* test
@ 2012-05-25 14:52 Klokov Alexey
2012-05-29 12:48 ` Imx28 sdram initialisation? Robin van der Gracht
0 siblings, 1 reply; 3+ messages in thread
From: Klokov Alexey @ 2012-05-25 14:52 UTC (permalink / raw)
To: barebox
test
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Imx28 sdram initialisation?
2012-05-25 14:52 test Klokov Alexey
@ 2012-05-29 12:48 ` Robin van der Gracht
2012-05-29 13:44 ` Juergen Beisert
0 siblings, 1 reply; 3+ messages in thread
From: Robin van der Gracht @ 2012-05-29 12:48 UTC (permalink / raw)
Cc: barebox
Hello,
Currently i'm working on our new board, equipped with a imx287 processor,
using the 'karo-tx28' and 'freescale-mx28-evk' bsp as reference for our
own bsp.
But I can't find sdram initialisation, lowlevel routines, or dcd support
for imx28.
So i'm wondering how and where this is done for the boards mentioned before.
Reguards,
--
Robin van der Gracht
Protonic Holland.
tel.: +31 (0) 229 212928
fax.: +31 (0) 229 210930
Factorij 36 / 1689 AL Zwaag
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-05-29 13:45 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-05-25 14:52 test Klokov Alexey
2012-05-29 12:48 ` Imx28 sdram initialisation? Robin van der Gracht
2012-05-29 13:44 ` Juergen Beisert
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox