* Hello world
@ 2011-08-31 15:50 Renaud Barbier
[not found] ` <CAC2XfkW=6QG8hFLv01b0GdFeZ=RNJ9=g8iEfirUj0Masp66qMw@mail.gmail.com>
0 siblings, 1 reply; 3+ messages in thread
From: Renaud Barbier @ 2011-08-31 15:50 UTC (permalink / raw)
To: barebox
Hello,
I just loaded barebox on a beagle board and I am experimenting with it.
I was wondering how I could load and execute a simple hello world program.
It looks like I would have to use a module.
Could somebody give me some pointers?
Cheers,
Renaud
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread[parent not found: <CAC2XfkW=6QG8hFLv01b0GdFeZ=RNJ9=g8iEfirUj0Masp66qMw@mail.gmail.com>]
* Re: Hello world [not found] ` <CAC2XfkW=6QG8hFLv01b0GdFeZ=RNJ9=g8iEfirUj0Masp66qMw@mail.gmail.com> @ 2011-09-02 11:10 ` Renaud Barbier 2011-09-02 15:56 ` Shakil 0 siblings, 1 reply; 3+ messages in thread From: Renaud Barbier @ 2011-09-02 11:10 UTC (permalink / raw) To: plumbedZero c, barebox [-- Attachment #1.1: Type: text/plain, Size: 2501 bytes --] Hello Plumbedzero, Here is what I did: make omap3530_beagle_defconfig make ARCH=arm CROSS_COMPILE=arm-poky-linux-gnueabi- I use a 32MB SD card formatted for FAT. As per documentation, I copied the file MLO, barebox.bin as u-boot.bin and normal.scr as boot.scr (not used yet) on the SD card. Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24) Reading boot sector Loading u-boot.bin from mmc barebox 2011.08.0 (Aug 31 2011 - 14:07:34) Board: Texas Instrument's Beagle I2C probe i2c-omap@i2c-omap0: bus 0 rev3.12 at 100 kHz ehci@ehci0: USB EHCI 1.00 NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit) Malloc space: 0x80c00000 -> 0x81000000 (size 4 MB) Stack space : 0x80bf8000 -> 0x80c00000 (size 32 kB) Open /dev/env0 No such file or directory no valid environment found on /dev/env0. Using default environment running /env/bin/init... sh: No such file or directory Hit any key to stop autoboot: Usage: timeout [OPTION]... <timeout> Wait <timeout> seconds for a timeout. Return 1 if the user intervented or 0 if a timeout occured -a interrupt on any key -c interrupt on ctrl-c -r interrupt on return -s silent mode On 01/09/11 15:08, plumbedZero c wrote: > Hi Renaud, > > Sorry for mailing you but I couldn't stop myself writing to you. I > have struggled a lot to compile barebox for beagleboard and it > compiled, however I am not able to load it as I don't get any boot > prompt after loading it to beagle board. > > Can you share the process of compilation and if configuration file > required. > > Also I would be interested in the Hello World program. In case if you > are able to make it then let me know as well. Hope you dont mind my > multiple requests. > > > Thanks > > On Wed, Aug 31, 2011 at 8:50 AM, Renaud Barbier <renaud.barbier@ge.com > <mailto:renaud.barbier@ge.com>> wrote: > > Hello, > I just loaded barebox on a beagle board and I am experimenting > with it. > > I was wondering how I could load and execute a simple hello world > program. > > It looks like I would have to use a module. > > Could somebody give me some pointers? > > Cheers, > Renaud > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org <mailto:barebox@lists.infradead.org> > http://lists.infradead.org/mailman/listinfo/barebox > > -- Renaud Barbier 14, Links Place 3/2 great Michael House Edinburgh, EH67EN Tel: +44 131 561 3532 [-- Attachment #1.2: Type: text/html, Size: 4011 bytes --] [-- Attachment #2: Type: text/plain, Size: 149 bytes --] _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Hello world 2011-09-02 11:10 ` Renaud Barbier @ 2011-09-02 15:56 ` Shakil 0 siblings, 0 replies; 3+ messages in thread From: Shakil @ 2011-09-02 15:56 UTC (permalink / raw) To: Renaud Barbier; +Cc: barebox [-- Attachment #1.1: Type: text/plain, Size: 2832 bytes --] Thanks Renaud, for the instruction. I will try this over weekend and will get back to you if I am having any problem. Appreciate your response. Regards Shakil On 9/2/2011 4:10 AM, Renaud Barbier wrote: > Hello Plumbedzero, > Here is what I did: > > make omap3530_beagle_defconfig > make ARCH=arm CROSS_COMPILE=arm-poky-linux-gnueabi- > > I use a 32MB SD card formatted for FAT. > > As per documentation, > I copied the file MLO, barebox.bin as u-boot.bin and normal.scr as > boot.scr (not used yet) on the SD card. > > > > Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24) > Reading boot sector > Loading u-boot.bin from mmc > > > barebox 2011.08.0 (Aug 31 2011 - 14:07:34) > > Board: Texas Instrument's Beagle > I2C probe > i2c-omap@i2c-omap0: bus 0 rev3.12 at 100 kHz > ehci@ehci0: USB EHCI 1.00 > NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB > 1,8V 16-bit) > Malloc space: 0x80c00000 -> 0x81000000 (size 4 MB) > Stack space : 0x80bf8000 -> 0x80c00000 (size 32 kB) > Open /dev/env0 No such file or directory > no valid environment found on /dev/env0. Using default environment > running /env/bin/init... > sh: No such file or directory > > Hit any key to stop autoboot: Usage: timeout [OPTION]... <timeout> > Wait <timeout> seconds for a timeout. Return 1 if the user intervented > or 0 if a timeout occured > -a interrupt on any key > -c interrupt on ctrl-c > -r interrupt on return > -s silent mode > > > > On 01/09/11 15:08, plumbedZero c wrote: >> Hi Renaud, >> >> Sorry for mailing you but I couldn't stop myself writing to you. I >> have struggled a lot to compile barebox for beagleboard and it >> compiled, however I am not able to load it as I don't get any boot >> prompt after loading it to beagle board. >> >> Can you share the process of compilation and if configuration file >> required. >> >> Also I would be interested in the Hello World program. In case if you >> are able to make it then let me know as well. Hope you dont mind my >> multiple requests. >> >> >> Thanks >> >> On Wed, Aug 31, 2011 at 8:50 AM, Renaud Barbier >> <renaud.barbier@ge.com <mailto:renaud.barbier@ge.com>> wrote: >> >> Hello, >> I just loaded barebox on a beagle board and I am experimenting >> with it. >> >> I was wondering how I could load and execute a simple hello world >> program. >> >> It looks like I would have to use a module. >> >> Could somebody give me some pointers? >> >> Cheers, >> Renaud >> >> _______________________________________________ >> barebox mailing list >> barebox@lists.infradead.org <mailto:barebox@lists.infradead.org> >> http://lists.infradead.org/mailman/listinfo/barebox >> >> > > -- > Renaud Barbier > 14, Links Place > 3/2 great Michael House > Edinburgh, EH67EN > Tel: +44 131 561 3532 [-- Attachment #1.2: Type: text/html, Size: 4755 bytes --] [-- Attachment #2: Type: text/plain, Size: 149 bytes --] _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-09-02 16:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-31 15:50 Hello world Renaud Barbier
[not found] ` <CAC2XfkW=6QG8hFLv01b0GdFeZ=RNJ9=g8iEfirUj0Masp66qMw@mail.gmail.com>
2011-09-02 11:10 ` Renaud Barbier
2011-09-02 15:56 ` Shakil
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox