From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from aa002msb.fastweb.it ([85.18.95.81]) by canuck.infradead.org with esmtp (Exim 4.72 #1 (Red Hat Linux)) id 1Q9BS1-0003Ua-0U for barebox@lists.infradead.org; Mon, 11 Apr 2011 07:22:22 +0000 Received: from fw.selea.com (89.96.133.2) by aa002msb.fastweb.it (8.5.016.6) id 4D381D770657EB6B for barebox@lists.infradead.org; Mon, 11 Apr 2011 09:22:17 +0200 Received: from [192.168.100.217] (linux-xsj9.selea.lan [192.168.100.217]) by fw.selea.com (Postfix) with ESMTP id 33D5533810E for ; Mon, 11 Apr 2011 09:22:17 +0200 (CEST) Message-ID: <4DA2AC28.3050802@selea.com> Date: Mon, 11 Apr 2011 09:22:16 +0200 From: Omar Pighi MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: imx25 3 stack problem To: barebox@lists.infradead.org Hi, I downloaded the last version of barebox and using the tolchain downloaded from pengutronix (not the last one). i compiled with ARCH=arm and CROSS_COMPILER=.... i configured it with make menuconfig than make put it on the nand flash using the ATK toolkit. try to boot (from NAND flash )but nothing happen.... the hardware is working because if i do the same with the u-boot included with the BSP from freescale it works fine. reading the mailing list a lot of people is using barebox on imx25 , so it is my fault.... but what i can check? to fix it? Thanks Omar -- Dott. Ing. Omar Pighi R&D Selea s.r.l. Via A.Moro 69 46015 Cicognara (MN) ITALY tel +39-0375-889091 fax +39-0375-889080 web:www.selea.com _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox