From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from h51baff8c.k3918.sta.perspektivbredband.net ([81.186.255.140] helo=fg-dc1.flatfrog.local) by canuck.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1POQh3-00084B-Nv for barebox@lists.infradead.org; Fri, 03 Dec 2010 08:08:38 +0000 Message-ID: <4CF8A582.8080003@flatfrog.com> Date: Fri, 3 Dec 2010 09:08:34 +0100 From: Orjan Friberg MIME-Version: 1.0 References: <4CF7AB25.3010604@flatfrog.com> <4CF7CBD0.7080609@flatfrog.com> <4CF89B06.3070209@flatfrog.com> In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="us-ascii"; Format="flowed" Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: Barebox on a 3730 To: Belisko Marek Cc: "barebox@lists.infradead.org" On 2010-12-03 08:33, Belisko Marek wrote: > Yes clock for UART is also 48Mhz. I think difference is how to setup main clock > which will be then also used for UART. Just quessing you have latest beagleboard > revision which have 3730? The board I'm trying to RAM boot with barebox is our own design, but I'd be happy to try it on a BeagleBoard xM if there's a way (mine is an A2 revision). I'll take a look at arch/arm/mach-omap/omap3_clock.c. Thanks, Orjan -- Orjan Friberg FlatFrog Laboratories AB _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox