From: "Tyler W. Wilson" <tyler@tylerlabs.com>
To: barebox@lists.infradead.org
Subject: Re: barebox for leopardboard
Date: Fri, 05 Feb 2010 13:58:54 -0400 [thread overview]
Message-ID: <4B6C5C5E.2020208@tylerlabs.com> (raw)
In-Reply-To: <20100205174959.GA18291@pengutronix.de>
On 2/5/2010 1:49 PM, Sascha Hauer wrote:
> Hi Tyler,
>
> On Fri, Feb 05, 2010 at 12:25:28PM -0400, Tyler W. Wilson wrote:
>
>> I am curious if anybody has done any work on getting barebox running on
>> the leopardboard, so I do not reproduce effort.
>>
>> I am especially interested in setting up a bootloader that directly
>> supports USB and DFU, so that I do not need to use the UART/serial port.
>>
> I know nothing about the leopardboard, from googling I found out that
> this is a beagleboard with a camera connected to it, right? Barebox runs
> on the beagleboard, but unfortunately we do not have USB support for it.
> You would have to port the usb driver for it, then DFU should work.
> As a first shot you can compile the beagleboard defconfig and see how
> far you get.
>
> Sascha
>
>
Unfortunately, it is a little different - it uses a DaVinci DM355
processor, which is an ARM9 + custom DSP. The beagleboard uses an OMAP3x
of course. Unfortunately, even I am confused on the TI naming scheme as
to what is an OMAP versus what is a DaVinci.
I will probably do as you suggest - start with the beagleboard configs
and also look at the leopardboard code in the ti u-boot repo. Hopefully
that will give me enough data to get the basic barebox running.
The USB worries me, since I am just familiar enough with it to know how
complex it can be. Time will tell.
Thank you for your input.
Tyler
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2010-02-05 17:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-05 16:25 Tyler W. Wilson
2010-02-05 17:49 ` Sascha Hauer
2010-02-05 17:58 ` Tyler W. Wilson [this message]
2010-02-05 18:20 ` Sascha Hauer
2010-02-05 20:16 ` Anand Gadiyar
2010-02-08 10:41 ` Premi, Sanjeev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B6C5C5E.2020208@tylerlabs.com \
--to=tyler@tylerlabs.com \
--cc=barebox@lists.infradead.org \
--cc=barebox@tylerlabs.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox