From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 9/9] arm/mach-pxa: add mioa701 board
Date: Thu, 24 Nov 2011 10:13:50 +0100 [thread overview]
Message-ID: <4ECE0ACE.2070103@pengutronix.de> (raw)
In-Reply-To: <1322103764-6265-10-git-send-email-robert.jarzmik@free.fr>
[-- Attachment #1.1: Type: text/plain, Size: 26170 bytes --]
On 11/24/2011 04:02 AM, Robert Jarzmik wrote:
> Add Mitac MioA701 board initial support.
> The support only provides basic boot and a console over USB
> (serial gadget).
Please remove the address of the FSF in the header of the files, please
fix you (C), we don't have 2012 yet :)
some more comments inline
Marc
>
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
> ---
> Makefile | 4 +-
> arch/arm/Makefile | 1 +
> arch/arm/boards/mioa701/Makefile | 2 +
> arch/arm/boards/mioa701/board.c | 251 +++++++++++++++++++++++++++++++
> arch/arm/boards/mioa701/config.h | 207 +++++++++++++++++++++++++
> arch/arm/boards/mioa701/env/bin/init | 13 ++
> arch/arm/boards/mioa701/env/config | 4 +
> arch/arm/boards/mioa701/lowlevel_init.S | 46 ++++++
> arch/arm/boards/mioa701/mioa701.h | 86 +++++++++++
> arch/arm/mach-pxa/Kconfig | 9 +
> arch/arm/mach-pxa/Makefile | 1 +
> 11 files changed, 622 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/boards/mioa701/Makefile
> create mode 100644 arch/arm/boards/mioa701/board.c
> create mode 100644 arch/arm/boards/mioa701/config.h
> create mode 100644 arch/arm/boards/mioa701/env/bin/init
> create mode 100644 arch/arm/boards/mioa701/env/config
> create mode 100644 arch/arm/boards/mioa701/lowlevel_init.S
> create mode 100644 arch/arm/boards/mioa701/mioa701.h
>
> diff --git a/Makefile b/Makefile
> index 1d1e50d..7e94d37 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -163,8 +163,8 @@ export srctree objtree VPATH
> # Alternatively CROSS_COMPILE can be set in the environment.
> # Default value for CROSS_COMPILE is not to prefix executables
>
> -ARCH ?= sandbox
> -CROSS_COMPILE ?=
> +ARCH ?= arm
> +CROSS_COMPILE ?= /home/rj/mio_linux/arm-2007q1/bin/arm-none-eabi-
Please remove that hunk :)
>
> # Architecture as present in compile.h
> UTS_MACHINE := $(ARCH)
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 913a90e..ae1e0fc 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -82,6 +82,7 @@ board-$(CONFIG_MACH_FREESCALE_MX25_3STACK) := freescale-mx25-3-stack
> board-$(CONFIG_MACH_FREESCALE_MX35_3STACK) := freescale-mx35-3-stack
> board-$(CONFIG_MACH_IMX21ADS) := imx21ads
> board-$(CONFIG_MACH_IMX27ADS) := imx27ads
> +board-$(CONFIG_MACH_MIOA701) := mioa701
> board-$(CONFIG_MACH_MMCCPU) := mmccpu
> board-$(CONFIG_MACH_MX1ADS) := mx1ads
> board-$(CONFIG_MACH_NOMADIK_8815NHK) := nhk8815
> diff --git a/arch/arm/boards/mioa701/Makefile b/arch/arm/boards/mioa701/Makefile
> new file mode 100644
> index 0000000..b823b62
> --- /dev/null
> +++ b/arch/arm/boards/mioa701/Makefile
> @@ -0,0 +1,2 @@
> +obj-y += lowlevel_init.o
> +obj-y += board.o
> diff --git a/arch/arm/boards/mioa701/board.c b/arch/arm/boards/mioa701/board.c
> new file mode 100644
> index 0000000..b6af2d1
> --- /dev/null
> +++ b/arch/arm/boards/mioa701/board.c
> @@ -0,0 +1,251 @@
> +/*
> + * (C) 2012 Robert Jarzmik <robert.jarzmik@free.fr>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
Please remove the section with the address, the FSF tends to move ;)
> + *
> + */
> +
> +#include <common.h>
> +#include <driver.h>
> +#include <environment.h>
> +#include <fs.h>
> +#include <init.h>
> +#include <partition.h>
> +#include <led.h>
> +#include <gpio.h>
> +
> +#include <mach/devices.h>
> +#include <mach/mfp-pxa27x.h>
> +#include <mach/pxa-regs.h>
> +#include <mach/udc_pxa2xx.h>
> +
> +#include <asm/armlinux.h>
> +#include <asm/io.h>
> +#include <generated/mach-types.h>
> +#include <asm/mmu.h>
> +
> +#include "mioa701.h"
> +
> +/*
> + * LTM0305A776C LCD panel timings
> + *
> + * see:
> + * - the LTM0305A776C datasheet,
> + * - and the PXA27x Programmers' manual
> + */
> +static struct pxafb_videomode mioa701_ltm0305a776c = {
> + {
> + .pixclock = 220000, /* CLK=4.545 MHz */
> + .xres = 240,
> + .yres = 320,
> + .hsync_len = 4,
> + .vsync_len = 2,
> + .left_margin = 6,
> + .right_margin = 4,
> + .upper_margin = 5,
> + .lower_margin = 3,
> + },
> + .bpp = 16,
> +};
> +
> +static void mioa701_lcd_power(int on)
> +{
> + gpio_set_value(GPIO87_LCD_POWER, on);
> +}
> +
> +static struct pxafb_platform_data mioa701_pxafb_info = {
> + .mode = &mioa701_ltm0305a776c,
> + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
> + .lcd_power = mioa701_lcd_power,
> +};
> +
> +#define MIO_LED(_name, _gpio) \
> + { .gpio = _gpio, .active_low = 1, .led = { .name = #_name, } }
> +static struct gpio_led leds[] = {
> + MIO_LED(charging, GPIO10_LED_nCharging),
> + MIO_LED(blue, GPIO97_LED_nBlue),
> + MIO_LED(orange, GPIO98_LED_nOrange),
> + MIO_LED(vibra, GPIO82_LED_nVibra),
> + MIO_LED(keyboard, GPIO115_LED_nKeyboard),
> +};
> +
> +
> +static int is_usb_connected(void)
> +{
> + return !gpio_get_value(GPIO13_nUSB_DETECT);
> +}
> +
> +static struct pxa2xx_udc_mach_info mioa701_udc_info = {
> + .udc_is_connected = is_usb_connected,
> + .gpio_pullup = GPIO22_USB_ENABLE,
> +};
> +
> +static struct resource mioa701_udc_ress = {
> + .start = 0x40600000,
> + .size = 1024,
> + .flags = IORESOURCE_MEM,
> +};
> +
> +static struct device_d udc_device = {
> + .name = "pxa27x-udc",
> + .resource = &mioa701_udc_ress,
> + .num_resources = 1,
> + .platform_data = &mioa701_udc_info,
> +};
> +
> +static int mioa701_devices_init(void)
> +{
> + int i;
> +
> + pxa_add_fb((void *)0x44000000, &mioa701_pxafb_info);
> +
> + arm_add_mem_device("ram0", 0xa0000000, 64 * 1024 * 1024);
> + armlinux_set_bootparams((void *)0xa0000100);
> + armlinux_set_architecture(MACH_TYPE_MIOA701);
> +
> + for (i = 0; i < ARRAY_SIZE(leds); i++)
> + led_gpio_register(&leds[i]);
> + register_device(&udc_device);
> + return 0;
> +}
> +
> +device_initcall(mioa701_devices_init);
> +
> +static unsigned long mioa701_pin_config[] = {
> + /* Mio global */
> + MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
> + MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
> + MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
> + MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
> + MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
> +
> + /* Backlight PWM 0 */
> + GPIO16_PWM0_OUT,
> +
> + /* MMC */
> + GPIO32_MMC_CLK,
> + GPIO92_MMC_DAT_0,
> + GPIO109_MMC_DAT_1,
> + GPIO110_MMC_DAT_2,
> + GPIO111_MMC_DAT_3,
> + GPIO112_MMC_CMD,
> + MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
> + MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
> + MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
> +
> + /* USB */
> + MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
> + MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
> +
> + /* QCI */
> + GPIO12_CIF_DD_7,
> + GPIO17_CIF_DD_6,
> + GPIO50_CIF_DD_3,
> + GPIO51_CIF_DD_2,
> + GPIO52_CIF_DD_4,
> + GPIO53_CIF_MCLK,
> + GPIO54_CIF_PCLK,
> + GPIO55_CIF_DD_1,
> + GPIO81_CIF_DD_0,
> + GPIO82_CIF_DD_5,
> + GPIO84_CIF_FV,
> + GPIO85_CIF_LV,
> +
> + /* Bluetooth */
> + MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
> + GPIO44_BTUART_CTS,
> + GPIO42_BTUART_RXD,
> + GPIO45_BTUART_RTS,
> + GPIO43_BTUART_TXD,
> + MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
> + MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
> + MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
> +
> + /* GPS */
> + MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
> + MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
> + MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
> + MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
> + MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
> + GPIO46_STUART_RXD,
> + GPIO47_STUART_TXD,
> +
> + /* GSM */
> + MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
> + MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
> + MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
> + MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
> + MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
> + MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
> + GPIO34_FFUART_RXD,
> + GPIO35_FFUART_CTS,
> + GPIO36_FFUART_DCD,
> + GPIO37_FFUART_DSR,
> + GPIO39_FFUART_TXD,
> + GPIO40_FFUART_DTR,
> + GPIO41_FFUART_RTS,
> +
> + /* Sound */
> + GPIO28_AC97_BITCLK,
> + GPIO29_AC97_SDATA_IN_0,
> + GPIO30_AC97_SDATA_OUT,
> + GPIO31_AC97_SYNC,
> + GPIO89_AC97_SYSCLK,
> + MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
> +
> + /* Leds */
> + MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
> + MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
> + MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
> + MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
> + MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
> +
> + /* Keyboard */
> + MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
> + MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
> + MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
> + GPIO100_KP_MKIN_0,
> + GPIO101_KP_MKIN_1,
> + GPIO102_KP_MKIN_2,
> + GPIO103_KP_MKOUT_0,
> + GPIO104_KP_MKOUT_1,
> + GPIO105_KP_MKOUT_2,
> +
> + /* I2C */
> + GPIO117_I2C_SCL,
> + GPIO118_I2C_SDA,
> +
> + /* Unknown */
> + MFP_CFG_IN(GPIO20, AF0),
> + MFP_CFG_IN(GPIO21, AF0),
> + MFP_CFG_IN(GPIO33, AF0),
> + MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
> + MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
> + MFP_CFG_IN(GPIO96, AF0),
> + MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
> +};
> +
> +static int mioa701_coredevice_init(void)
> +{
> + /* route pins */
> + pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
> +
> + return 0;
> +}
> +coredevice_initcall(mioa701_coredevice_init);
> diff --git a/arch/arm/boards/mioa701/config.h b/arch/arm/boards/mioa701/config.h
> new file mode 100644
> index 0000000..0b50067
> --- /dev/null
> +++ b/arch/arm/boards/mioa701/config.h
> @@ -0,0 +1,207 @@
> +/*
> + * (C) 2012 Robert Jarzmik <robert.jarzmik@free.fr>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
dito
> + *
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +/*********************************************************************
> + * CONFIG PXA270 GPIO settings *
> + *********************************************************************/
> +
> +#define GPSR0_DFT 0x00800200
> +#define GPSR1_DFT 0x03020000
> +#define GPSR2_DFT 0x00000000
> +#define GPSR3_DFT 0x001c0006
> +
> +#define GPCR0_DFT 0x0d2d8000
> +#define GPCR1_DFT 0x00002300
> +#define GPCR2_DFT 0x08c80000
> +#define GPCR3_DFT 0x01800c00
> +
> +#define GPDR0_DFT 0x00000000
> +#define GPDR1_DFT 0xff22ab81
> +#define GPDR2_DFT 0x8ffc3fff
> +#define GPDR3_DFT 0x00014000
> +
> +#define GAFR0_L_DFT 0x00000000
> +#define GAFR0_U_DFT 0x00000000
> +#define GAFR1_L_DFT 0x00900550
> +#define GAFR1_U_DFT 0x00000000
> +#define GAFR2_L_DFT 0x000a8000
> +#define GAFR2_U_DFT 0x00000000
> +#define GAFR3_L_DFT 0x00000000
> +#define GAFR3_U_DFT 0x00000000
> +
> +
> +/*
> + * Power Manager Sleep Status Register (PSSR)
> + *
> + * [6] = 0 OTG pad is not holding it's state
> + * [5] = 1 Read Disable Hold: receivers of all gpio pins are disabled
> + * [4] = 1 gpio pins are held in their sleep mode state
> + * [3] = 0 The processor has not been placed in standby mode by
> + * configuring the PWRMODE register since STS was cleared
> + * by a reset or by software.
> + * [2] = 0 nVDD_FAULT has been asserted and caused the processor to
> + * enter deep-sleep mode.
> + * [1] = 1 nBATT_FAULT has been asserted and caused the processor to
> + * enter deep-sleep mode.
> + * [0] = 1 The processor was placed in sleep mode by configuring the
> + * PWRMODE register.
> + */
> +
> +#define CONFIG_PSSR_VAL 0x33
> +
> +
> +/*********************************************************************
> + * CONFIG PXA270 Chipselect settings *
> + *********************************************************************/
> +
> +/*
> + * Memory settings
> + *
> + * This is the configuration for nCS1/0 -> nothing / flash
> + * configuration for nCS1: nothing
> + * [31] 0 - Slower Device
> + * [30:28] 111 - CS deselect to CS time: 7*(2*MemClk) = 20 ns
> + * [27:24] 1111 - Address to data valid in bursts: (30+1)*MemClk = 30 ns
> + * [23:20] 1111 - " for first access: (30+2)*MemClk = 130 ns
> + * [19] 0 - 32 Bit bus width
> + * [18:16] 000 - burst RAM or FLASH
> + * configuration for nCS0 (DocG3 Flash floor 0):
> + * [15] 0 - Slower Device
> + * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 20 ns
> + * [11:08] 1101 - Address to data valid in bursts: (20+1)*MemClk = xx ns
> + * [07:04] 1101 - " for first access: (20-1)*MemClk = xx ns
> + * [03] 1 - 16 Bit bus width
> + * [02:00] 000 - synchronous FLASH
> + */
> +#define CONFIG_MSC0_VAL 0x7ff02dd8
> +
> +/*
> + * This is the configuration for nCS3/2
> + * configuration for nCS3: nothing
> + * configuration for nCS2: nothing
> + */
> +#define CONFIG_MSC1_VAL 0x00000000
> +
> +/*
> + * This is the configuration for nCS5/4
> + * configuration for nCS5: nothing
> + * configuration for nCS4: nothing
> + */
> +#define CONFIG_MSC2_VAL 0x00000000
> +
> +/*********************************************************************
> + * CONFIG PXA270 SDRAM settings *
> + *********************************************************************/
> +
> +#define CONFIG_DRAM_BASE 0xa0000000
> +
> +
> +/* MDCNFG: SDRAM Configuration Register
> + *
> + * [31] 0 - Memory map 0/1 (normal 256MBytes/large 1GBytes)
> + * [30] 0 - dcacx2
> + * [29] 0 - reserved
> + * [28] 0 - SA1111 compatiblity mode
> + * [27] 0 - latch return data with return clock
> + * [26] 0 - alternate addressing for pair 2/3
> + * [25:24] 00 - timings
> + * [23] 0 - internal banks in lower partition 2/3 (not used)
> + * [22:21] 00 - row address bits for partition 2/3 (not used)
> + * [20:19] 00 - column address bits for partition 2/3 (not used)
> + * [18] 0 - SDRAM partition 2/3 width is 32 bit
> + * [17] 0 - SDRAM partition 3 disabled
> + * [16] 0 - SDRAM partition 2 disabled
> + * [15] 0 - Stack1
> + * [14] 0 - dcacx0
> + * [13] 0 - Stack0
> + * [12] 0 - SA1110 compatiblity mode
> + * [11] 1 - always 1
> + * [10] 0 - no alternate addressing for pair 0/1
> + * [09:08] 11 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk RJK
> + * [7] 1 - 4 internal banks in partitions 0/1
> + * [06:05] 10 - 13 row address bits for partition 0/1
> + * [04:03] 10 - 10 column address bits for partition 0/1
> + * [02] 1 - SDRAM partition 0/1 width is 32 bit
> + * [01] 0 - disable SDRAM partition 1
> + * [00] 1 - enable SDRAM partition 0
> + *
> + * Configuration is for 1 bank of 64MBytes (13 rows * 10 cols)
> + * in bank0, of width 32bits
> + */
> +#define CONFIG_MDCNFG_VAL 0x00000bd5
> +
> +/* MDREFR: SDRAM Refresh Control Register
> + *
> + * [31] 0 - ALTREFA
> + * [30] 0 - ALTREFB
> + * [29] 1 - K0DB4: SDCLK0 = MemClk / 4
> + * [28] 0 - reserved
> + * [27] 0 - reserved
> + * [26] 0 - reserved
> + * [25] 0 - K2FREE: not free running
> + * [24] 0 - K1FREE: not free running
> + * [23] 0 - K0FREE: not free running
> + * [22] 0 - SLFRSH: self refresh disabled
> + * [21] 0 - reserved
> + * [20] 1 - APD: no SDRAM auto power down
> + * [19] 0 - K2DB2: SDCLK2 is MemClk
> + * [18] 0 - K2RUN: disable SDCLK2
> + * [17] 1 - K1DB2: SDCLK1 = MemClk / 2
> + * [16] 1 - K1RUN: enable SDCLK1
> + * [15] 1 - E1PIN: SDRAM clock enable
> + * [14] 0 - K0DB2: SDCLK0 is MemClk
> + * [13] 0 - K0RUN: disable SDCLK0
> + * [12] 0 - RESERVED
> + * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 25
> + */
> +#define CONFIG_MDREFR_VAL 0x20138017
> +
> +/* MDMRS: Mode Register Set Configuration Register
> + *
> + * [31] 0 - reserved
> + * [30:23] 00000000 - MDMRS2: SDRAM2/3 MRS Value. (not used)
> + * [22:20] 011 - MDCL2: SDRAM2/3 Cas Latency. (not used)
> + * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used)
> + * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used)
> + * [15] 0 - reserved
> + * [14:07] 00000000 - MDMRS0: SDRAM0/1 MRS Value.
> + * [06:04] 011 - MDCL0: SDRAM0/1 Cas Latency.
> + * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential.
> + * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4.
