mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Omar Pighi <pighi@selea.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: "barebox@lists.infradead.org" <barebox@lists.infradead.org>
Subject: Re: again on enviroment and partition problems
Date: Tue, 19 Apr 2011 11:17:08 +0200	[thread overview]
Message-ID: <4DAD5314.3070504@selea.com> (raw)
In-Reply-To: <20110418174845.GO14770@pengutronix.de>

[-- Attachment #1: Type: text/plain, Size: 1964 bytes --]

Hi,

you where right about CONFIG_GLOB... sorry.
and what about the other problem on crc error?
(http://www.spinics.net/lists/u-boot-v2/msg02944.html) is it ok the
correction?

but i have some problem on saving enviroment... I mean if i create a
enviroment variable from command line (i.e. myvar=testvalue) and perorm
saveenv command.
then reset the board.. i should find the variable again (using printenv
i doesn't have it defined)

i tried to modify a scrit in the /env directory (just adding an echo)
then "make" but downloading the new bin... but i cannot see the new init
script .. in the /env/bin directory i still have the old one...

can anybody explain to me the usage of this menuconfig item:

[*] Compile in default environment │ │
│ │ [*] Default environment generic │ │
│ │ (arch/arm/boards/freescale-mx25-3-stack/env/) Default environment path

attached my config file just to understand if i'm doign something wrong
on enviroment usage...

thanks
Omar


Dott. Ing. Omar Pighi
R&D Selea s.r.l.
Via A.Moro 69
46015 Cicognara (MN)
ITALY
tel +39-0375-889091
fax +39-0375-889080
web:www.selea.com


Il 18/04/2011 19:48, Sascha Hauer ha scritto:
> On Mon, Apr 18, 2011 at 05:03:30PM +0200, Omar Pighi wrote:
>   
>> reading here:
>> http://www.spinics.net/lists/u-boot-v2/msg02944.html
>>
>> it seems that now it works and save enviroments with correct crc.
>> but when i triy to ypdate_kernel it says_
>> partition dev/nand0.kernel.bb not found... no one .bb partition has been
>> created.
>> it should be done by hush_hack but it doesn't.
>>
>> reading here:
>> http://www.spinics.net/lists/u-boot-v2/msg02957.html
>>
>> but "CONFIG_GLOB=y"
>>
>> I cannot find it in any kconfig file... so it is not possible to set
>> using menuconfig... should i add by hand. this means something missin in
>> the kconfigs...
>>     
> CONFIG_GLOB depends on CONFIG_SHELL_HUSH. Could it be that hush is not 
> enabled in you config?
>
> Sascha
>
>   

[-- Attachment #2: auto.conf --]
[-- Type: text/plain, Size: 2837 bytes --]

#
# Automatically generated make config: don't edit
# Linux/arm 2011.04.0 Barebox Configuration
# Tue Apr 19 09:55:24 2011
#
CONFIG_CRC32=y
CONFIG_CMD_BOOTM=y
CONFIG_ARCH_IMX_INTERNAL_BOOT=y
CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/freescale-mx25-3-stack/env/"
CONFIG_I2C_IMX=y
CONFIG_GLOB=y
CONFIG_CMD_CD=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
CONFIG_ZLIB=y
CONFIG_CMD_DEVINFO=y
CONFIG_CMD_FALSE=y
CONFIG_DYNAMIC_CRC_TABLE=y
CONFIG_DEFAULT_ENVIRONMENT=y
CONFIG_HAS_CFI=y
CONFIG_CMD_EXPORT=y
CONFIG_CMD_CP=y
CONFIG_NAND_IMX=y
CONFIG_NET_DHCP=y
CONFIG_MTD=y
CONFIG_SHELL_HUSH=y
CONFIG_MTD_NAND_IDS=y
CONFIG_CMD_CRC_CMP=y
CONFIG_CMD_ARM_CPUINFO=y
CONFIG_SIMPLE_READLINE=y
CONFIG_CMD_PARTITION=y
CONFIG_DRIVER_NET_FEC_IMX=y
CONFIG_ARM=y
CONFIG_MAXARGS=16
CONFIG_GENERIC_GPIO=y
CONFIG_PARTITION=y
CONFIG_CMD_HELP=y
CONFIG_ENABLE_DEVICE_NOISE=y
CONFIG_CMD_CRC=y
CONFIG_CMD_SAVEENV=y
CONFIG_CMD_TRUE=y
CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y
CONFIG_CMD_FLASH=y
CONFIG_ARCH_IMX25=y
CONFIG_CMD_TEST=y
CONFIG_CMD_LOADENV=y
CONFIG_CMD_MKDIR=y
CONFIG_TEXT_BASE=0x83f00000
CONFIG_I2C_MC34704=y
CONFIG_CPU_ARM926T=y
CONFIG_STACK_SIZE=0x8000
CONFIG_CPU_32=y
CONFIG_ENABLE_PARTITION_NOISE=y
CONFIG_PROCESS_ESCAPE_SEQUENCE=y
CONFIG_ERRNO_MESSAGES=y
CONFIG_ARCH_TEXT_BASE=0x83f00000
CONFIG_NET_TFTP=y
CONFIG_CPU_32v5=y
CONFIG_BZLIB=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_CMD_RESET=y
CONFIG_GREGORIAN_CALENDER=y
CONFIG_HAVE_CONFIGURABLE_MEMORY_LAYOUT=y
CONFIG_CMD_PWD=y
CONFIG_ARCH_IMX=y
CONFIG_MIIDEV=y
CONFIG_I2C=y
CONFIG_ENV_HANDLING=y
CONFIG_CMD_CLEAR=y
CONFIG_NET_NFS=y
CONFIG_NAND=y
CONFIG_NET=y
CONFIG_ARCH_HAS_FEC_IMX=y
CONFIG_ARCH_IMX_INTERNAL_BOOT_NAND=y
CONFIG_CMD_BOOTM_BZLIB=y
CONFIG_MALLOC_SIZE=0x400000
CONFIG_CMD_GO=y
CONFIG_GENERIC_LINKER_SCRIPT=y
CONFIG_ENABLE_FLASH_NOISE=y
CONFIG_CMD_BOOTU=y
CONFIG_CMD_VERSION=y
CONFIG_NET_PING=y
CONFIG_CMD_BOOTM_SHOW_TYPE=y
CONFIG_HAS_KALLSYMS=y
CONFIG_CMD_UMOUNT=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_MEMORY=y
CONFIG_CMD_BOOTZ=y
CONFIG_MACH_HAS_LOWLEVEL_INIT=y
CONFIG_CMD_ECHO=y
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAS_MODULES=y
CONFIG_CMD_CAT=y
CONFIG_CMD_PRINTENV=y
CONFIG_CMD_LS=y
CONFIG_CMD_RM=y
CONFIG_CONSOLE_FULL=y
CONFIG_BAUDRATE=115200
CONFIG_MACH_DO_LOWLEVEL_INIT=y
CONFIG_BOARDINFO="Freescale MX25 3Stack"
CONFIG_CONSOLE_ACTIVATE_FIRST=y
CONFIG_TIMESTAMP=y
CONFIG_FREESCALE_MX25_3STACK_SDRAM_64MB_DDR2=y
CONFIG_FS_DEVFS=y
CONFIG_CBSIZE=1024
CONFIG_HUSH_GETOPT=y
CONFIG_CMD_MOUNT=y
CONFIG_FS_CRAMFS=y
CONFIG_PROMPT_HUSH_PS2="> "
CONFIG_MACH_FREESCALE_MX25_3STACK=y
CONFIG_IMX_CLKO=y
CONFIG_CMD_EDIT=y
CONFIG_NET_NETCONSOLE=y
CONFIG_CMD_ECHO_E=y
CONFIG_FS_RAMFS=y
CONFIG_MEMORY_LAYOUT_DEFAULT=y
CONFIG_PROMPT="barebox:"
CONFIG_CMD_BOOTM_ZLIB=y
CONFIG_CMD_MEMINFO=y
CONFIG_DRIVER_SERIAL_IMX=y
CONFIG_LONGHELP=y
CONFIG_CMD_RMDIR=y
CONFIG_DEBUG_INFO=y

[-- Attachment #3: Type: text/plain, Size: 149 bytes --]

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2011-04-19  9:17 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-16 18:14 Imx51 processor hangs when we do an md 0xf0000000 (memory display) in u-boot Greg Topmiller
2011-04-18  7:29 ` Sascha Hauer
2011-04-18  9:44   ` Greg Topmiller
2011-04-18 13:15     ` on enviromen Omar Pighi
2011-04-18 15:03   ` again on enviroment and partition problems Omar Pighi
2011-04-18 17:48     ` Sascha Hauer
2011-04-19  9:17       ` Omar Pighi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4DAD5314.3070504@selea.com \
    --to=pighi@selea.com \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox