mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Roland Hieber <rhi@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 14/16] ARM: at91: microchip-ksz9477-evb: implement first stage
Date: Tue, 26 Feb 2019 10:05:29 +0100	[thread overview]
Message-ID: <4de25dcf-38df-24d1-a326-034bd5ca1fb4@pengutronix.de> (raw)
In-Reply-To: <20190222134501.mimpz674uneisgl7@pengutronix.de>



On 22/2/19 14:45, Roland Hieber wrote:
> Hi Ahmad, 
> 
> On Tue, Feb 19, 2019 at 06:21:48PM +0100, Ahmad Fatoum wrote:
>> This imports the low level init code from at91bootstrap
>> https://github.com/linux4sam/at91bootstrap/blob/v3.8.12/board/sama5d3_xplained/sama5d3_xplained.c
> 
> This file is under a BSD-style license:
> 
>      8   * Redistribution and use in source and binary forms, with or without
>      9   * modification, are permitted provided that the following conditions are met:
>     10   *
>     11   * - Redistributions of source code must retain the above copyright notice,
>     12   * this list of conditions and the disclaimer below.
>     13   *
>     14   * Atmel's name may not be used to endorse or promote products derived from
>     15   * this software without specific prior written permission.
> 
>>
>> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
>> ---
>>  .../boards/microchip-ksz9477-evb/lowlevel.c   | 194 +++++++++++++++++-
>>  arch/arm/mach-at91/Kconfig                    |   2 +
>>  arch/arm/mach-at91/include/mach/at91_pmc.h    |   8 +
>>  arch/arm/mach-at91/include/mach/sama5d3.h     |   1 +
>>  images/Makefile.at91                          |   4 +
>>  5 files changed, 205 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c b/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
>> index 4293f8aaa57d..2813743c0765 100644
>> --- a/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
>> +++ b/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
>> @@ -1,7 +1,7 @@
>>  /*
>>   * Copyright (C) 2018 Ahmad Fatoum, Pengutronix
>>   *
>> - * Under GPLv2
>> + * SPDX-License-Identifier: GPL-2.0-only
> 
> ... which must be added here, including the original copyright and
> the disclaimer to fulfil their license.
> 
> I didn't check if this also applies to other commits in this series, but
> I wouldn't rule it out.
> 
>  - Roland

Oh, will fix this in v3 as well.

> 
>>   */
>>  
>>  #include <common.h>
>> @@ -10,18 +10,204 @@
>>  #include <asm/barebox-arm-head.h>
>>  #include <asm/barebox-arm.h>
>>  
>> -#include <mach/hardware.h>
>> +#include <debug_ll.h>
>> +#include <linux/kconfig.h>
>> +#include <mach/at91_dbgu.h>
>> +#include <mach/at91_ddrsdrc.h>
>> +#include <mach/at91_lowlevel_clock.h>
>> +#include <mach/at91_pio.h>
>> +#include <mach/at91_pmc.h>
>> +#include <mach/at91_wdt.h>
>> +#include <mach/ddramc.h>
>> +#include <mach/early_udelay.h>
>> +#include <mach/gpio.h>
>> +#include <mach/iomux.h>
>>  
>> +/* PCK = 528MHz, MCK = 132MHz */
>> +#define MASTER_CLOCK	132000000
>> +
>> +#define PMC_BASE IOMEM(SAMA5D3_BASE_PMC)
>> +#define sama5d3_pmc_enable_periph_clock(clk) \