> + */
> +#define CONFIG_MDMRS_VAL 0x00320032
> +
> +/*********************************************************************
> + * CONFIG PXA270 Clock generation *
> + *********************************************************************/
> +#define CONFIG_FLYCNFG_VAL 0x00010001
> +#define CONFIG_SXCNFG_VAL 0x00000000
> +#define CONFIG_CKEN (CKEN_MEMC | CKEN_OSTIMER)
> +
> +/* Memory Clock = System-Bus Freq., N=1, L=16 => 12x16=208, 208x1=208 MHz */
> +#define CONFIG_CCCR 0x02000210
> +
> +#endif /* __CONFIG_H */
> diff --git a/arch/arm/boards/mioa701/env/bin/init b/arch/arm/boards/mioa701/env/bin/init
> new file mode 100644
> index 0000000..2f99eb8
> --- /dev/null
> +++ b/arch/arm/boards/mioa701/env/bin/init
> @@ -0,0 +1,13 @@
> +#!/bin/sh
> +
> +PATH=/env/bin
> +export PATH
> +
> +. /env/config
> +
> +fb0.enable=1
> +
> +while [ -z $toto ]; do
> + readline "Give me a word" word
> + echo "I've got your $word"
> +done
> diff --git a/arch/arm/boards/mioa701/env/config b/arch/arm/boards/mioa701/env/config
> new file mode 100644
> index 0000000..67504c2
> --- /dev/null
> +++ b/arch/arm/boards/mioa701/env/config
> @@ -0,0 +1,4 @@
> +#!/bin/sh
> +
> +# MioA701 empty config
> +# Should be filled in once development is advanced enough
> diff --git a/arch/arm/boards/mioa701/lowlevel_init.S b/arch/arm/boards/mioa701/lowlevel_init.S
> new file mode 100644
> index 0000000..72b5436
> --- /dev/null
> +++ b/arch/arm/boards/mioa701/lowlevel_init.S
> @@ -0,0 +1,46 @@
> +/*
> + *
> + * (c) 2012 Robert Jarzmik <robert.jarzmik@free.fr>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
dito
> + */
> +
> +#define writel(val, reg) \
> + ldr r0, =reg; \
> + ldr r1, =val; \
> + str r1, [r0];
> +
> +#define writeb(val, reg) \
> + ldr r0, =reg; \
> + ldr r1, =val; \
> + strb r1, [r0];
> +
> + .section ".text_bare_init","ax"
> +.global board_init_lowlevel
> +board_init_lowlevel:
> + mov r10, lr
> + /*
> + * This piece of code should ensure at least:
> + * - getting SDRAM out of self-refresh, and/or setup SDRAM timings
> + * - putting the GPIO logic into a usable state
> + bl stabilize_reset
> + bl setup_sdram
> + bl setup_gpios
> + */
> + mov pc, r10
> diff --git a/arch/arm/boards/mioa701/mioa701.h b/arch/arm/boards/mioa701/mioa701.h
> new file mode 100644
> index 0000000..c561b80
> --- /dev/null
> +++ b/arch/arm/boards/mioa701/mioa701.h
> @@ -0,0 +1,86 @@
> +/*
> + * (C) 2012 Robert Jarzmik <robert.jarzmik@free.fr>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
dito
> + *
> + */
> +#ifndef _MIOA701_H_
> +#define _MIOA701_H_
> +
> +#define MIO_CFG_IN(pin, af) \
> + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
> + (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN))
> +
> +#define MIO_CFG_OUT(pin, af, state) \
> + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
> + (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
> +
> +/* Global GPIOs */
> +#define GPIO9_CHARGE_EN 9
> +#define GPIO18_POWEROFF 18
> +#define GPIO87_LCD_POWER 87
> +#define GPIO96_AC_DETECT 96
> +#define GPIO80_MAYBE_CHARGE_VDROP 80 /* Drop of 88mV */
> +
> +/* USB */
> +#define GPIO13_nUSB_DETECT 13
> +#define GPIO22_USB_ENABLE 22
> +
> +/* SDIO bits */
> +#define GPIO78_SDIO_RO 78
> +#define GPIO15_SDIO_INSERT 15
> +#define GPIO91_SDIO_EN 91
> +
> +/* Bluetooth */
> +#define GPIO14_BT_nACTIVITY 14
> +#define GPIO83_BT_ON 83
> +#define GPIO77_BT_UNKNOWN1 77
> +#define GPIO86_BT_MAYBE_nRESET 86
> +
> +/* GPS */
> +#define GPIO23_GPS_UNKNOWN1 23
> +#define GPIO26_GPS_ON 26
> +#define GPIO27_GPS_RESET 27
> +#define GPIO106_GPS_UNKNOWN2 106
> +#define GPIO107_GPS_UNKNOWN3 107
> +
> +/* GSM */
> +#define GPIO24_GSM_MOD_RESET_CMD 24
> +#define GPIO88_GSM_nMOD_ON_CMD 88
> +#define GPIO90_GSM_nMOD_OFF_CMD 90
> +#define GPIO114_GSM_nMOD_DTE_UART_STATE 114
> +#define GPIO25_GSM_MOD_ON_STATE 25
> +#define GPIO113_GSM_EVENT 113
> +
> +/* SOUND */
> +#define GPIO12_HPJACK_INSERT 12
> +
> +/* LEDS */
> +#define GPIO10_LED_nCharging 10
> +#define GPIO97_LED_nBlue 97
> +#define GPIO98_LED_nOrange 98
> +#define GPIO82_LED_nVibra 82
> +#define GPIO115_LED_nKeyboard 115
> +
> +/* Keyboard */
> +#define GPIO0_KEY_POWER 0
> +#define GPIO93_KEY_VOLUME_UP 93
> +#define GPIO94_KEY_VOLUME_DOWN 94
> +
> +#endif /* _MIOA701_H */
> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
> index 9e3c53a..2e5cb1c 100644
> --- a/arch/arm/mach-pxa/Kconfig
> +++ b/arch/arm/mach-pxa/Kconfig
> @@ -2,9 +2,11 @@ if ARCH_PXA
>
> config ARCH_TEXT_BASE
> hex
> + default 0xa0000000 if MACH_MIOA701
>
> config BOARDINFO
> string
> + default "Scoter Mitac Mio A701" if MACH_MIOA701
>
> # ----------------------------------------------------------
>
> @@ -28,6 +30,13 @@ if ARCH_PXA27X
> choice
> prompt "PXA27x Board Type"
>
> +config MACH_MIOA701
> + bool "Mitac Mio A701"
> + select MACH_HAS_LOWLEVEL_INIT
> + help
> + Say Y here if you are using a Mitac Mio A701 smartphone
> + board
> +
> endchoice
>
> endif
> diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
> index c01a9e0..6a02a54 100644
> --- a/arch/arm/mach-pxa/Makefile
> +++ b/arch/arm/mach-pxa/Makefile
> @@ -1,6 +1,7 @@
> obj-y += clocksource.o
> obj-y += common.o
> obj-y += gpio.o
> +obj-y += devices.o
>
> obj-$(CONFIG_ARCH_PXA2XX) += mfp-pxa2xx.o
> obj-$(CONFIG_ARCH_PXA27X) += speed-pxa27x.o
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
[-- Attachment #2: Type: text/plain, Size: 149 bytes --]
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2011-11-24 9:14 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-24 3:02 [PATCH 0/9] Initial PXA support and Mitac MIOA701 board Robert Jarzmik
2011-11-24 3:02 ` [PATCH 1/9] initial Intel/Marvell PXA support Robert Jarzmik
2011-11-24 9:29 ` Sascha Hauer
2011-11-25 21:26 ` Robert Jarzmik
2011-11-24 3:02 ` [PATCH 2/9] fix association of cache handling code for PXA Robert Jarzmik
2011-11-24 3:02 ` [PATCH 3/9] fix core version selection Robert Jarzmik
2011-11-24 3:02 ` [PATCH 4/9] add PXA framebuffer support Robert Jarzmik
2011-11-24 3:02 ` [PATCH 5/9] drivers: pxafb: Fix IOMEM API evolution Robert Jarzmik
2011-11-24 3:02 ` [PATCH 6/9] drivers: pxafb: add include ifdefery Robert Jarzmik
2011-11-24 3:02 ` [PATCH 7/9] arm/mach-pxa: add gpio direction functions Robert Jarzmik
2011-11-24 3:02 ` [PATCH 8/9] arm/mach-pxa: add basic devices hooks Robert Jarzmik
2011-11-24 3:02 ` [PATCH 9/9] arm/mach-pxa: add mioa701 board Robert Jarzmik
2011-11-24 9:13 ` Marc Kleine-Budde [this message]
2011-11-24 21:15 ` Robert Jarzmik
2011-11-24 9:45 ` Sascha Hauer
2011-11-24 21:22 ` Robert Jarzmik
2011-11-24 23:08 ` Sascha Hauer
2011-11-25 21:50 ` Robert Jarzmik
2011-11-24 9:10 ` [PATCH 0/9] Initial PXA support and Mitac MIOA701 board Marc Kleine-Budde
2011-11-24 9:28 ` Sascha Hauer
2011-11-24 21:32 ` Robert Jarzmik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ECE0ACE.2070103@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=robert.jarzmik@free.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox