/ bootm env/ore-linux-dpt-module
Entry Point: 80980000
Loading ELF 'env/ore-linux-dpt-module'
Loading phdr to 0x0000000080980000 (2740416 bytes)
...
--------------------------------------------
So one segment is loaded which is correct according to readelf.
elf file is correct and can be loaded using bootm.
Could you try loading it using bootm directly ?
This will confirm if it's related to net boot or not (although I don't
know what are the underlying differences).
Thanks,
Clément
>
> On Sat, May 09, 2020 at 09:24:55PM +0200, Clément Leger wrote:
>> Hi Oleksij,
>>
>> ----- On 9 May, 2020, at 18:51, Oleksij Rempel o.rempel@pengutronix.de wrote:
>>
>> > On Sat, May 09, 2020 at 04:51:42PM +0200, Oleksij Rempel wrote:
>> >> Hi Clement,
>> >>
>> >> suddenly it is still exploding. I'll try to investigate the reason.
>> >
>> > common/elf.c:
>> > load_elf_image_phdr()
>> > elf_hdr_e_phnum() <-- returns 0
>> > for (i = 0; i < elf_hdr_e_phnum(elf, buf) ; ++i) {
>> > ... so we will never get here.
>> >
>> > Probably we should add a sanity check here and be more verbose in this
>> > case.
>>
>> There is something odd because your elf is correct and has 2 program
>> headers. So this should not be a problem (but a sanity check makes
>> sense !).
>>
>> I suspect that the elf size computation is wrong with your elf file
>> and leads to incompletely loaded elf file but I tried to compute
>> it using the sequence of code used in barebox and everything seems ok.
>> Maybe there is something with the endianess/elfclass going wrong.
>> I tried again on kvx to be sure I did not made a mistake but it works
>> and the elf entry address is correctly used.
>> I'll try to add handling for different endianess and load your elf
>> file on kvx to debug that.
>>
>> >
>> > here is my elf image:
>> > https://github.com/olerem/barebox/blob/new-elf/ore-linux-dpt-module
>>
>> I succeeded in building Distrokit images but I can't get it under barebox.
>> There is only 4M oof RAM and each time I tries to modify it, it won't boot
>> anymore.
>> I tried integrating the kernel (and your eore-linux-dpt-module elf) in
>> the environment but it also won't boot. Do you have any idea on how to
>> do it ?
>> Even if the kernel won't start under qemu , at least I'll be able to
>> understand what is wrong.
>>
>> Thanks for testing,
>>
>> Clément
>>
>> >
>> >> On Fri, May 08, 2020 at 07:04:04PM +0200, Clement Leger wrote:
>> >> > Currently, when booting an elf file using "bootm /dev/mtdx", bootm will
>> >> > simply pass the file to the bootm and the read done on it will read the
>> >> > entire flash partition. This series starts by some cleanup and then add an
>> >> > elf_open function to load the elf file size only based on the elf header.
>> >> > A special handling for the elf file is also added in bootm data to allow
>> >> > using directly the elf file structure. Finally the mips bootm is modified
>> >> > to use bootm_load_os directly instead of manual elf loading.
>> >> >
>> >> > Compilation for both mips and arm has been tested but run on qemu-malta was not
>> >> > possible. Changing the MALLOC_SIZE to allow loading a kernel always lead to a
>> >> > non-bootable system. Changes have been tested on kvx architecture for which
>> >> > bootm support has been added and will be submitted.
>> >> >
>> >> > Changes v3 -> v4
>> >> > - Fix init of elf entry address to be used by bootm_load_elf
>> >> >
>> >> > Changes v2 -> v3
>> >> > - Integrate elf loading in bootm_load_os
>> >> > - Add patch to remove now unused elf_load_image/elf_release_image
>> >> > - Use malloc instead of xmalloc and check return value
>> >> >
>> >> > Changes v1 -> v2
>> >> > - Add BOOTM_ELF config to select elf support and add checks in code
>> >> > - Add an elf_get_mem_size function to avoid computing elf size in bootm.c
>> >> > - Use xmalloc and read_full in elf_open instead of xzalloc/read
>> >> > - Fix data->elf NULL reset
>> >> > - Remove elf struct entirely from mips bootm code
>> >> >
>> >> > Clement Leger (7):
>> >> > common: elf: add computation of elf boundaries
>> >> > common: elf: fix warning on 32 bits architectures
>> >> > common: elf: split init to be reused from other function
>> >> > common: elf: add elf_open, elf_close and elf_load
>> >> > common: bootm: add support for elf file loading
>> >> > mips: lib: bootm: use bootm elf loading capabilities
>> >> > common: elf: remove elf_load_image/elf_release_image
>> >> >
>> >> > arch/mips/lib/bootm.c | 31 +++++-------
>> >> > common/Kconfig | 8 +++
>> >> > common/bootm.c | 33 +++++++++++++
>> >> > common/elf.c | 111 +++++++++++++++++++++++++++++++++++-------
>> >> > include/bootm.h | 3 ++
>> >> > include/elf.h | 16 +++++-
>> >> > 6 files changed, 163 insertions(+), 39 deletions(-)
>> >> >
>> >> > --
>> >> > 2.17.1
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > barebox mailing list
>> >> > barebox@lists.infradead.org
>> >> > http://lists.infradead.org/mailman/listinfo/barebox
>> >> >
>> >>
>> >> --
>> >> Pengutronix e.K. | |
>> >> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
>> >> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
>> >> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>> >
>> >
>> >
>> > --
>> > Pengutronix e.K. | |
>> > Steuerwalder Str. 21 | http://www.pengutronix.de/ |
>> > 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
>> > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>>
>> _______________________________________________
>> barebox mailing list
>> barebox@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/barebox
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-05-10 11:31 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-08 17:04 Clement Leger
2020-05-08 17:04 ` [PATCH v4 1/7] common: elf: add computation of elf boundaries Clement Leger
2020-05-08 17:04 ` [PATCH v4 2/7] common: elf: fix warning on 32 bits architectures Clement Leger
2020-05-08 17:04 ` [PATCH v4 3/7] common: elf: split init to be reused from other function Clement Leger
2020-05-08 17:04 ` [PATCH v4 4/7] common: elf: add elf_open, elf_close and elf_load Clement Leger
2020-05-08 17:04 ` [PATCH v4 5/7] common: bootm: add support for elf file loading Clement Leger
2020-05-08 17:04 ` [PATCH v4 6/7] mips: lib: bootm: use bootm elf loading capabilities Clement Leger
2020-05-08 17:04 ` [PATCH v4 7/7] common: elf: remove elf_load_image/elf_release_image Clement Leger
2020-05-09 14:51 ` [PATCH v4 0/7] elf: add better bootm support Oleksij Rempel
2020-05-09 16:51 ` Oleksij Rempel
2020-05-09 19:24 ` Clément Leger
2020-05-10 4:31 ` Oleksij Rempel
2020-05-10 11:31 ` Clément Leger [this message]
2020-06-06 10:11 ` Oleksij Rempel
2020-06-06 11:16 ` Clément Leger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=479337908.1774429.1589110291429.JavaMail.zimbra@kalray.eu \
--to=cleger@kalray.eu \
--cc=barebox@lists.infradead.org \
--cc=o.rempel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox