Hello Plumbedzero,
Here is what I did:

make omap3530_beagle_defconfig
make ARCH=arm CROSS_COMPILE=arm-poky-linux-gnueabi-

I use a 32MB SD card formatted for FAT.

As per documentation,
I copied the file MLO, barebox.bin as u-boot.bin and normal.scr as 
boot.scr (not used yet) on the SD card.



Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24)
Reading boot sector
Loading u-boot.bin from mmc


barebox 2011.08.0 (Aug 31 2011 - 14:07:34)

Board: Texas Instrument's Beagle
I2C probe
i2c-omap@i2c-omap0: bus 0 rev3.12 at 100 kHz
ehci@ehci0: USB EHCI 1.00
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 
1,8V 16-bit)
Malloc space: 0x80c00000 -> 0x81000000 (size  4 MB)
Stack space : 0x80bf8000 -> 0x80c00000 (size 32 kB)
Open /dev/env0 No such file or directory
no valid environment found on /dev/env0. Using default environment
running /env/bin/init...
sh: No such file or directory

Hit any key to stop autoboot: Usage: timeout [OPTION]... <timeout>
Wait <timeout> seconds for a timeout. Return 1 if the user intervented
or 0 if a timeout occured
   -a  interrupt on any key
   -c  interrupt on ctrl-c
   -r  interrupt on return
   -s  silent mode



On 01/09/11 15:08, plumbedZero c wrote:
> Hi Renaud,
>
> Sorry for mailing you but I couldn't stop myself writing to you. I 
> have struggled a lot to compile barebox for beagleboard and it 
> compiled, however I am not able to load it as I don't get any boot 
> prompt after loading it to beagle board.
>
> Can you share the process of compilation and if configuration file 
> required.
>
> Also I would be interested in the Hello World program. In case if you 
> are able to make it then let me know as well. Hope you dont mind my 
> multiple requests.
>
>
> Thanks
>
> On Wed, Aug 31, 2011 at 8:50 AM, Renaud Barbier <renaud.barbier@ge.com 
> <mailto:renaud.barbier@ge.com>> wrote:
>
>     Hello,
>     I just loaded barebox on a beagle board and I am experimenting
>     with it.
>
>     I was wondering how I could load and execute a simple hello world
>     program.
>
>     It looks like I would have to use a module.
>
>     Could somebody give me some pointers?
>
>     Cheers,
>     Renaud
>
>     _______________________________________________
>     barebox mailing list
>     barebox@lists.infradead.org <mailto:barebox@lists.infradead.org>
>     http://lists.infradead.org/mailman/listinfo/barebox
>
>

-- 
Renaud Barbier
14, Links Place
3/2 great Michael House
Edinburgh, EH67EN
Tel: +44 131 561 3532