>> +	at91_pmc_enable_periph_clock(PMC_BASE, clk)
>> +
>> +#define BAUDRATE(mck, baud) \
>> +	((((((mck) * 10) / ((baud) * 16)) % 10) >= 5) ? \
>> +	(mck / (baud * 16) + 1) : ((mck) / (baud * 16)))
>> +
>> +
>> +static void configure_piob_pin(unsigned int pin)
>> +{
>> +	void __iomem *pio = IOMEM(SAMA5D3_BASE_PIOB);
>> +	u32 mask = pin_to_mask(pin);
>> +
>> +	at91_mux_disable_interrupt(pio, mask);
>> +	at91_mux_set_pullup(pio, mask, 0);
>> +	at91_mux_pio3_set_pulldown(pio, mask, 0);
>> +
>> +	at91_mux_pio3_set_A_periph(pio, mask);
>> +
>> +	at91_mux_gpio_disable(pio, mask);
>> +}
>> +
>> +static noinline void dbgu_init(void)
>> +{
>> +	sama5d3_pmc_enable_periph_clock(SAMA5D3_ID_PIOB);
>> +
>> +	configure_piob_pin(AT91_PIN_PB30);
>> +	configure_piob_pin(AT91_PIN_PB31);
>> +
>> +	sama5d3_pmc_enable_periph_clock(SAMA5D3_ID_DBGU);
>> +	at91_dbgu_setup_ll(AT91_BASE_DBGU1, BAUDRATE(MASTER_CLOCK, 115200));
>> +
>> +	putc_ll('>');
>> +}
>> +
>> +static void ddramc_reg_config(struct at91_ddramc_register *ddramc_config)
>> +{
>> +	ddramc_config->mdr = (AT91C_DDRC2_DBW_32_BITS
>> +				| AT91C_DDRC2_MD_DDR2_SDRAM);
>> +
>> +	ddramc_config->cr = (AT91C_DDRC2_NC_DDR10_SDR9
>> +				| AT91C_DDRC2_NR_13
>> +				| AT91C_DDRC2_CAS_3
>> +				| AT91C_DDRC2_DISABLE_RESET_DLL
>> +				| AT91C_DDRC2_ENABLE_DLL
>> +				| AT91C_DDRC2_ENRDM_ENABLE
>> +				| AT91C_DDRC2_NB_BANKS_8
>> +				| AT91C_DDRC2_NDQS_DISABLED
>> +				| AT91C_DDRC2_DECOD_INTERLEAVED
>> +				| AT91C_DDRC2_UNAL_SUPPORTED);
>> +
>> +	/*
>> +	 * The DDR2-SDRAM device requires a refresh every 15.625 us or 7.81 us.
>> +	 * With a 133 MHz frequency, the refresh timer count register must to be
>> +	 * set with (15.625 x 133 MHz) ~ 2084 i.e. 0x824
>> +	 * or (7.81 x 133 MHz) ~ 1039 i.e. 0x40F.
>> +	 */
>> +	ddramc_config->rtr = 0x40F;     /* Refresh timer: 7.812us */
>> +
>> +	/* One clock cycle @ 133 MHz = 7.5 ns */
>> +	ddramc_config->t0pr = (AT91C_DDRC2_TRAS_(6)	/* 6 * 7.5 = 45 ns */
>> +			| AT91C_DDRC2_TRCD_(2)		/* 2 * 7.5 = 22.5 ns */
>> +			| AT91C_DDRC2_TWR_(2)		/* 2 * 7.5 = 15   ns */
>> +			| AT91C_DDRC2_TRC_(8)		/* 8 * 7.5 = 75   ns */
>> +			| AT91C_DDRC2_TRP_(2)		/* 2 * 7.5 = 15   ns */
>> +			| AT91C_DDRC2_TRRD_(2)		/* 2 * 7.5 = 15   ns */
>> +			| AT91C_DDRC2_TWTR_(2)		/* 2 clock cycles min */
>> +			| AT91C_DDRC2_TMRD_(2));	/* 2 clock cycles */
>> +
>> +	ddramc_config->t1pr = (AT91C_DDRC2_TXP_(2)	/* 2 clock cycles */
>> +			| AT91C_DDRC2_TXSRD_(200)	/* 200 clock cycles */
>> +			| AT91C_DDRC2_TXSNR_(19)	/* 19 * 7.5 = 142.5 ns */
>> +			| AT91C_DDRC2_TRFC_(17));	/* 17 * 7.5 = 127.5 ns */
>> +
>> +	ddramc_config->t2pr = (AT91C_DDRC2_TFAW_(6)	/* 6 * 7.5 = 45 ns */
>> +			| AT91C_DDRC2_TRTP_(2)		/* 2 clock cycles min */
>> +			| AT91C_DDRC2_TRPA_(2)		/* 2 * 7.5 = 15 ns */
>> +			| AT91C_DDRC2_TXARDS_(8)	/* = TXARD */
>> +			| AT91C_DDRC2_TXARD_(8));	/* MR12 = 1 */
>> +}
>> +
>> +static void sama5d3_ddramc_init(void)
>> +{
>> +	struct at91_ddramc_register ddramc_reg;
>> +	u32 reg;
>> +
>> +	ddramc_reg_config(&ddramc_reg);
>> +
>> +	/* enable ddr2 clock */
>> +	sama5d3_pmc_enable_periph_clock(SAMA5D3_ID_MPDDRC);
>> +	at91_pmc_enable_system_clock(PMC_BASE, AT91CAP9_PMC_DDR);
>> +
>> +
>> +	/* Init the special register for sama5d3x */
>> +	/* MPDDRC DLL Slave Offset Register: DDR2 configuration */
>> +	reg = AT91C_MPDDRC_S0OFF_1
>> +		| AT91C_MPDDRC_S2OFF_1
>> +		| AT91C_MPDDRC_S3OFF_1;
>> +	writel(reg, SAMA5D3_BASE_MPDDRC + AT91C_MPDDRC_DLL_SOR);
>> +
>> +	/* MPDDRC DLL Master Offset Register */
>> +	/* write master + clk90 offset */
>> +	reg = AT91C_MPDDRC_MOFF_7
>> +		| AT91C_MPDDRC_CLK90OFF_31
>> +		| AT91C_MPDDRC_SELOFF_ENABLED | AT91C_MPDDRC_KEY;
>> +	writel(reg, SAMA5D3_BASE_MPDDRC + AT91C_MPDDRC_DLL_MOR);
>> +
>> +	/* MPDDRC I/O Calibration Register */
>> +	/* DDR2 RZQ = 50 Ohm */
>> +	/* TZQIO = 4 */
>> +	reg = AT91C_MPDDRC_RDIV_DDR2_RZQ_50
>> +		| AT91C_MPDDRC_TZQIO_4;
>> +	writel(reg, SAMA5D3_BASE_MPDDRC + AT91C_MPDDRC_IO_CALIBR);
>> +
>> +	/* DDRAM2 Controller initialize */
>> +	at91_ddram_initialize(SAMA5D3_BASE_MPDDRC, SAMA5_DDRCS, &ddramc_reg);
>> +}
>> +
>> +extern char __dtb_z_at91_microchip_ksz9477_evb_boot_bin_start[];
>>  extern char __dtb_z_at91_microchip_ksz9477_evb_start[];
>>  
>> -ENTRY_FUNCTION(start_sama5d3_xplained_ung8071, r0, r1, r2)
>> +static noinline void board_init(void)
>>  {
>> -	void *fdt;
>> +	void *fdt = NULL;
>> +
>> +	at91_wdt_disable(IOMEM(SAMA5D3_BASE_WDT));
>> +	at91_lowlevel_clock_init(PMC_BASE);
>> +
>> +	/* At this stage the main oscillator
>> +	 * is supposed to be enabled PCK = MCK = MOSC
>> +	 */
>> +
>> +	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
>> +	at91_pmc_cfg_plla(PMC_BASE, AT91_PMC3_MUL_(43) | AT91_PMC_OUT_0
>> +			  | AT91_PMC_PLLCOUNT
>> +			  | AT91_PMC_DIV_BYPASS);
>> +
>> +	/* Initialize PLLA charge pump */
>> +	at91_pmc_init_pll(PMC_BASE, AT91_PMC_IPLLA_3);
>> +
>> +	/* Switch PCK/MCK on Main clock output */
>> +	at91_pmc_cfg_mck(PMC_BASE, AT91SAM9_PMC_MDIV_4 | AT91_PMC_CSS_MAIN);
>> +
>> +	/* Switch PCK/MCK on PLLA output */
>> +	at91_pmc_cfg_mck(PMC_BASE, AT91SAM9_PMC_MDIV_4 | AT91_PMC_CSS_PLLA);
>> +
>> +	if (IS_ENABLED(CONFIG_DEBUG_LL))
>> +		dbgu_init();
>> +
>> +	early_udelay_init(PMC_BASE, IOMEM(SAMA5D3_BASE_PIT),
>> +			  SAMA5D3_ID_PIT, MASTER_CLOCK);
>> +
>> +	sama5d3_ddramc_init();
>>  
>> +	fdt = __dtb_z_at91_microchip_ksz9477_evb_boot_bin_start + get_runtime_offset();
>> +
>> +	barebox_arm_entry(SAMA5_DDRCS, SZ_256M, fdt);
>> +}
>> +
>> +ENTRY_FUNCTION(start_sama5d3_xplained_ung8071_boot_bin, r0, r1, r2)
>> +{
>>  	arm_cpu_lowlevel_init();
>>  
>>  	arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE - 16);
>>  
>> +	relocate_to_current_adr();
>> +	setup_c();
>> +	barrier();
>> +
>> +	board_init();
>> +}
>> +
>> +ENTRY_FUNCTION(start_sama5d3_xplained_ung8071, r0, r1, r2)
>> +{
>> +	void *fdt;
>> +
>> +	arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE - 16);
>> +
>> +	if (IS_ENABLED(CONFIG_DEBUG_LL))
>> +		dbgu_init();
>> +
>>  	fdt = __dtb_z_at91_microchip_ksz9477_evb_start + get_runtime_offset();
>>  
>>  	barebox_arm_entry(SAMA5_DDRCS, SZ_256M, fdt);
>> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
>> index 7b8c07c3ba97..5d5b4f2b6e60 100644
>> --- a/arch/arm/mach-at91/Kconfig
>> +++ b/arch/arm/mach-at91/Kconfig
>> @@ -202,6 +202,7 @@ config ARCH_SAMA5D3
>>  	select SOC_SAMA5D3
>>  	select HAS_MACB
>>  	select HAVE_MACH_ARM_HEAD
>> +	select HAVE_AT91_LOAD_BAREBOX_SRAM
>>  
>>  config ARCH_SAMA5D4
>>  	bool "SAMA5D4"
>> @@ -556,6 +557,7 @@ config MACH_MICROCHIP_KSZ9477_EVB
>>  	select OFDEVICE
>>  	select COMMON_CLK_OF_PROVIDER
>>  	select ARM_USE_COMPRESSED_DTB
>> +	select HAVE_AT91_BOOTSTRAP
>>  	help
>>  	  Select this if you are using Microchip's EVB-KSZ9477 Evaluation Kit.
>>  
>> diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
>> index 22e296ef4152..dace1fc61c52 100644
>> --- a/arch/arm/mach-at91/include/mach/at91_pmc.h
>> +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
>> @@ -63,9 +63,17 @@
>>  #define	AT91_CKGR_PLLAR		0x28			/* PLL A Register */
>>  #define	AT91_CKGR_PLLBR		0x2c			/* PLL B Register */
>>  #define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
>> +#define			AT91_PMC_DIV_BYPASS	(1 << 0)		/* Divider bypass */
>>  #define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
>>  #define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
>> +#define			AT91_PMC_OUT_0		(0 << 14)
>> +#define			AT91_PMC_OUT_1		(1 << 14)
>> +#define			AT91_PMC_OUT_2		(2 << 14)
>> +#define			AT91_PMC_OUT_3		(3 << 14)
>>  #define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
>> +#define			AT91_PMC_MUL_(n)		(((n) << 16) & AT91_PMC_MUL)
>> +#define		AT91_PMC3_MUL		(0x7f << 18)		/* PLL Multiplier [SAMA5 only]*/
>> +#define			AT91_PMC3_MUL_(n)		(((n) << 18) & AT91_PMC3_MUL)
>>  #define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
>>  #define			AT91_PMC_USBDIV_1		(0 << 28)
>>  #define			AT91_PMC_USBDIV_2		(1 << 28)
>> diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h
>> index f0e53610c6c0..da6e825593e6 100644
>> --- a/arch/arm/mach-at91/include/mach/sama5d3.h
>> +++ b/arch/arm/mach-at91/include/mach/sama5d3.h
>> @@ -87,6 +87,7 @@
>>  #define SAMA5D3_BASE_PIOC	0xfffff600
>>  #define SAMA5D3_BASE_PIOD	0xfffff800
>>  #define SAMA5D3_BASE_PIOE	0xfffffa00
>> +#define SAMA5D3_BASE_PMC	0xfffffc00
>>  #define SAMA5D3_BASE_MPDDRC	0xffffea00
>>  #define	SAMA5D3_BASE_HSMC	0xffffc000
>>  #define SAMA5D3_BASE_RSTC	0xfffffe00
>> diff --git a/images/Makefile.at91 b/images/Makefile.at91
>> index 3f1dd57f6c58..f8afa2a240cd 100644
>> --- a/images/Makefile.at91
>> +++ b/images/Makefile.at91
>> @@ -14,6 +14,10 @@ pblb-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += start_sama5d3_xplained_ung8071
>>  FILE_barebox-microchip-ksz9477-evb.img = start_sama5d3_xplained_ung8071.pblb
>>  at91-barebox-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += barebox-microchip-ksz9477-evb.img
>>  
>> +pblb-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += start_sama5d3_xplained_ung8071_boot_bin
>> +FILE_barebox-microchip-ksz9477-evb-boot.bin.img = start_sama5d3_xplained_ung8071_boot_bin.pblb
>> +at91-boot-bin-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += barebox-microchip-ksz9477-evb-boot.bin.img
>> +
>>  ifdef CONFIG_AT91_LOAD_BAREBOX_SRAM
>>  image-y += $(at91-boot-bin-y)
>>  else
>> -- 
>> 2.20.1
>>
>>
>> _______________________________________________
>> barebox mailing list
>> barebox@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/barebox
>>
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2019-02-26  9:05 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-19 17:21 [PATCH v2 00/16] ARM: at91: microchip-kz9477-evb: support first stage boot Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 01/16] LICENSES: add BSD-1-Clause license Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 02/16] ARM: at91: import at91bootstrap's at91_ddrsdrc.h Ahmad Fatoum
2019-02-22 13:33   ` Roland Hieber
2019-02-26  9:04     ` Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 03/16] ARM: at91: migrate at91sam9_ddrsdr.h to use " Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 04/16] ARM: at91: replace at91sam9_ddrsdr.h with " Ahmad Fatoum
2019-02-20  9:07   ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 05/16] ARM: at91: watchdog: implement at91_wdt_disable Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 06/16] ARM: at91: import lowlevel clock initialization from at91bootstrap Ahmad Fatoum
2019-02-20  9:11   ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 07/16] ARM: at91: import early_udelay " Ahmad Fatoum
2019-02-20  9:20   ` Sascha Hauer
2019-02-20  9:23     ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 08/16] ARM: at91: import low level DDRAMC initialization code " Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 09/16] ARM: at91: import lowlevel dbgu UART init " Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 10/16] images: at91: differentiate between first and second stage images Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 11/16] ARM: at91: sama5: specify 0x10000 as first stage max size Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 12/16] ARM: at91: microchip-ksz9477-evb: use compressed DTB Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 13/16] ARM: dts: microchip-ksz9477-evb: add dummy first stage device tree Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 14/16] ARM: at91: microchip-ksz9477-evb: implement first stage Ahmad Fatoum
2019-02-22 13:45   ` Roland Hieber
2019-02-26  9:05     ` Ahmad Fatoum [this message]
2019-02-19 17:21 ` [PATCH v2 15/16] ARM: at91: microchip-ksz9477: provide board code fallback Ahmad Fatoum
2019-02-20  9:27   ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 16/16] doc: microchip-ksz9477-evb: add documentation Ahmad Fatoum
2019-02-24 12:42 ` [PATCH v2 00/16] ARM: at91: microchip-kz9477-evb: support first stage boot Sam Ravnborg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4de25dcf-38df-24d1-a326-034bd5ca1fb4@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=rhi@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox