From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from s250.sam-solutions.net ([217.21.49.219]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1UUbqi-0006qN-Qy for barebox@lists.infradead.org; Tue, 23 Apr 2013 11:57:37 +0000 Received: from s246.sam-solutions.net ([217.21.35.55]) by s250.sam-solutions.net with esmtps (TLSv1:RC4-MD5:128) (Exim 4.77) (envelope-from ) id 1UUbqd-0006H8-6i for barebox@lists.infradead.org; Tue, 23 Apr 2013 14:57:23 +0300 Message-ID: <51767713.8070507@sam-solutions.net> Date: Tue, 23 Apr 2013 14:57:07 +0300 From: Uladzimir Bely MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="us-ascii"; Format="flowed" Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH] ARM OMAP5: Basic support of Texas Instruments OMAP5 processors To: barebox@lists.infradead.org Since commit: 43f9a96a ubimkvol: Typo fix Patch adds basic OMAP5 support to barebox. Tested on SD card with 2 partitions: vfat (MLO, barebox.bin, zImage) and ext3 (rootfs). Barebox successfully starts kernel from commandline with "bootm /boot/zImage" command. Building MLO: make omap5_sevm_xload_defconfig; make. Building barebox.bin: make omap5_sevm_defconfig; make. From 30cda1d8958262a9ba4e1398ae1c9fa04b7b804e Mon Sep 17 00:00:00 2001 From: Uladzimir Bely Date: Tue, 23 Apr 2013 14:52:18 +0300 Subject: [PATCH] ARM: OMAP5 processors support Signed-off-by: Uladzimir Bely --- arch/arm/Makefile | 1 + arch/arm/boards/omap5_sevm/Makefile | 2 + arch/arm/boards/omap5_sevm/board.c | 73 ++++ arch/arm/boards/omap5_sevm/config.h | 1 + arch/arm/boards/omap5_sevm/env/config | 11 + arch/arm/boards/omap5_sevm/lowlevel.c | 137 +++++++ arch/arm/boards/omap5_sevm/mux.c | 284 +++++++++++++ arch/arm/configs/omap5_sevm_defconfig | 68 ++++ arch/arm/configs/omap5_sevm_xload_defconfig | 44 ++ arch/arm/mach-omap/Kconfig | 16 + arch/arm/mach-omap/Makefile | 2 + arch/arm/mach-omap/gpmc.c | 3 + arch/arm/mach-omap/include/mach/debug_ll.h | 5 + arch/arm/mach-omap/include/mach/generic.h | 7 + arch/arm/mach-omap/include/mach/gpmc_nand.h | 1 + arch/arm/mach-omap/include/mach/omap5-clock.h | 444 +++++++++++++++++++++ arch/arm/mach-omap/include/mach/omap5-mux.h | 321 +++++++++++++++ arch/arm/mach-omap/include/mach/omap5-silicon.h | 244 ++++++++++++ arch/arm/mach-omap/omap5_clock.c | 385 ++++++++++++++++++ arch/arm/mach-omap/omap5_generic.c | 510 ++++++++++++++++++++++++ arch/arm/mach-omap/omap_generic.c | 2 + arch/arm/mach-omap/s32k_clksource.c | 7 + drivers/mci/Kconfig | 2 +- 23 files changed, 2569 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boards/omap5_sevm/Makefile create mode 100644 arch/arm/boards/omap5_sevm/board.c create mode 100644 arch/arm/boards/omap5_sevm/config.h create mode 100644 arch/arm/boards/omap5_sevm/env/config create mode 100644 arch/arm/boards/omap5_sevm/lowlevel.c create mode 100644 arch/arm/boards/omap5_sevm/mux.c create mode 100644 arch/arm/configs/omap5_sevm_defconfig create mode 100644 arch/arm/configs/omap5_sevm_xload_defconfig create mode 100644 arch/arm/mach-omap/include/mach/omap5-clock.h create mode 100644 arch/arm/mach-omap/include/mach/omap5-mux.h create mode 100644 arch/arm/mach-omap/include/mach/omap5-silicon.h create mode 100644 arch/arm/mach-omap/omap5_clock.c create mode 100644 arch/arm/mach-omap/omap5_generic.c diff --git a/arch/arm/Makefile b/arch/arm/Makefile index d506b12..fb459b5 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -162,6 +162,7 @@ board-$(CONFIG_MACH_SABRELITE) := freescale-mx6-sabrelite board-$(CONFIG_MACH_TX53) := karo-tx53 board-$(CONFIG_MACH_GUF_VINCELL) := guf-vincell board-$(CONFIG_MACH_EFIKA_MX_SMARTBOOK) := efika-mx-smartbook +board-$(CONFIG_MACH_OMAP5_SEVM) := omap5_sevm board-$(CONFIG_MACH_SABRESD) := freescale-mx6-sabresd board-$(CONFIG_MACH_REALQ7) := dmo-mx6-realq7 board-$(CONFIG_MACH_ZEDBOARD) := avnet-zedboard diff --git a/arch/arm/boards/omap5_sevm/Makefile b/arch/arm/boards/omap5_sevm/Makefile new file mode 100644 index 0000000..df3764c --- /dev/null +++ b/arch/arm/boards/omap5_sevm/Makefile @@ -0,0 +1,2 @@ +obj-y += board.o mux.o lowlevel.o +pbl-y += lowlevel.o mux.o diff --git a/arch/arm/boards/omap5_sevm/board.c b/arch/arm/boards/omap5_sevm/board.c new file mode 100644 index 0000000..c7b3c2d --- /dev/null +++ b/arch/arm/boards/omap5_sevm/board.c @@ -0,0 +1,73 @@ +/* + * omap5_sevm - OMAP5-based board initalization code + * + * (C) Copyright 2013 + * Sam Solutions, + * + * Authors: + * Uladzimir Bely + * Dmitry Lavnikevich + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct NS16550_plat serial_plat = { + .clock = 48000000, /* 48MHz (APLL96/2) */ + .shift = 2, +}; + +static int omap5_sevm_console_init(void) +{ + /* Register the serial port */ + add_ns16550_device(DEVICE_ID_DYNAMIC, OMAP54XX_UART3_BASE, 1024, + IORESOURCE_MEM_8BIT, &serial_plat); + + return 0; +} +console_initcall(omap5_sevm_console_init); + +static int omap5_sevm_mem_init(void) +{ + arm_add_mem_device("ram0", 0x80000000, SZ_512M); + add_mem_device("sram0", 0x40300000, 48*SZ_1K, IORESOURCE_MEM_WRITEABLE); + + return 0; +} +mem_initcall(omap5_sevm_mem_init); + +static int omap5_sevm_devices_init(void) +{ + add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL, 0x4809C100, SZ_4K, + IORESOURCE_MEM, NULL); + + armlinux_set_bootparams((void *)0x80000100); + armlinux_set_architecture(MACH_TYPE_OMAP5_SEVM); + + return 0; +} +device_initcall(omap5_sevm_devices_init); diff --git a/arch/arm/boards/omap5_sevm/config.h b/arch/arm/boards/omap5_sevm/config.h new file mode 100644 index 0000000..da84fa5 --- /dev/null +++ b/arch/arm/boards/omap5_sevm/config.h @@ -0,0 +1 @@ +/* nothing */ diff --git a/arch/arm/boards/omap5_sevm/env/config b/arch/arm/boards/omap5_sevm/env/config new file mode 100644 index 0000000..9752957 --- /dev/null +++ b/arch/arm/boards/omap5_sevm/env/config @@ -0,0 +1,11 @@ +#!/bin/sh + +machine=omap5 + +autoboot_timeout=2 + +bootargs="console=ttyO2,115200" + +kernel_loc=disk + +PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m " diff --git a/arch/arm/boards/omap5_sevm/lowlevel.c b/arch/arm/boards/omap5_sevm/lowlevel.c new file mode 100644 index 0000000..b4479b2 --- /dev/null +++ b/arch/arm/boards/omap5_sevm/lowlevel.c @@ -0,0 +1,137 @@ +/* + * omap5_sevm - OMAP5-based board low-level initalization code + * + * (C) Copyright 2013 + * Sam Solutions, + * + * Authors: + * Uladzimir Bely + * Dmitry Lavnikevich + * + * Derived from OMAP5 work in U-Boot project + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +void set_muxconf_regs(void); + +static const struct omap5_ddr_regs ddr_regs_elpida_532_mhz_2cs = { + .sdram_config_init = 0x80800EBA, /* 00 */ + .sdram_config = 0x808022BA, /* 04 */ + .ref_ctrl = 0x0000081A, /* 08 */ + .sdram_tim1 = 0x772F6873, /* 0c */ + .sdram_tim2 = 0x304a129a, /* 01 */ + .sdram_tim3 = 0x02f7e45f, /* 14 */ + .read_idle_ctrl = 0x00050000, /* 18 */ + .zq_config = 0x000b3215, /* 1c */ + .temp_alert_config = 0x08000a05, /* 20 */ + .emif_ddr_phy_ctlr_1_init = 0x0E28420d, /* 24 */ + .emif_ddr_phy_ctlr_1 = 0x0E28420d, /* 28 */ + .emif_ddr_ext_phy_ctrl_1_init = 0x04020080, /* 2c */ + .emif_ddr_ext_phy_ctrl_1 = 0x04020080, /* 30 */ + .emif_ddr_ext_phy_ctrl_2_init = 0x28C518A3, /* 34 */ + .emif_ddr_ext_phy_ctrl_2 = 0x28C518A3, /* 38 */ + .emif_ddr_ext_phy_ctrl_3_init = 0x518A3146, /* 3c */ + .emif_ddr_ext_phy_ctrl_3 = 0x518A3146, /* 40 */ + .emif_ddr_ext_phy_ctrl_4_init = 0x0014628C, /* 44 */ + .emif_ddr_ext_phy_ctrl_4 = 0x0014628C, /* 48 */ + .emif_ddr_ext_phy_ctrl_5_init = 0x04010040, /* 4c */ + .emif_ddr_ext_phy_ctrl_5 = 0x04010040, /* 50 */ + .emif_ddr_ext_phy_ctrl_6_init = 0x01004010, /* 54 */ + .emif_ddr_ext_phy_ctrl_6 = 0x01004010, /* 58 */ + .emif_ddr_ext_phy_ctrl_7_init = 0x00001004, /* 5c */ + .emif_ddr_ext_phy_ctrl_7 = 0x00001004, /* 60 */ + .emif_ddr_ext_phy_ctrl_8_init = 0x04010040, /* 64 */ + .emif_ddr_ext_phy_ctrl_8 = 0x04010040, /* 68 */ + .emif_ddr_ext_phy_ctrl_9_init = 0x01004010, /* 6c */ + .emif_ddr_ext_phy_ctrl_9 = 0x01004010, /* 70 */ + .emif_ddr_ext_phy_ctrl_10_init = 0x00001004, /* 74 */ + .emif_ddr_ext_phy_ctrl_10 = 0x00001004, /* 78 */ + .emif_ddr_ext_phy_ctrl_11_init = 0x00000000, /* 7c */ + .emif_ddr_ext_phy_ctrl_11 = 0x00000000, /* 80 */ + .emif_ddr_ext_phy_ctrl_12_init = 0x00000000, /* 84 */ + .emif_ddr_ext_phy_ctrl_12 = 0x00000000, /* 88 */ + .emif_ddr_ext_phy_ctrl_13_init = 0x00000000, /* 8c */ + .emif_ddr_ext_phy_ctrl_13 = 0x00000000, /* 90 */ + .emif_ddr_ext_phy_ctrl_14_init = 0x80080080, /* 94 */ + .emif_ddr_ext_phy_ctrl_14 = 0x80080080, /* 98 */ + .emif_ddr_ext_phy_ctrl_15_init = 0x00800800, /* 9c */ + .emif_ddr_ext_phy_ctrl_15 = 0x00800800, /* a0 */ + .emif_ddr_ext_phy_ctrl_16_init = 0x08102040, /* a4 */ + .emif_ddr_ext_phy_ctrl_16 = 0x08102040, /* a8 */ + .emif_ddr_ext_phy_ctrl_17_init = 0x00000001, /* ac */ + .emif_ddr_ext_phy_ctrl_17 = 0x00000001, /* b0 */ + .emif_ddr_ext_phy_ctrl_18_init = 0x540A8150, /* b4 */ + .emif_ddr_ext_phy_ctrl_18 = 0x540A8150, /* b8 */ + .emif_ddr_ext_phy_ctrl_19_init = 0xA81502A0, /* bc */ + .emif_ddr_ext_phy_ctrl_19 = 0xA81502a0, /* c0 */ + .emif_ddr_ext_phy_ctrl_20_init = 0x002A0540, /* c4 */ + .emif_ddr_ext_phy_ctrl_20 = 0x002A0540, /* c8 */ + .emif_ddr_ext_phy_ctrl_21_init = 0x00000000, /* cc */ + .emif_ddr_ext_phy_ctrl_21 = 0x00000000, /* d0 */ + .emif_ddr_ext_phy_ctrl_22_init = 0x00000000, /* d4 */ + .emif_ddr_ext_phy_ctrl_22 = 0x00000000, /* d8 */ + .emif_ddr_ext_phy_ctrl_23_init = 0x00000000, /* dc */ + .emif_ddr_ext_phy_ctrl_23 = 0x00000000, /* e0 */ + .emif_ddr_ext_phy_ctrl_24_init = 0x00000077, /* e4 */ + .emif_ddr_ext_phy_ctrl_24 = 0x00000077, /* e8 */ + .emif_rd_wr_lvl_rmp_win = 0x0, /* ec */ + .emif_rd_wr_lvl_rmp_ctl = 0x0, /* f0 */ + .emif_rd_wr_lvl_ctl = 0x20000000, /* f4 */ + .emif_rd_wr_exec_thresh = 0x00000305 /* f8 */ +}; + +static void noinline omap5_sevm_init_lowlevel(void) +{ + struct dpll_param core = OMAP5_CORE_DPLL_PARAM_19M2_NOM; + struct dpll_param mpu = OMAP5_MPU_DPLL_PARAM_19M2_NOM; + struct dpll_param iva = OMAP5_IVA_DPLL_PARAM_19M2_NOM; + struct dpll_param per = OMAP5_PER_DPLL_PARAM_19M2_NOM; + struct dpll_param abe = OMAP5_ABE_DPLL_PARAM; + struct dpll_param usb = OMAP5_USB_DPLL_PARAM_19M2; + + set_muxconf_regs(); + + omap5_ddr_init(&ddr_regs_elpida_532_mhz_2cs, &core); + + omap5_scale_vcores(); + + writel(CM_CLKSEL_SYS_19M2, CM_CLKSEL_SYS); + + /* Configure all DPLL's at 100% OPP */ + omap5_configure_mpu_dpll(&mpu); + omap5_configure_iva_dpll(&iva); + omap5_configure_per_dpll(&per); + omap5_configure_abe_dpll(&abe); + omap5_configure_usb_dpll(&usb); + + /* Enable all clocks */ + omap5_enable_all_clocks(); + + sr32(0x4Ae0a31C, 8, 1, 0x1); /* enable software ioreq */ + sr32(0x4Ae0a31C, 1, 2, 0x0); /* set for sys_clk (19.2MHz) */ + sr32(0x4Ae0a31C, 16, 4, 0x0); /* set divisor to 1 */ + sr32(0x4Ae0a110, 0, 1, 0x1); /* set the clock source to active */ + sr32(0x4Ae0a110, 2, 2, 0x3); /* enable clocks */ +} + +void barebox_arm_reset_vector(void) +{ + arm_cpu_lowlevel_init(); + + if (get_pc() > 0x80000000) + goto out; + + arm_setup_stack(0x4030d000); + + omap5_sevm_init_lowlevel(); +out: + barebox_arm_entry(0x80000000, SZ_512M, 0); +} diff --git a/arch/arm/boards/omap5_sevm/mux.c b/arch/arm/boards/omap5_sevm/mux.c new file mode 100644 index 0000000..4f6b5cd --- /dev/null +++ b/arch/arm/boards/omap5_sevm/mux.c @@ -0,0 +1,284 @@ +/* + * (C) Copyright 2013 + * Sam Solutions, + * + * Authors: + * Uladzimir Bely + * Dmitry Lavnikevich + * + * Derived from OMAP5 work in U-Boot project by + * Aneesh V + * Sricharan R + * (Copyright 2010, Texas Instruments, ) + */ + +#include +#include +#include +#include +#include +#include + +static const struct pad_conf_entry core_padconf_array[] = { + {EMMC_CLK, (PTU | IEN | M0)}, + {EMMC_CMD, (PTU | IEN | M0)}, + {EMMC_DATA0, (PTU | IEN | M0)}, + {EMMC_DATA1, (PTU | IEN | M0)}, + {EMMC_DATA2, (PTU | IEN | M0)}, + {EMMC_DATA3, (PTU | IEN | M0)}, + {EMMC_DATA4, (PTU | IEN | M0)}, + {EMMC_DATA5, (PTU | IEN | M0)}, + {EMMC_DATA6, (PTU | IEN | M0)}, + {EMMC_DATA7, (PTU | IEN | M0)}, + {C2C_CLKOUT0, (M0)}, + {C2C_CLKOUT1, (M0)}, + {C2C_CLKIN0, (IEN | M0)}, + {C2C_CLKIN1, (IEN | M0)}, + {C2C_DATAIN0, (IEN | M0)}, + {C2C_DATAIN1, (IEN | M0)}, + {C2C_DATAIN2, (IEN | M0)}, + {C2C_DATAIN3, (IEN | M0)}, + {C2C_DATAIN4, (IEN | M0)}, + {C2C_DATAIN5, (IEN | M0)}, + {C2C_DATAIN6, (IEN | M0)}, + {C2C_DATAIN7, (IEN | M0)}, + {C2C_DATAOUT0, (M0)}, + {C2C_DATAOUT1, (M0)}, + {C2C_DATAOUT2, (M0)}, + {C2C_DATAOUT3, (M0)}, + {C2C_DATAOUT4, (M0)}, + {C2C_DATAOUT5, (M0)}, + {C2C_DATAOUT6, (M0)}, + {C2C_DATAOUT7, (M0)}, + {C2C_DATA8, (IEN | M0)}, + {C2C_DATA9, (IEN | M0)}, + {C2C_DATA10, (IEN | M0)}, + {C2C_DATA11, (IEN | M0)}, + {C2C_DATA12, (IEN | M0)}, + {C2C_DATA13, (IEN | M0)}, + {C2C_DATA14, (IEN | M0)}, + {C2C_DATA15, (IEN | M0)}, + {LLIB_WAKEREQOUT, (PTU | IEN | M6)}, + {LLIA_WAKEREQOUT, (M1)}, + {HSI1_ACREADY, (PTD | M6)}, + {HSI1_CAREADY, (PTD | M6)}, + {HSI1_ACWAKE, (PTD | IEN | M6)}, + {HSI1_CAWAKE, (PTU | IEN | M6)}, + {HSI1_ACFLAG, (PTD | IEN | M6)}, + {HSI1_ACDATA, (PTD | M6)}, + {HSI1_CAFLAG, (M6)}, + {HSI1_CADATA, (M6)}, + {UART1_TX, (M0)}, + {UART1_CTS, (PTU | IEN | M0)}, + {UART1_RX, (PTU | IEN | M0)}, + {UART1_RTS, (M0)}, + {HSI2_CAREADY, (IEN | M0)}, + {HSI2_ACREADY, (M0)}, + {HSI2_CAWAKE, (IEN | M0)}, + {HSI2_ACWAKE, (M0)}, + {HSI2_CAFLAG, (IEN | M0)}, + {HSI2_CADATA, (IEN | M0)}, + {HSI2_ACFLAG, (M0)}, + {HSI2_ACDATA, (M0)}, + {UART2_RTS, (IEN | M1)}, + {UART2_CTS, (IEN | M1)}, + {UART2_RX, (IEN | M1)}, + {UART2_TX, (IEN | M1)}, + {USBB1_HSIC_STROBE, (PTU | IEN | M0)}, + {USBB1_HSIC_DATA, (PTU | IEN | M0)}, + {USBB2_HSIC_STROBE, (PTU | IEN | M0)}, + {USBB2_HSIC_DATA, (PTU | IEN | M0)}, + {TIMER10_PWM_EVT, (IEN | M0)}, + {DSIPORTA_TE0, (IEN | M0)}, + {DSIPORTA_LANE0X, (IEN | M0)}, + {DSIPORTA_LANE0Y, (IEN | M0)}, + {DSIPORTA_LANE1X, (IEN | M0)}, + {DSIPORTA_LANE1Y, (IEN | M0)}, + {DSIPORTA_LANE2X, (IEN | M0)}, + {DSIPORTA_LANE2Y, (IEN | M0)}, + {DSIPORTA_LANE3X, (IEN | M0)}, + {DSIPORTA_LANE3Y, (IEN | M0)}, + {DSIPORTA_LANE4X, (IEN | M0)}, + {DSIPORTA_LANE4Y, (IEN | M0)}, + {DSIPORTC_LANE0X, (IEN | M0)}, + {DSIPORTC_LANE0Y, (IEN | M0)}, + {DSIPORTC_LANE1X, (IEN | M0)}, + {DSIPORTC_LANE1Y, (IEN | M0)}, + {DSIPORTC_LANE2X, (IEN | M0)}, + {DSIPORTC_LANE2Y, (IEN | M0)}, + {DSIPORTC_LANE3X, (IEN | M0)}, + {DSIPORTC_LANE3Y, (IEN | M0)}, + {DSIPORTC_LANE4X, (IEN | M0)}, + {DSIPORTC_LANE4Y, (IEN | M0)}, + {DSIPORTC_TE0, (IEN | M0)}, + {TIMER9_PWM_EVT, (IEN | M0)}, + {I2C4_SCL, (IEN | M0)}, + {I2C4_SDA, (IEN | M0)}, + {MCSPI2_CLK, (IEN | M0)}, + {MCSPI2_SIMO, (IEN | M0)}, + {MCSPI2_SOMI, (PTU | IEN | M0)}, + {MCSPI2_CS0, (M0)}, + {RFBI_DATA15, (M4)}, + {RFBI_DATA14, (M4)}, + {RFBI_DATA13, (PTU | IEN | M6)}, + {RFBI_DATA12, (PTD | M6)}, + {RFBI_DATA11, (PTD | M6)}, + {RFBI_DATA10, (PTD | M6)}, + {RFBI_DATA9, (PTD | M6)}, + {RFBI_DATA8, (M4)}, + {RFBI_DATA7, (PTD | M6)}, + {RFBI_DATA6, (PTD | M6)}, + {RFBI_DATA5, (IEN | M6)}, + {RFBI_DATA4, (IEN | M6)}, + {RFBI_DATA3, (PTD | IEN | M6)}, + {RFBI_DATA2, (PTD | M6)}, + {RFBI_DATA1, (PTD | M6)}, + {RFBI_DATA0, (PTD | M6)}, + {RFBI_WE, (PTD | M6)}, + {MCSPI2_CS0, (M0)}, + {RFBI_A0, (PTD | IEN | M6)}, + {RFBI_RE, (M4)}, + {RFBI_HSYNC0, (M4)}, + {RFBI_TE_VSYNC0, (PTD | M6)}, + {GPIO6_182, (M6)}, + {GPIO6_183, (PTD | M6)}, + {GPIO6_184, (M4)}, + {GPIO6_185, (PTD | IEN | M6)}, + {GPIO6_186, (PTD | M6)}, + {GPIO6_187, (PTU | IEN | M4)}, + {HDMI_CEC, (IEN | M0)}, + {HDMI_HPD, (PTD | IEN | M0)}, + {HDMI_DDC_SCL, (IEN | M0)}, + {HDMI_DDC_SDA, (IEN | M0)}, + {CSIPORTC_LANE0X, (IEN | M0)}, + {CSIPORTC_LANE0Y, (IEN | M0)}, + {CSIPORTC_LANE1X, (IEN | M0)}, + {CSIPORTC_LANE1Y, (IEN | M0)}, + {CSIPORTB_LANE0X, (IEN | M0)}, + {CSIPORTB_LANE0Y, (IEN | M0)}, + {CSIPORTB_LANE1X, (IEN | M0)}, + {CSIPORTB_LANE1Y, (IEN | M0)}, + {CSIPORTB_LANE2X, (IEN | M0)}, + {CSIPORTB_LANE2Y, (IEN | M0)}, + {CSIPORTB_LANE0X, (IEN | M0)}, + {CSIPORTB_LANE0Y, (IEN | M0)}, + {CSIPORTA_LANE1X, (IEN | M0)}, + {CSIPORTA_LANE1Y, (IEN | M0)}, + {CSIPORTA_LANE2X, (IEN | M0)}, + {CSIPORTA_LANE2Y, (IEN | M0)}, + {CSIPORTA_LANE3X, (IEN | M0)}, + {CSIPORTA_LANE3Y, (IEN | M0)}, + {CSIPORTA_LANE4X, (IEN | M0)}, + {CSIPORTA_LANE4Y, (IEN | M0)}, + {CAM_SHUTTER, (M0)}, + {CAM_STROBE, (M0)}, + {CAM_GLOBALRESET, (IEN | M0)}, + {TIMER11_PWM_EVT, (PTD | M6)}, + {TIMER5_PWM_EVT, (PTD | M6)}, + {TIMER6_PWM_EVT, (PTD | M6)}, + {TIMER8_PWM_EVT, (PTU | M6)}, + {I2C3_SCL, (IEN | M0)}, + {I2C3_SDA, (IEN | M0)}, + {GPIO8_233, (IEN | M2)}, + {GPIO8_234, (IEN | M3)}, + {ABE_CLKS, (IEN | M0)}, + {ABEDMIC_DIN1, (IEN | M0)}, + {ABEDMIC_DIN2, (IEN | M0)}, + {ABEDMIC_DIN3, (IEN | M0)}, + {ABEDMIC_CLK1, (M0)}, + {ABEDMIC_CLK2, (IEN | M1)}, + {ABEDMIC_CLK3, (M1)}, + {ABESLIMBUS1_CLOCK, (IEN | M1)}, + {ABESLIMBUS1_DATA, (IEN | M1)}, + {ABEMCBSP2_DR, (IEN | M0)}, + {ABEMCBSP2_DX, (M0)}, + {ABEMCBSP2_FSX, (IEN | M0)}, + {ABEMCBSP2_CLKX, (IEN | M0)}, + {ABEMCPDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, + {ABEMCPDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, + {ABEMCPDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, + {ABEMCPDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, + {WLSDIO_CLK, (PTU | IEN | M0)}, + {WLSDIO_CMD, (PTU | IEN | M0)}, + {WLSDIO_DATA0, (PTU | IEN | M0)}, + {WLSDIO_DATA1, (PTU | IEN | M0)}, + {WLSDIO_DATA2, (PTU | IEN | M0)}, + {WLSDIO_DATA3, (PTU | IEN | M0)}, + {UART5_RX, (PTU | IEN | M0)}, + {UART5_TX, (M0)}, + {UART5_CTS, (PTU | IEN | M0)}, + {UART5_RTS, (M0)}, + {I2C2_SCL, (IEN | M0)}, + {I2C2_SDA, (IEN | M0)}, + {MCSPI1_CLK, (M6)}, + {MCSPI1_SOMI, (IEN | M6)}, + {MCSPI1_SIMO, (PTD | M6)}, + {MCSPI1_CS0, (PTD | M6)}, + {MCSPI1_CS1, (PTD | IEN | M6)}, + {I2C5_SCL, (IEN | M0)}, + {I2C5_SDA, (IEN | M0)}, + {PERSLIMBUS2_CLOCK, (PTD | M6)}, + {PERSLIMBUS2_DATA, (PTD | IEN | M6)}, + {UART6_TX, (PTU | IEN | M6)}, + {UART6_RX, (PTU | IEN | M6)}, + {UART6_CTS, (PTU | IEN | M6)}, + {UART6_RTS, (PTU | M0)}, + {UART3_CTS_RCTX, (PTU | IEN | M6)}, + {UART3_RTS_IRSD, (PTU | IEN | M1)}, + {UART3_RX_IRRX, (PTU | IEN | M0)}, + {UART3_TX_IRTX, (M0)}, + {USBB3_HSIC_STROBE, (PTU | IEN | M0)}, + {USBB3_HSIC_DATA, (PTU | IEN | M0)}, + {SDCARD_CLK, (PTU | IEN | M0)}, + {SDCARD_CMD, (PTU | IEN | M0)}, + {SDCARD_DATA2, (PTU | IEN | M0)}, + {SDCARD_DATA3, (PTU | IEN | M0)}, + {SDCARD_DATA0, (PTU | IEN | M0)}, + {SDCARD_DATA1, (PTU | IEN | M0)}, + {USBD0_HS_DP, (IEN | M0)}, + {USBD0_HS_DM, (IEN | M0)}, + {I2C1_PMIC_SCL, (PTU | IEN | M0)}, + {I2C1_PMIC_SDA, (PTU | IEN | M0)}, + {USBD0_SS_RX, (IEN | M0)}, +}; + +static const struct pad_conf_entry wkup_padconf_array[] = { + {LLIA_WAKEREQIN, (IEN | M1)}, + {LLIB_WAKEREQIN, (IEN | M1)}, + {DRM_EMU0, (PTU | IEN | M0)}, + {DRM_EMU1, (PTU | IEN | M0)}, + {JTAG_NTRST, (IEN | M0)}, + {JTAG_TCK, (IEN | M0)}, + {JTAG_RTCK, (M0)}, + {JTAG_TMSC, (IEN | M0)}, + {JTAG_TDI, (IEN | M0)}, + {JTAG_TDO, (M0)}, + {SYS_32K, (IEN | M0)}, + {FREF_CLK_IOREQ, (IEN | M0)}, + {FREF_CLK0_OUT, (M0)}, + {FREF_CLK1_OUT, (M0)}, + {FREF_CLK2_OUT, (M0)}, + {FREF_CLK2_REQ, (PTU | IEN | M6)}, + {FREF_CLK1_REQ, (PTD | IEN | M6)}, + {SYS_NRESPWRON, (IEN | M0)}, + {SYS_NRESWARM, (PTU | IEN | M0)}, + {SYS_PWR_REQ, (M0)}, + {SYS_NIRQ1, (PTU | IEN | M0)}, + {SYS_NIRQ2, (PTU | IEN | M0)}, + {SR_PMIC_SCL, (PTU | IEN | M0)}, + {SR_PMIC_SDA, (PTU | IEN | M0)}, + {SYS_BOOT0, (IEN | M0)}, + {SYS_BOOT1, (IEN | M0)}, + {SYS_BOOT2, (IEN | M0)}, + {SYS_BOOT3, (IEN | M0)}, + {SYS_BOOT4, (IEN | M0)}, + {SYS_BOOT5, (IEN | M0)}, +}; + +void set_muxconf_regs(void) +{ + omap5_do_set_mux(OMAP54XX_CONTROL_PADCONF_CORE, core_padconf_array, + ARRAY_SIZE(core_padconf_array)); + omap5_do_set_mux(OMAP54XX_CONTROL_PADCONF_WKUP, wkup_padconf_array, + ARRAY_SIZE(wkup_padconf_array)); +} diff --git a/arch/arm/configs/omap5_sevm_defconfig b/arch/arm/configs/omap5_sevm_defconfig new file mode 100644 index 0000000..5cd51bb --- /dev/null +++ b/arch/arm/configs/omap5_sevm_defconfig @@ -0,0 +1,68 @@ +CONFIG_ARCH_OMAP=y +CONFIG_ARCH_OMAP5=y +CONFIG_MACH_OMAP5_SEVM=y +CONFIG_AEABI=y +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y +CONFIG_ARM_UNWIND=y +CONFIG_MMU=y +CONFIG_TEXT_BASE=0x8f000000 +CONFIG_MALLOC_SIZE=0x2000000 +CONFIG_MALLOC_TLSF=y +CONFIG_KALLSYMS=y +CONFIG_PROMPT="barebox> " +CONFIG_LONGHELP=y +CONFIG_GLOB=y +CONFIG_HUSH_FANCY_PROMPT=y +CONFIG_CMDLINE_EDITING=y +CONFIG_AUTO_COMPLETE=y +# CONFIG_TIMESTAMP is not set +CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/omap5_sevm/env" +CONFIG_CMD_EDIT=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_LOADENV=y +CONFIG_CMD_EXPORT=y +CONFIG_CMD_PRINTENV=y +CONFIG_CMD_READLINE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_ECHO_E=y +CONFIG_CMD_LOADB=y +CONFIG_CMD_IOMEM=y +CONFIG_CMD_FLASH=y +CONFIG_CMD_BOOTM_SHOW_TYPE=y +CONFIG_CMD_BOOTM_VERBOSE=y +CONFIG_CMD_BOOTM_INITRD=y +CONFIG_CMD_BOOTM_OFTREE=y +# CONFIG_CMD_BOOTU is not set +CONFIG_CMD_RESET=y +CONFIG_CMD_GO=y +CONFIG_CMD_TIMEOUT=y +CONFIG_CMD_PARTITION=y +CONFIG_CMD_MAGICVAR=y +CONFIG_CMD_MAGICVAR_HELP=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_UNCOMPRESS=y +CONFIG_NET=y +CONFIG_NET_DHCP=y +CONFIG_NET_NFS=y +CONFIG_NET_PING=y +CONFIG_CMD_TFTP=y +CONFIG_FS_TFTP=y +CONFIG_DRIVER_SERIAL_NS16550=y +CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y +CONFIG_DRIVER_NET_SMC911X=y +# CONFIG_SPI is not set +CONFIG_MTD=y +CONFIG_NAND=y +CONFIG_NAND_OMAP_GPMC=y +CONFIG_UBI=y +CONFIG_MCI=y +CONFIG_MCI_STARTUP=y +CONFIG_MCI_OMAP_HSMMC=y +CONFIG_FS_FAT=y +CONFIG_FS_FAT_WRITE=y +CONFIG_FS_FAT_LFN=y +CONFIG_ZLIB=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/omap5_sevm_xload_defconfig b/arch/arm/configs/omap5_sevm_xload_defconfig new file mode 100644 index 0000000..2c47c87 --- /dev/null +++ b/arch/arm/configs/omap5_sevm_xload_defconfig @@ -0,0 +1,44 @@ +CONFIG_ARCH_OMAP=y +CONFIG_ARCH_OMAP5=y +CONFIG_OMAP_BUILD_IFT=y +CONFIG_MACH_OMAP5_SEVM=y +CONFIG_AEABI=y +CONFIG_THUMB2_BAREBOX=y +# CONFIG_CMD_ARM_CPUINFO is not set +# CONFIG_ARM_EXCEPTIONS is not set +CONFIG_MMU=y +CONFIG_TEXT_BASE=0x40300000 +CONFIG_MEMORY_LAYOUT_FIXED=y +CONFIG_STACK_BASE=0x8f000000 +CONFIG_MALLOC_BASE=0x84000000 +CONFIG_MALLOC_SIZE=0x2000000 +CONFIG_MALLOC_DUMMY=y +CONFIG_PROMPT="barebox> " +CONFIG_SHELL_NONE=y +# CONFIG_ERRNO_MESSAGES is not set +# CONFIG_TIMESTAMP is not set +# CONFIG_CONSOLE_FULL is not set +# CONFIG_DEFAULT_ENVIRONMENT is not set +# CONFIG_DRIVER_SERIAL_NS16550 is not set +# CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS is not set +# CONFIG_SPI is not set +# CONFIG_MTD is not set +# CONFIG_MTD_WRITE is not set +# CONFIG_MTD_OOB_DEVICE is not set +CONFIG_NAND=y +# CONFIG_NAND_ECC_SOFT is not set +# CONFIG_NAND_ECC_HW_SYNDROME is not set +# CONFIG_NAND_ECC_HW_NONE is not set +# CONFIG_NAND_INFO is not set +# CONFIG_NAND_BBT is not set +CONFIG_NAND_OMAP_GPMC=y +CONFIG_MCI=y +CONFIG_MCI_STARTUP=y +# CONFIG_MCI_WRITE is not set +CONFIG_MCI_OMAP_HSMMC=y +# CONFIG_FS_RAMFS is not set +# CONFIG_FS_DEVFS is not set +CONFIG_FS_FAT=y +# CONFIG_DEBUG_LL is not set +# CONFIG_BANNER is not set +# CONFIG_MEMINFO is not set diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig index 42e5f4a..0ad3864 100644 --- a/arch/arm/mach-omap/Kconfig +++ b/arch/arm/mach-omap/Kconfig @@ -41,6 +41,14 @@ config ARCH_OMAP4 help Say Y here if you are using Texas Instrument's OMAP4 based platform +config ARCH_OMAP5 + bool "OMAP5" + select CPU_V7 + select GENERIC_GPIO + select OMAP_CLOCK_SOURCE_S32K + help + Say Y here if you are using Texas Instrument's OMAP5 based platform + config ARCH_AM33XX bool "AM33xx" select CPU_V7 @@ -115,6 +123,7 @@ config BOARDINFO default "Phytec phyCARD-A-L1" if MACH_PCAAL1 default "Phytec phyCARD-A-XL2" if MACH_PCAAXL2 default "Phytec phyCORE-AM335x" if MACH_PCM051 + default "Phytec phyCORE omap5_sevm" if MACH_OMAP5_SEVM choice prompt "Select OMAP board" @@ -177,6 +186,13 @@ config MACH_PCAAXL2 help Say Y here if you are using a phyCARD-A-XL1 PCA-A-XL1 +config MACH_OMAP5_SEVM + bool "Phytec phyCORE omap5_sevm" + depends on ARCH_OMAP5 + help + Say Y here if you are using Phytecs phyCORE omap5_sevm board + based on OMAP5 + config MACH_PCM051 bool "Phytec phyCORE pcm051" select OMAP_CLOCK_ALL diff --git a/arch/arm/mach-omap/Makefile b/arch/arm/mach-omap/Makefile index d9e00f7..e65353f 100644 --- a/arch/arm/mach-omap/Makefile +++ b/arch/arm/mach-omap/Makefile @@ -23,6 +23,8 @@ obj-$(CONFIG_ARCH_OMAP3) += omap3_generic.o auxcr.o pbl-$(CONFIG_ARCH_OMAP3) += omap3_generic.o auxcr.o obj-$(CONFIG_ARCH_OMAP4) += omap4_generic.o omap4_clock.o pbl-$(CONFIG_ARCH_OMAP4) += omap4_generic.o omap4_clock.o +obj-$(CONFIG_ARCH_OMAP5) += omap5_generic.o omap5_clock.o +pbl-$(CONFIG_ARCH_OMAP5) += omap5_generic.o omap5_clock.o obj-$(CONFIG_ARCH_AM33XX) += am33xx_generic.o am33xx_clock.o am33xx_mux.o obj-$(CONFIG_OMAP3_CLOCK_CONFIG) += omap3_clock.o pbl-$(CONFIG_OMAP3_CLOCK_CONFIG) += omap3_clock.o diff --git a/arch/arm/mach-omap/gpmc.c b/arch/arm/mach-omap/gpmc.c index bb84b38..1620f0f 100644 --- a/arch/arm/mach-omap/gpmc.c +++ b/arch/arm/mach-omap/gpmc.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -39,6 +40,8 @@ static int gpmc_init(void) omap_gpmc_base = (void *)OMAP3_GPMC_BASE; #elif defined(CONFIG_ARCH_OMAP4) omap_gpmc_base = (void *)OMAP44XX_GPMC_BASE; +#elif defined(CONFIG_ARCH_OMAP5) + omap_gpmc_base = (void *)OMAP54XX_GPMC_BASE; #elif defined(CONFIG_ARCH_AM33XX) omap_gpmc_base = (void *)AM33XX_GPMC_BASE; #else diff --git a/arch/arm/mach-omap/include/mach/debug_ll.h b/arch/arm/mach-omap/include/mach/debug_ll.h index 38ca562..473d8f4 100644 --- a/arch/arm/mach-omap/include/mach/debug_ll.h +++ b/arch/arm/mach-omap/include/mach/debug_ll.h @@ -39,6 +39,11 @@ #endif #endif +#ifdef CONFIG_ARCH_OMAP5 +#include +#define UART_BASE OMAP54XX_UART3_BASE +#endif + #ifdef CONFIG_ARCH_AM33XX #include #define UART_BASE AM33XX_UART0_BASE diff --git a/arch/arm/mach-omap/include/mach/generic.h b/arch/arm/mach-omap/include/mach/generic.h index 7455404..f4917ba 100644 --- a/arch/arm/mach-omap/include/mach/generic.h +++ b/arch/arm/mach-omap/include/mach/generic.h @@ -27,6 +27,12 @@ #define cpu_is_omap4xxx() (0) #endif +#ifdef CONFIG_ARCH_OMAP5 +#define cpu_is_omap5xxx() (1) +#else +#define cpu_is_omap5xxx() (0) +#endif + enum omap_boot_src { OMAP_BOOTSRC_UNKNOWN, OMAP_BOOTSRC_MMC1, @@ -39,5 +45,6 @@ enum omap_boot_src omap_bootsrc(void); enum omap_boot_src am33xx_bootsrc(void); enum omap_boot_src omap3_bootsrc(void); enum omap_boot_src omap4_bootsrc(void); +enum omap_boot_src omap5_bootsrc(void); #endif diff --git a/arch/arm/mach-omap/include/mach/gpmc_nand.h b/arch/arm/mach-omap/include/mach/gpmc_nand.h index 4a93465..5fe6d0f 100644 --- a/arch/arm/mach-omap/include/mach/gpmc_nand.h +++ b/arch/arm/mach-omap/include/mach/gpmc_nand.h @@ -65,5 +65,6 @@ int omap_add_gpmc_nand_device(struct gpmc_nand_platform_data *pdata); extern struct gpmc_config omap3_nand_cfg; extern struct gpmc_config omap4_nand_cfg; +extern struct gpmc_config omap5_nand_cfg; #endif /* __ASM_OMAP_NAND_GPMC_H */ diff --git a/arch/arm/mach-omap/include/mach/omap5-clock.h b/arch/arm/mach-omap/include/mach/omap5-clock.h new file mode 100644 index 0000000..9d9f9a4 --- /dev/null +++ b/arch/arm/mach-omap/include/mach/omap5-clock.h @@ -0,0 +1,444 @@ +/* + * (C) Copyright 2013 + * Sam Solutions, + * + * Authors: + * Uladzimir Bely + * Dmitry Lavnikevich + */ + +#define OMAP_543X_REV_1_0 1 + +/* CKGEN_PRM Registers */ +#define CM_CLKSEL_ABE_DSS_SYS 0x4ae06100 +#define CM_CLKSEL_WKUPAON (CM_CLKSEL_ABE_DSS_SYS + 0x0008) +#define CM_CLKSEL_ABE_PLL_REF (CM_CLKSEL_ABE_DSS_SYS + 0x000C) +#define CM_CLKSEL_SYS (CM_CLKSEL_ABE_DSS_SYS + 0x0010) + +#define CM_CLKSEL_SYS_12M0 0x1 /* 12.0MHz */ +/* Reserved 0x2 */ +#define CM_CLKSEL_SYS_16M8 0x3 /* 16.8MHz */ +#define CM_CLKSEL_SYS_19M2 0x4 /* 19.2MHz */ +#define CM_CLKSEL_SYS_26M0 0x5 /* 26.0MHz */ +/* Reserved 0x6 */ +#define CM_CLKSEL_SYS_38M4 0x7 /* 38.4MHz */ + +/* WKUPAON_CM Registers */ +#define CM_WKUPAON_CLKCTRL_REV1 0x4ae07800 +#define CM_WKUPAON_CLKCTRL_REV2 0x4ae07900 +#define CM_WKUPAON_L4_WKUP_CLKCTRL_OFT 0x0020 +#define CM_WKUPAON_WD_TIMER2_CLKCTRL_OFT 0x0030 +#define CM_WKUPAON_GPIO1_CLKCTRL_OFT 0x0038 +#define CM_WKUPAON_TIMER1_CLKCTRL_OFT 0x0040 +#define CM_WKUPAON_COUNTER_32K_CLKCTRL_OFT 0x0050 +#define CM_WKUPAON_SAR_RAM_CLKCTRL_OFT 0x0060 +#define CM_WKUPAON_KBD_CLKCTRL_OFT 0x0078 +#define CM_WKUPAON_SCRM_CLKCTRL_OFT 0x0090 +#define CM_WKUPAON_IO_SRCOMP_CLKCTRL_OFT 0x0098 + +/* CKGEN_CM_CORE_AON Registers */ +#define CM_BASE 0x4a004100 +#define CM_CLKSEL_CORE CM_BASE +#define CM_CLKSEL_ABE (CM_BASE + 0x0008) +#define CM_DLL_CTRL (CM_BASE + 0x0010) +#define CM_CLKMODE_DPLL_CORE (CM_BASE + 0x0020) +#define CM_IDLEST_DPLL_CORE (CM_BASE + 0x0024) +#define CM_AUTOIDLE_DPLL_CORE (CM_BASE + 0x0028) +#define CM_CLKSEL_DPLL_CORE (CM_BASE + 0x002c) +#define CM_DIV_M2_DPLL_CORE (CM_BASE + 0x0030) +#define CM_DIV_M3_DPLL_CORE (CM_BASE + 0x0034) +#define CM_DIV_H11_DPLL_CORE (CM_BASE + 0x0038) +#define CM_DIV_H12_DPLL_CORE (CM_BASE + 0x003c) +#define CM_DIV_H13_DPLL_CORE (CM_BASE + 0x0040) +#define CM_DIV_H14_DPLL_CORE (CM_BASE + 0x0044) +#define CM_SSC_DELTAMSTEP_DPLL_CORE (CM_BASE + 0x0048) +#define CM_SSC_MODFREQDIV_DPLL_CORE (CM_BASE + 0x004c) +#define CM_DIV_H21_DPLL_CORE (CM_BASE + 0x0050) /* For rev. 2 */ +#define CM_DIV_H22_DPLL_CORE (CM_BASE + 0x0054) +#define CM_DIV_H23_DPLL_CORE (CM_BASE + 0x0058) +#define CM_DIV_H24_DPLL_CORE (CM_BASE + 0x005c) /* For rev. 2 */ +#define CM_CLKMODE_DPLL_MPU (CM_BASE + 0x0060) +#define CM_IDLEST_DPLL_MPU (CM_BASE + 0x0064) +#define CM_AUTOIDLE_DPLL_MPU (CM_BASE + 0x0068) +#define CM_CLKSEL_DPLL_MPU (CM_BASE + 0x006c) +#define CM_DIV_M2_DPLL_MPU (CM_BASE + 0x0070) +#define CM_SSC_DELTAMSTEP_DPLL_MPU (CM_BASE + 0x0088) +#define CM_SSC_MODFREQDIV_DPLL_MPU (CM_BASE + 0x008c) +#define CM_BYPCLK_DPLL_MPU (CM_BASE + 0x009c) +#define CM_CLKMODE_DPLL_IVA (CM_BASE + 0x00a0) +#define CM_IDLEST_DPLL_IVA (CM_BASE + 0x00a4) +#define CM_AUTOIDLE_DPLL_IVA (CM_BASE + 0x00a8) +#define CM_CLKSEL_DPLL_IVA (CM_BASE + 0x00ac) +#define CM_DIV_H11_DPLL_IVA (CM_BASE + 0x00b8) +#define CM_DIV_H12_DPLL_IVA (CM_BASE + 0x00bc) +#define CM_SSC_DELTAMSTEP_DPLL_IVA (CM_BASE + 0x00c8) +#define CM_SSC_MODFREQDIV_DPLL_IVA (CM_BASE + 0x00cc) +#define CM_BYPCLK_DPLL_IVA (CM_BASE + 0x00dc) +#define CM_CLKMODE_DPLL_ABE (CM_BASE + 0x00e0) +#define CM_IDLEST_DPLL_ABE (CM_BASE + 0x00e4) +#define CM_AUTOIDLE_DPLL_ABE (CM_BASE + 0x00e8) +#define CM_CLKSEL_DPLL_ABE (CM_BASE + 0x00ec) +#define CM_DIV_M2_DPLL_ABE (CM_BASE + 0x00f0) +#define CM_DIV_M3_DPLL_ABE (CM_BASE + 0x00f4) +#define CM_SSC_DELTAMSTEP_DPLL_ABE (CM_BASE + 0x0108) +#define CM_SSC_MODFREQDIV_DPLL_ABE (CM_BASE + 0x010c) +#define CM_SHADOW_FREQ_CONFIG1 (CM_BASE + 0x0160) +#define CM_SHADOW_FREQ_CONFIG2 (CM_BASE + 0x0164) +#define CM_DYN_DEP_PRESCAL (CM_BASE + 0x0170) +#define CM_RESTORE_ST (CM_BASE + 0x0180) + +/* DSP_CM_CORE_AON Registers */ +#define CM_DSP_CLKSTCTRL 0x4a004400 +#define CM_DSP_STATICDEP (CM_DSP_CLKSTCTRL + 0x0004) +#define CM_DSP_DYNAMICDEP (CM_DSP_CLKSTCTRL + 0x0008) +#define CM_DSP_DSP_CLKCTRL (CM_DSP_CLKSTCTRL + 0x0020) + +/* ABE_CM_CORE_AON Registers */ +#define ABE_BASE 0x4a004500 +#define CM_ABE_CLKSTCTRL ABE_BASE +#define CM_ABE_L4_ABE_CLKCTRL (ABE_BASE + 0x0020) +#define CM_ABE_AESS_CLKCTRL (ABE_BASE + 0x0028) +#define CM_ABE_MCPDM_CLKCTRL (ABE_BASE + 0x0030) +#define CM_ABE_DMIC_CLKCTRL (ABE_BASE + 0x0038) +#define CM_ABE_MCASP_CLKCTRL (ABE_BASE + 0x0040) +#define CM_ABE_MCBSP1_CLKCTRL (ABE_BASE + 0x0048) +#define CM_ABE_MCBSP2_CLKCTRL (ABE_BASE + 0x0050) +#define CM_ABE_MCBSP3_CLKCTRL (ABE_BASE + 0x0058) +#define CM_ABE_SLIMBUS1_CLKCTRL (ABE_BASE + 0x0060) +#define CM_ABE_TIMER5_CLKCTRL (ABE_BASE + 0x0068) +#define CM_ABE_TIMER6_CLKCTRL (ABE_BASE + 0x0070) +#define CM_ABE_TIMER7_CLKCTRL (ABE_BASE + 0x0078) +#define CM_ABE_TIMER8_CLKCTRL (ABE_BASE + 0x0080) +#define CM_ABE_WD_TIMER3_CLKCTRL (ABE_BASE + 0x0088) + +/* CKGEN_CM_CORE Registers */ +#define CKGEN_BASE 0x4a008100 +#define CM_CLKSEL_USB_60MHZ (CKGEN_BASE + 0x0004) +#define CM_CLKMODE_DPLL_PER (CKGEN_BASE + 0x0040) +#define CM_IDLEST_DPLL_PER (CKGEN_BASE + 0x0044) +#define CM_AUTOIDLE_DPLL_PER (CKGEN_BASE + 0x0048) +#define CM_CLKSEL_DPLL_PER (CKGEN_BASE + 0x004c) +#define CM_DIV_M2_DPLL_PER (CKGEN_BASE + 0x0050) +#define CM_DIV_M3_DPLL_PER (CKGEN_BASE + 0x0054) +#define CM_DIV_H11_DPLL_PER (CKGEN_BASE + 0x0058) +#define CM_DIV_H12_DPLL_PER (CKGEN_BASE + 0x005c) +#define CM_DIV_H14_DPLL_PER (CKGEN_BASE + 0x0064) +#define CM_SSC_DELTAMSTEP_DPLL_PER (CKGEN_BASE + 0x0068) +#define CM_SSC_MODFREQDIV_DPLL_PER (CKGEN_BASE + 0x006c) +#define CM_CLKMODE_DPLL_USB (CKGEN_BASE + 0x0080) +#define CM_IDLEST_DPLL_USB (CKGEN_BASE + 0x0084) +#define CM_AUTOIDLE_DPLL_USB (CKGEN_BASE + 0x0088) +#define CM_CLKSEL_DPLL_USB (CKGEN_BASE + 0x008c) +#define CM_DIV_M2_DPLL_USB (CKGEN_BASE + 0x0090) +#define CM_SSC_DELTAMSTEP_DPLL_USB (CKGEN_BASE + 0x00a8) +#define CM_SSC_MODFREQDIV_DPLL_USB (CKGEN_BASE + 0x00ac) +#define CM_CLKDCOLDO_DPLL_USB (CKGEN_BASE + 0x00b4) +#define CM_CLKMODE_DPLL_UNIPRO2 (CKGEN_BASE + 0x00c0) +#define CM_IDLEST_DPLL_UNIPRO2 (CKGEN_BASE + 0x00c4) +#define CM_AUTOIDLE_DPLL_UNIPRO2 (CKGEN_BASE + 0x00c8) +#define CM_CLKSEL_DPLL_UNIPRO2 (CKGEN_BASE + 0x00cc) +#define CM_DIV_M2_DPLL_UNIPRO2 (CKGEN_BASE + 0x00d0) +#define CM_SSC_DELTAMSTEP_DPLL_UNIPRO2 (CKGEN_BASE + 0x00e8) +#define CM_SSC_MODFREQDIV_DPLL_UNIPRO2 (CKGEN_BASE + 0x00ec) +#define CM_CLKDCOLDO_DPLL_UNIPRO2 (CKGEN_BASE + 0x00f4) +#define CM_CLKMODE_DPLL_UNIPRO1 (CKGEN_BASE + 0x0100) +#define CM_IDLEST_DPLL_UNIPRO1 (CKGEN_BASE + 0x0104) +#define CM_AUTOIDLE_DPLL_UNIPRO1 (CKGEN_BASE + 0x0108) +#define CM_CLKSEL_DPLL_UNIPRO1 (CKGEN_BASE + 0x010c) +#define CM_DIV_M2_DPLL_UNIPRO1 (CKGEN_BASE + 0x0110) +#define CM_SSC_DELTAMSTEP_DPLL_UNIPRO1 (CKGEN_BASE + 0x0128) +#define CM_SSC_MODFREQDIV_DPLL_UNIPRO1 (CKGEN_BASE + 0x012c) +#define CM_CLKDCOLDO_DPLL_UNIPRO1 (CKGEN_BASE + 0x0134) + +/* CORE_CM_CORE Registers */ +#define CORE_BASE 0x4a008700 +#define CM_L3MAIN1_CLKSTCTRL (CORE_BASE + 0x0000) +#define CM_L3MAIN1_DYNAMICDEP (CORE_BASE + 0x0008) +#define CM_L3MAIN1_L3_MAIN_1_CLKCTRL (CORE_BASE + 0x0020) +#define CM_L3MAIN2_CLKSTCTRL (CORE_BASE + 0x0100) +#define CM_L3MAIN2_DYNAMICDEP (CORE_BASE + 0x0108) +#define CM_L3MAIN2_L3_MAIN_2_CLKCTRL (CORE_BASE + 0x0120) +#define CM_L3MAIN2_GPMC_CLKCTRL (CORE_BASE + 0x0128) +#define CM_L3MAIN2_OCMC_RAM_CLKCTRL (CORE_BASE + 0x0130) +#define CM_IPU_CLKSTCTRL (CORE_BASE + 0x0200) +#define CM_IPU_STATICDEP (CORE_BASE + 0x0204) +#define CM_IPU_DYNAMICDEP (CORE_BASE + 0x0208) +#define CM_IPU_IPU_CLKCTRL (CORE_BASE + 0x0220) +#define CM_DMA_CLKSTCTRL (CORE_BASE + 0x0300) +#define CM_DMA_STATICDEP (CORE_BASE + 0x0304) +#define CM_DMA_DYNAMICDEP (CORE_BASE + 0x0308) +#define CM_DMA_DMA_SYSTEM_CLKCTRL (CORE_BASE + 0x0320) +#define CM_EMIF_CLKSTCTRL (CORE_BASE + 0x0400) +#define CM_EMIF_DMM_CLKCTRL (CORE_BASE + 0x0420) +#define CM_EMIF_EMIF_OCP_FW_CLKCTRL (CORE_BASE + 0x0428) +#define CM_EMIF_EMIF1_CLKCTRL (CORE_BASE + 0x0430) +#define CM_EMIF_EMIF2_CLKCTRL (CORE_BASE + 0x0438) +#define CM_EMIF_EMIF_DLL_CLKCTRL (CORE_BASE + 0x0440) +#define CM_C2C_CLKSTCTRL (CORE_BASE + 0x0500) +#define CM_C2C_STATICDEP (CORE_BASE + 0x0504) +#define CM_C2C_DYNAMICDEP (CORE_BASE + 0x0508) +#define CM_C2C_C2C_CLKCTRL (CORE_BASE + 0x0520) +#define CM_C2C_MODEM_ICR_CLKCTRL (CORE_BASE + 0x0528) +#define CM_C2C_C2C_OCP_FW_CLKCTRL (CORE_BASE + 0x0530) +#define CM_L4CFG_CLKSTCTRL (CORE_BASE + 0x0600) +#define CM_L4CFG_DYNAMICDEP (CORE_BASE + 0x0608) +#define CM_L4CFG_L4_CFG_CLKCTRL (CORE_BASE + 0x0620) +#define CM_L4CFG_SPINLOCK_CLKCTRL (CORE_BASE + 0x0628) +#define CM_L4CFG_MAILBOX_CLKCTRL (CORE_BASE + 0x0630) +#define CM_L4CFG_SAR_ROM_CLKCTRL (CORE_BASE + 0x0638) +#define CM_L4CFG_OCP2SCP2_CLKCTRL (CORE_BASE + 0x0640) +#define CM_L3INSTR_CLKSTCTRL (CORE_BASE + 0x0700) +#define CM_L3INSTR_L3_MAIN_3_CLKCTRL (CORE_BASE + 0x0720) +#define CM_L3INSTR_L3_INSTR_CLKCTRL (CORE_BASE + 0x0728) +#define CM_L3INSTR_OCP_WP_NOC_CLKCTRL (CORE_BASE + 0x0740) +#define CM_L3INSTR_DLL_AGING_CLKCTRL (CORE_BASE + 0x0748) +#define CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL (CORE_BASE + 0x0750) + +/* L4PER_CM_CORE Registers */ +#define CM_L4PER_CLKSTCTRL_REV1 0x4a009400 +#define CM_L4PER_CLKSTCTRL_REV2 0x4a009000 +#define CM_L4PER_DYNAMICDEP_OFT 0x0008 +#define CM_L4PER_TIMER10_CLKCTRL_OFT 0x0028 +#define CM_L4PER_TIMER11_CLKCTRL_OFT 0x0030 +#define CM_L4PER_TIMER2_CLKCTRL_OFT 0x0038 +#define CM_L4PER_TIMER3_CLKCTRL_OFT 0x0040 +#define CM_L4PER_TIMER4_CLKCTRL_OFT 0x0048 +#define CM_L4PER_TIMER9_CLKCTRL_OFT 0x0050 +#define CM_L4PER_ELM_CLKCTRL_OFT 0x0058 +#define CM_L4PER_GPIO2_CLKCTRL_OFT 0x0060 +#define CM_L4PER_GPIO3_CLKCTRL_OFT 0x0068 +#define CM_L4PER_GPIO4_CLKCTRL_OFT 0x0070 +#define CM_L4PER_GPIO5_CLKCTRL_OFT 0x0078 +#define CM_L4PER_GPIO6_CLKCTRL_OFT 0x0080 +#define CM_L4PER_HDQ1W_CLKCTRL_OFT 0x0088 +#define CM_L4PER_I2C1_CLKCTRL_OFT 0x00a0 +#define CM_L4PER_I2C2_CLKCTRL_OFT 0x00a8 +#define CM_L4PER_I2C3_CLKCTRL_OFT 0x00b0 +#define CM_L4PER_I2C4_CLKCTRL_OFT 0x00b8 +#define CM_L4PER_L4_PER_CLKCTRL_OFT 0x00c0 +#define CM_L4PER_MCSPI1_CLKCTRL_OFT 0x00f0 +#define CM_L4PER_MCSPI2_CLKCTRL_OFT 0x00f8 +#define CM_L4PER_MCSPI3_CLKCTRL_OFT 0x0100 +#define CM_L4PER_MCSPI4_CLKCTRL_OFT 0x0108 +#define CM_L4PER_GPIO7_CLKCTRL_OFT 0x0110 +#define CM_L4PER_GPIO8_CLKCTRL_OFT 0x0118 +#define CM_L4PER_MMC3_CLKCTRL_OFT 0x0120 +#define CM_L4PER_MMC4_CLKCTRL_OFT 0x0128 +#define CM_L4PER_SLIMBUS2_CLKCTRL_OFT 0x0138 +#define CM_L4PER_UART1_CLKCTRL_OFT 0x0140 +#define CM_L4PER_UART2_CLKCTRL_OFT 0x0148 +#define CM_L4PER_UART3_CLKCTRL_OFT 0x0150 +#define CM_L4PER_UART4_CLKCTRL_OFT 0x0158 +#define CM_L4PER_MMC5_CLKCTRL_OFT 0x0160 +#define CM_L4PER_I2C5_CLKCTRL_OFT 0x0168 +#define CM_L4PER_UART5_CLKCTRL_OFT 0x0170 +#define CM_L4PER_UART6_CLKCTRL_OFT 0x0178 +#define CM_L4SEC_CLKSTCTRL_OFT 0x0180 +#define CM_L4SEC_STATICDEP_OFT 0x0184 +#define CM_L4SEC_DYNAMICDEP_OFT 0x0188 +#define CM_L4SEC_AES1_CLKCTRL_OFT 0x01a0 +#define CM_L4SEC_AES2_CLKCTRL_OFT 0x01a8 +#define CM_L4SEC_DES3DES_CLKCTRL_OFT 0x01b0 +#define CM_L4SEC_FPKA_OFT 0x01b8 +#define CM_L4SEC_RNG_CLKCTRL_OFT 0x01c0 +#define CM_L4SEC_SHA2MD5_CLKCTRL_OFT 0x01c8 +#define CM_L4SEC_DMA_CRYPTO_CLKCTRL_OFT 0x01d8 + +/* L3INIT_CM_CORE Registers */ +/* OMAP5 revision 1*/ +#define CM_L3INIT_CLKSTCTRL_REV1 0x4a009300 +#define CM_L3INIT_CLKSTCTRL_REV2 0x4a009600 +#define CM_L3INIT_STATICDEP_OFT 0x0004 +#define CM_L3INIT_DYNAMICDEP_OFT 0x0008 +#define CM_L3INIT_MMC1_CLKCTRL_OFT 0x0028 +#define CM_L3INIT_MMC2_CLKCTRL_OFT 0x0030 +#define CM_L3INIT_HSI_CLKCTRL_OFT 0x0038 +#define CM_L3INIT_UNIPRO2_CLKCTRL_OFT 0x0040 +#define CM_L3INIT_MPHY_UNIPRO2_CLKCTRL_OFT 0x0048 +#define CM_L3INIT_USB_HOST_HS_CLKCTRL_OFT 0x0058 +#define CM_L3INIT_USB_TLL_HS_CLKCTRL_OFT 0x0068 +#define CM_L3INIT_IEEE1500_2_OCP_CLKCTRL_OFT 0x0078 +#define CM_L3INIT_SATA_CLKCTRL_OFT 0x0088 +#define CM_L3INIT_OCP2SCP1_CLKCTRL_OFT 0x00E0 +#define CM_L3INIT_OCP2SCP3_CLKCTRL_OFT 0x00E8 +#define CM_L3INIT_USB_OTG_SS_CLKCTRL_OFT 0x00F0 + +/* CAM_CM_CORE Registers */ +#define CM_CAM_CLKSTCTRL_REV1 0x4a009000 +#define CM_CAM_CLKSTCTRL_REV2 0x4a009300 +#define CM_CAM_STATICDEP_OFT 0x0004 +#define CM_CAM_DYNAMICDEP_OFT 0x0008 +#define CM_CAM_ISS_CLKCTRL_OFT 0x0020 +#define CM_CAM_FDIF_CLKCTRL_OFT 0x0028 +#define CM_CAM_CAL_CLKCTRL_OFT 0x0030 + +/* DSS_CM_CORE Registers */ +#define CM_DSS_CLKSTCTRL_REV1 0x4a009100 +#define CM_DSS_CLKSTCTRL_REV2 0x4a009400 +#define CM_DSS_STATICDEP_OFT 0x0004 +#define CM_DSS_DYNAMICDEP_OFT 0x0008 +#define CM_DSS_DSS_CLKCTRL_OFT 0x0020 +#define CM_DSS_BB2D_CLKCTRL_OFT 0x0030 /* For rev. 2 */ + +/* GPU_CM_CORE Registers */ +#define CM_GPU_CLKSTCTRL_REV1 0x4a009200 +#define CM_GPU_CLKSTCTRL_REV2 0x4a009500 +#define CM_GPU_STATICDEP_OFT 0x0004 +#define CM_GPU_DYNAMICDEP_OFT 0x0008 +#define CM_GPU_GPU_CLKCTRL_OFT 0x0020 + +#define PLL_STOP 0x1 +#define PLL_LOW_POWER_BYPASS 0x5 +#define PLL_FAST_RELOCK_BYPASS 0x6 +#define PLL_LOCK 0x7 + +/* TPS */ +#define TPS62361_I2C_SLAVE_ADDR 0x60 +#define TPS62361_REG_ADDR_SET0 0x0 +#define TPS62361_REG_ADDR_SET1 0x1 +#define TPS62361_REG_ADDR_SET2 0x2 +#define TPS62361_REG_ADDR_SET3 0x3 +#define TPS62361_REG_ADDR_CTRL 0x4 +#define TPS62361_REG_ADDR_TEMP 0x5 +#define TPS62361_REG_ADDR_RMP_CTRL 0x6 +#define TPS62361_REG_ADDR_CHIP_ID 0x8 +#define TPS62361_REG_ADDR_CHIP_ID_2 0x9 + +#define TPS62361_BASE_VOLT_MV 500 +#define TPS62361_VSEL0_GPIO 7 + +/* Used to index into DPLL parameter tables */ +struct dpll_param { + unsigned int m; + unsigned int n; + unsigned int m2; + unsigned int m3; + unsigned int h11; + unsigned int h12; + unsigned int h13; + unsigned int h14; + unsigned int h22; + unsigned int h23; +}; + +/* DPLL_MPU Preferred Settings m n m2 m3 h11 h12 h13 h14 h22 h23 */ +/* SYS_CLK = 12.0MHz */ +#define OMAP5_MPU_DPLL_PARAM_12M0_HIGH { 275, 2, 1, 0, 0, 0, 0, 0, 0, 0} +#define OMAP5_MPU_DPLL_PARAM_12M0_NOM { 200, 2, 1, 0, 0, 0, 0, 0, 0, 0} +#define OMAP5_MPU_DPLL_PARAM_12M0_LOW { 200, 2, 2, 0, 0, 0, 0, 0, 0, 0} +/* SYS_CLK = 16.8MHz */ +#define OMAP5_MPU_DPLL_PARAM_16M8_HIGH { 458, 6, 1, 0, 0, 0, 0, 0, 0, 0} +#define OMAP5_MPU_DPLL_PARAM_16M8_NOM { 375, 8, 1, 0, 0, 0, 0, 0, 0, 0} +#define OMAP5_MPU_DPLL_PARAM_16M8_LOW { 375, 8, 2, 0, 0, 0, 0, 0, 0, 0} +/* SYS_CLK = 19.2MHz */ +#define OMAP5_MPU_DPLL_PARAM_19M2_HIGH { 229, 3, 1, 0, 0, 0, 0, 0, 0, 0} +#define OMAP5_MPU_DPLL_PARAM_19M2_NOM {1000, 20, 1, 0, 0, 0, 0, 0, 0, 0} +#define OMAP5_MPU_DPLL_PARAM_19M2_LOW {1000, 20, 2, 0, 0, 0, 0, 0, 0, 0} +/* SYS_CLK = 26.0MHz */ +#define OMAP5_MPU_DPLL_PARAM_26M0_HIGH { 296, 6, 1, 0, 0, 0, 0, 0, 0, 0} +#define OMAP5_MPU_DPLL_PARAM_26M0_NOM { 400, 12, 1, 0, 0, 0, 0, 0, 0, 0} +#define OMAP5_MPU_DPLL_PARAM_26M0_LOW { 400, 12, 2, 0, 0, 0, 0, 0, 0, 0} +/* SYS_CLK = 38.4MHz */ +#define OMAP5_MPU_DPLL_PARAM_38M4_HIGH { 229, 7, 1, 0, 0, 0, 0, 0, 0, 0} +#define OMAP5_MPU_DPLL_PARAM_38M4_NOM { 375, 17, 1, 0, 0, 0, 0, 0, 0, 0} +#define OMAP5_MPU_DPLL_PARAM_38M4_LOW { 375, 17, 2, 0, 0, 0, 0, 0, 0, 0} + +/* DPLL_IVA Preferred Settings m n m2 m3 h11 h12 h13 h14 h22 h23 */ +/* SYS_CLK = 12.0MHz */ +#define OMAP5_IVA_DPLL_PARAM_12M0_OD { 133, 2, 0, 0, 2, 2, 0, 0, 0, 0} +#define OMAP5_IVA_DPLL_PARAM_12M0_NOM {1165, 11, 0, 0, 5, 6, 0, 0, 0, 0} +#define OMAP5_IVA_DPLL_PARAM_12M0_LOW {1165, 11, 0, 0, 10, 12, 0, 0, 0, 0} +/* SYS_CLK = 16.8MHz */ +#define OMAP5_IVA_DPLL_PARAM_16M8_OD { 253, 7, 0, 0, 2, 2, 0, 0, 0, 0} +#define OMAP5_IVA_DPLL_PARAM_16M8_NOM { 208, 2, 0, 0, 5, 6, 0, 0, 0, 0} +#define OMAP5_IVA_DPLL_PARAM_16M8_LOW { 208, 2, 0, 0, 10, 12, 0, 0, 0, 0} +/* SYS_CLK = 19.2MHz */ +#define OMAP5_IVA_DPLL_PARAM_19M2_OD { 83, 2, 0, 0, 2, 2, 0, 0, 0, 0} +#define OMAP5_IVA_DPLL_PARAM_19M2_NOM { 182, 2, 0, 0, 5, 6, 0, 0, 0, 0} +#define OMAP5_IVA_DPLL_PARAM_19M2_LOW { 182, 2, 0, 0, 10, 12, 0, 0, 0, 0} +/* SYS_CLK = 26.0MHz */ +#define OMAP5_IVA_DPLL_PARAM_26M0_OD { 143, 6, 0, 0, 2, 2, 0, 0, 0, 0} +#define OMAP5_IVA_DPLL_PARAM_26M0_NOM { 224, 4, 0, 0, 5, 6, 0, 0, 0, 0} +#define OMAP5_IVA_DPLL_PARAM_26M0_LOW { 224, 4, 0, 0, 10, 12, 0, 0, 0, 0} +/* SYS_CLK = 38.4MHz */ +#define OMAP5_IVA_DPLL_PARAM_38M4_OD { 83, 5, 0, 0, 2, 2, 0, 0, 0, 0} +#define OMAP5_IVA_DPLL_PARAM_38M4_NOM { 91, 2, 0, 0, 5, 6, 0, 0, 0, 0} +#define OMAP5_IVA_DPLL_PARAM_38M4_LOW { 91, 2, 0, 0, 10, 12, 0, 0, 0, 0} + +/* DPLL_CORE Preferred Settings m n m2 m3 h11 h12 h13 h14 h22 h23 */ +/* SYS_CLK = 12.0MHz */ +#define OMAP5_CORE_DPLL_PARAM_12M0_NOM { 266, 2, 2, 5, 8, 4, 62, 4, 5, 7} +#define OMAP5_CORE_DPLL_PARAM_12M0_LOW { 266, 2, 4, 8, 8, 8, 62, 10, 10, 14} +/* SYS_CLK = 16.8MHz */ +#define OMAP5_CORE_DPLL_PARAM_16M8_NOM { 443, 6, 2, 5, 8, 4, 62, 4, 5, 7} +#define OMAP5_CORE_DPLL_PARAM_16M8_LOW { 443, 6, 4, 8, 8, 8, 62, 10, 10, 14} +/* SYS_CLK = 19.2MHz */ +#define OMAP5_CORE_DPLL_PARAM_19M2_NOM { 277, 4, 2, 5, 8, 4, 62, 4, 5, 7} +#define OMAP5_CORE_DPLL_PARAM_19M2_LOW { 277, 4, 4, 8, 8, 8, 62, 10, 10, 14} +/* SYS_CLK = 26.0MHz */ +#define OMAP5_CORE_DPLL_PARAM_26M0_NOM { 368, 8, 2, 5, 8, 4, 62, 4, 5, 7} +#define OMAP5_CORE_DPLL_PARAM_26M0_LOW { 368, 8, 4, 8, 8, 8, 62, 10, 10, 14} +/* SYS_CLK = 38.4MHz */ +#define OMAP5_CORE_DPLL_PARAM_38M4_NOM { 277, 9, 2, 5, 8, 4, 62, 4, 5, 7} +#define OMAP5_CORE_DPLL_PARAM_38M4_LOW { 277, 9, 4, 8, 8, 8, 62, 10, 10, 14} + +/* DPLL_PER Preferred Settings m n m2 m3 h11 h12 h13 h14 h22 h23 */ +/* SYS_CLK = 12.0MHz */ +#define OMAP5_PER_DPLL_PARAM_12M0_NOM { 32, 0, 4, 3, 6, 4, 0, 2, 0, 0} +#define OMAP5_PER_DPLL_PARAM_12M0_LOW { 32, 0, 4, 4, 6, 4, 0, 4, 0, 0} +/* SYS_CLK = 16.8MHz */ +#define OMAP5_PER_DPLL_PARAM_16M8_NOM { 160, 6, 4, 3, 6, 4, 0, 2, 0, 0} +#define OMAP5_PER_DPLL_PARAM_16M8_LOW { 160, 6, 4, 4, 6, 4, 0, 4, 0, 0} +/* SYS_CLK = 19.2MHz */ +#define OMAP5_PER_DPLL_PARAM_19M2_NOM { 20, 0, 4, 3, 6, 4, 0, 2, 0, 0} +#define OMAP5_PER_DPLL_PARAM_19M2_LOW { 20, 0, 4, 4, 6, 4, 0, 4, 0, 0} +/* SYS_CLK = 26.0MHz */ +#define OMAP5_PER_DPLL_PARAM_26M0_NOM { 192, 12, 4, 3, 6, 4, 0, 2, 0, 0} +#define OMAP5_PER_DPLL_PARAM_26M0_LOW { 192, 12, 4, 4, 6, 4, 0, 4, 0, 0} +/* SYS_CLK = 38.4MHz */ +#define OMAP5_PER_DPLL_PARAM_38M4_NOM { 10, 0, 4, 3, 6, 4, 0, 2, 0, 0} +#define OMAP5_PER_DPLL_PARAM_38M4_LOW { 10, 0, 4, 4, 6, 4, 0, 4, 0, 0} + +/* DPLL_ABE Preferred Settings m n m2 m3 h11 h12 h13 h14 h22 h23 */ +#define OMAP5_ABE_DPLL_PARAM { 750, 0, 1, 1, 0, 0, 0, 0, 0, 0} + +/* DPLL_USB Preferred Settings m n m2 m3 h11 h12 h13 h14 h22 h23 */ +/* SYS_CLK = 12.0MHz */ +#define OMAP5_USB_DPLL_PARAM_12M0 { 400, 4, 2, 0, 0, 0, 0, 0, 0, 0} +/* SYS_CLK = 16.8MHz */ +#define OMAP5_USB_DPLL_PARAM_16M8 { 400, 6, 2, 0, 0, 0, 0, 0, 0, 0} +/* SYS_CLK = 19.2MHz */ +#define OMAP5_USB_DPLL_PARAM_19M2 { 400, 6, 2, 0, 0, 0, 0, 0, 0, 0} +/* SYS_CLK = 26.0MHz */ +#define OMAP5_USB_DPLL_PARAM_26M0 { 480, 12, 2, 0, 0, 0, 0, 0, 0, 0} +/* SYS_CLK = 38.4MHz */ +#define OMAP5_USB_DPLL_PARAM_38M4 { 480, 15, 2, 0, 0, 0, 0, 0, 0, 0} + +/* DPLL_UNIPRO1/UNIPRO2 Preferred Settings m n m2 m3 h11 h12 h13 h14 h22 h23 */ +/* Different for DCO clock 1500MHz and 1250MHz */ +/* SYS_CLK = 12.0MHz */ +#define OMAP5_UNIPRO_DPLL_PARAM_12M0_DCO1M50 { 520, 4, 4, 0, 0, 0, 0, 0, 0, 0} +#define OMAP5_UNIPRO_DPLL_PARAM_12M0_DCO1M25 {1822, 14, 4, 0, 0, 0, 0, 0, 0, 0} +/* SYS_CLK = 16.8MHz */ +#define OMAP5_UNIPRO_DPLL_PARAM_16M8_DCO1M50 { 520, 6, 4, 0, 0, 0, 0, 0, 0, 0} +#define OMAP5_UNIPRO_DPLL_PARAM_16M8_DCO1M25 {1822, 20, 4, 0, 0, 0, 0, 0, 0, 0} +/* SYS_CLK = 19.2MHz */ +#define OMAP5_UNIPRO_DPLL_PARAM_19M2_DCO1M50 { 520, 7, 4, 0, 0, 0, 0, 0, 0, 0} +#define OMAP5_UNIPRO_DPLL_PARAM_19M2_DCO1M25 { 911, 11, 4, 0, 0, 0, 0, 0, 0, 0} +/* SYS_CLK = 26.0MHz */ +#define OMAP5_UNIPRO_DPLL_PARAM_26M0_DCO1M50 { 528, 10, 4, 0, 0, 0, 0, 0, 0, 0} +#define OMAP5_UNIPRO_DPLL_PARAM_26M0_DCO1M25 (1850, 32, 4, 0, 0, 0, 0, 0, 0, 0} +/* SYS_CLK = 38.4MHz */ +#define OMAP5_UNIPRO_DPLL_PARAM_38M4_DCO1M50 { 520, 15, 4, 0, 0, 0, 0, 0, 0, 0} +#define OMAP5_UNIPRO_DPLL_PARAM_38M4_DCO1M25 { 911, 23, 4, 0, 0, 0, 0, 0, 0, 0} + +void omap5_configure_mpu_dpll(const struct dpll_param *dpll_param); +void omap5_configure_iva_dpll(const struct dpll_param *dpll_param); +void omap5_configure_core_dpll_no_lock(const struct dpll_param *param); +void omap5_configure_per_dpll(const struct dpll_param *dpll_param); +void omap5_configure_abe_dpll(const struct dpll_param *dpll_param); +void omap5_configure_usb_dpll(const struct dpll_param *dpll_param); +void omap5_lock_core_dpll(void); +void omap5_lock_core_dpll_shadow(const struct dpll_param *param); +void omap5_enable_all_clocks(void); + diff --git a/arch/arm/mach-omap/include/mach/omap5-mux.h b/arch/arm/mach-omap/include/mach/omap5-mux.h new file mode 100644 index 0000000..808d045 --- /dev/null +++ b/arch/arm/mach-omap/include/mach/omap5-mux.h @@ -0,0 +1,321 @@ +/* + * (C) Copyright 2013 + * Sam Solutions, + * + * Authors: + * Uladzimir Bely + * Dmitry Lavnikevich + * + * Derived from OMAP5 work in U-Boot project by + * Richard Woodruff + * Aneesh V + * Balaji Krishnamoorthy + * (Copyright 2004-2009, Texas Instruments Incorporated) + */ + +#ifndef _MUX_OMAP5_H_ +#define _MUX_OMAP5_H_ + +#include + +struct pad_conf_entry { + u16 offset; + u16 val; +}; + +#define OFF_PD (0 << 12) +#define OFF_PU (0 << 12) +#define OFF_OUT_PTD (0 << 10) +#define OFF_OUT_PTU (0 << 10) +#define OFF_IN (0 << 10) +#define OFF_OUT (0 << 10) +#define OFF_EN (0 << 9) + +#define IEN (1 << 8) +#define IDIS (0 << 8) +#define PTU (3 << 3) +#define PTD (1 << 3) +#define EN (1 << 3) +#define DIS (0 << 3) + +#define M0 0 +#define M1 1 +#define M2 2 +#define M3 3 +#define M4 4 +#define M5 5 +#define M6 6 +#define M7 7 + +#define SAFE_MODE M7 + +#define OFF_IN_PD 0 +#define OFF_IN_PU 0 +#define OFF_OUT_PD 0 +#define OFF_OUT_PU 0 + +/* CTRL_MODULE_CORE_PAT Registers */ +/* Base address is 0x4a002800 */ +#define CORE_REVISION 0x0000 +#define CORE_HWINFO 0x0004 +#define CORE_SYSCONFIG 0x0010 +#define EMMC_CLK 0x0040 +#define EMMC_CMD 0x0042 +#define EMMC_DATA0 0x0044 +#define EMMC_DATA1 0x0046 +#define EMMC_DATA2 0x0048 +#define EMMC_DATA3 0x004a +#define EMMC_DATA4 0x004c +#define EMMC_DATA5 0x004e +#define EMMC_DATA6 0x0050 +#define EMMC_DATA7 0x0052 +#define C2C_CLKOUT0 0x0054 +#define C2C_CLKOUT1 0x0056 +#define C2C_CLKIN0 0x0058 +#define C2C_CLKIN1 0x005a +#define C2C_DATAIN0 0x005c +#define C2C_DATAIN1 0x005e +#define C2C_DATAIN2 0x0060 +#define C2C_DATAIN3 0x0062 +#define C2C_DATAIN4 0x0064 +#define C2C_DATAIN5 0x0066 +#define C2C_DATAIN6 0x0068 +#define C2C_DATAIN7 0x006a +#define C2C_DATAOUT0 0x006c +#define C2C_DATAOUT1 0x006e +#define C2C_DATAOUT2 0x0070 +#define C2C_DATAOUT3 0x0072 +#define C2C_DATAOUT4 0x0074 +#define C2C_DATAOUT5 0x0076 +#define C2C_DATAOUT6 0x0078 +#define C2C_DATAOUT7 0x007a +#define C2C_DATA8 0x007c +#define C2C_DATA9 0x007e +#define C2C_DATA10 0x0080 +#define C2C_DATA11 0x0082 +#define C2C_DATA12 0x0084 +#define C2C_DATA13 0x0086 +#define C2C_DATA14 0x0088 +#define C2C_DATA15 0x008a +#define LLIA_WAKEREQOUT 0x008c +#define LLIB_WAKEREQOUT 0x008e +#define HSI1_ACREADY 0x0090 +#define HSI1_CAREADY 0x0092 +#define HSI1_ACWAKE 0x0094 +#define HSI1_CAWAKE 0x0096 +#define HSI1_ACFLAG 0x0098 +#define HSI1_ACDATA 0x009a +#define HSI1_CAFLAG 0x009c +#define HSI1_CADATA 0x009e +#define UART1_TX 0x00a0 +#define UART1_CTS 0x00a2 +#define UART1_RX 0x00a4 +#define UART1_RTS 0x00a6 +#define HSI2_CAREADY 0x00a8 +#define HSI2_ACREADY 0x00aa +#define HSI2_CAWAKE 0x00ac +#define HSI2_ACWAKE 0x00ae +#define HSI2_CAFLAG 0x00b0 +#define HSI2_CADATA 0x00b2 +#define HSI2_ACFLAG 0x00b4 +#define HSI2_ACDATA 0x00b6 +#define UART2_RTS 0x00b8 +#define UART2_CTS 0x00ba +#define UART2_RX 0x00bc +#define UART2_TX 0x00be +#define USBB1_HSIC_STROBE 0x00c0 +#define USBB1_HSIC_DATA 0x00c2 +#define USBB2_HSIC_STROBE 0x00c4 +#define USBB2_HSIC_DATA 0x00c6 +#define TIMER10_PWM_EVT 0x00c8 +#define DSIPORTA_TE0 0x00ca +#define DSIPORTA_LANE0X 0x00cc +#define DSIPORTA_LANE0Y 0x00ce +#define DSIPORTA_LANE1X 0x00d0 +#define DSIPORTA_LANE1Y 0x00d2 +#define DSIPORTA_LANE2X 0x00d4 +#define DSIPORTA_LANE2Y 0x00d6 +#define DSIPORTA_LANE3X 0x00d8 +#define DSIPORTA_LANE3Y 0x00da +#define DSIPORTA_LANE4X 0x00dc +#define DSIPORTA_LANE4Y 0x00de +#define DSIPORTC_LANE0X 0x00e0 +#define DSIPORTC_LANE0Y 0x00e2 +#define DSIPORTC_LANE1X 0x00e4 +#define DSIPORTC_LANE1Y 0x00e6 +#define DSIPORTC_LANE2X 0x00e8 +#define DSIPORTC_LANE2Y 0x00ea +#define DSIPORTC_LANE3X 0x00ec +#define DSIPORTC_LANE3Y 0x00ee +#define DSIPORTC_LANE4X 0x00f0 +#define DSIPORTC_LANE4Y 0x00f2 +#define DSIPORTC_TE0 0x00f4 +#define TIMER9_PWM_EVT 0x00f6 +#define I2C4_SCL 0x00f8 +#define I2C4_SDA 0x00fa +#define MCSPI2_CLK 0x00fc +#define MCSPI2_SIMO 0x00fe +#define MCSPI2_SOMI 0x0100 +#define MCSPI2_CS0 0x0102 +#define RFBI_DATA15 0x0104 +#define RFBI_DATA14 0x0106 +#define RFBI_DATA13 0x0108 +#define RFBI_DATA12 0x010a +#define RFBI_DATA11 0x010c +#define RFBI_DATA10 0x010e +#define RFBI_DATA9 0x0110 +#define RFBI_DATA8 0x0112 +#define RFBI_DATA7 0x0114 +#define RFBI_DATA6 0x0116 +#define RFBI_DATA5 0x0118 +#define RFBI_DATA4 0x011a +#define RFBI_DATA3 0x011c +#define RFBI_DATA2 0x011e +#define RFBI_DATA1 0x0120 +#define RFBI_DATA0 0x0122 +#define RFBI_WE 0x0124 +#define RFBI_CS0 0x0126 +#define RFBI_A0 0x0128 +#define RFBI_RE 0x012a +#define RFBI_HSYNC0 0x012c +#define RFBI_TE_VSYNC0 0x012e +#define GPIO6_182 0x0130 +#define GPIO6_183 0x0132 +#define GPIO6_184 0x0134 +#define GPIO6_185 0x0136 +#define GPIO6_186 0x0138 +#define GPIO6_187 0x013a +#define HDMI_CEC 0x013c +#define HDMI_HPD 0x013e +#define HDMI_DDC_SCL 0x0140 +#define HDMI_DDC_SDA 0x0142 +#define CSIPORTC_LANE0X 0x0144 +#define CSIPORTC_LANE0Y 0x0146 +#define CSIPORTC_LANE1X 0x0148 +#define CSIPORTC_LANE1Y 0x014a +#define CSIPORTB_LANE0X 0x014c +#define CSIPORTB_LANE0Y 0x014e +#define CSIPORTB_LANE1X 0x0150 +#define CSIPORTB_LANE1Y 0x0152 +#define CSIPORTB_LANE2X 0x0154 +#define CSIPORTB_LANE2Y 0x0156 +#define CSIPORTA_LANE0X 0x0158 +#define CSIPORTA_LANE0Y 0x015a +#define CSIPORTA_LANE1X 0x015c +#define CSIPORTA_LANE1Y 0x015e +#define CSIPORTA_LANE2X 0x0160 +#define CSIPORTA_LANE2Y 0x0162 +#define CSIPORTA_LANE3X 0x0164 +#define CSIPORTA_LANE3Y 0x0166 +#define CSIPORTA_LANE4X 0x0168 +#define CSIPORTA_LANE4Y 0x016a +#define CAM_SHUTTER 0x016c +#define CAM_STROBE 0x016e +#define CAM_GLOBALRESET 0x0170 +#define TIMER11_PWM_EVT 0x0172 +#define TIMER5_PWM_EVT 0x0174 +#define TIMER6_PWM_EVT 0x0176 +#define TIMER8_PWM_EVT 0x0178 +#define I2C3_SCL 0x017a +#define I2C3_SDA 0x017c +#define GPIO8_233 0x017e +#define GPIO8_234 0x0180 +#define ABE_CLKS 0x0182 +#define ABEDMIC_DIN1 0x0184 +#define ABEDMIC_DIN2 0x0186 +#define ABEDMIC_DIN3 0x0188 +#define ABEDMIC_CLK1 0x018a +#define ABEDMIC_CLK2 0x018c +#define ABEDMIC_CLK3 0x018e +#define ABESLIMBUS1_CLOCK 0x0190 +#define ABESLIMBUS1_DATA 0x0192 +#define ABEMCBSP2_DR 0x0194 +#define ABEMCBSP2_DX 0x0196 +#define ABEMCBSP2_FSX 0x0198 +#define ABEMCBSP2_CLKX 0x019a +#define ABEMCPDM_UL_DATA 0x019c +#define ABEMCPDM_DL_DATA 0x019e +#define ABEMCPDM_FRAME 0x01a0 +#define ABEMCPDM_LB_CLK 0x01a2 +#define WLSDIO_CLK 0x01a4 +#define WLSDIO_CMD 0x01a6 +#define WLSDIO_DATA0 0x01a8 +#define WLSDIO_DATA1 0x01aa +#define WLSDIO_DATA2 0x01ac +#define WLSDIO_DATA3 0x01ae +#define UART5_RX 0x01b0 +#define UART5_TX 0x01b2 +#define UART5_CTS 0x01b4 +#define UART5_RTS 0x01b6 +#define I2C2_SCL 0x01b8 +#define I2C2_SDA 0x01ba +#define MCSPI1_CLK 0x01bc +#define MCSPI1_SOMI 0x01be +#define MCSPI1_SIMO 0x01c0 +#define MCSPI1_CS0 0x01c2 +#define MCSPI1_CS1 0x01c4 +#define I2C5_SCL 0x01c6 +#define I2C5_SDA 0x01c8 +#define PERSLIMBUS2_CLOCK 0x01ca /* GPIO5_145 in rev. 2 */ +#define PERSLIMBUS2_DATA 0x01cc /* GPIO5_146 in rev. 2 */ +#define UART6_TX 0x01ce +#define UART6_RX 0x01d0 +#define UART6_CTS 0x01d2 +#define UART6_RTS 0x01d4 +#define UART3_CTS_RCTX 0x01d6 +#define UART3_RTS_IRSD 0x01d8 +#define UART3_TX_IRTX 0x01da +#define UART3_RX_IRRX 0x01dc +#define USBB3_HSIC_STROBE 0x01de +#define USBB3_HSIC_DATA 0x01e0 +#define SDCARD_CLK 0x01e2 +#define SDCARD_CMD 0x01e4 +#define SDCARD_DATA2 0x01e6 +#define SDCARD_DATA3 0x01e8 +#define SDCARD_DATA0 0x01ea +#define SDCARD_DATA1 0x01ec +#define USBD0_HS_DP 0x01ee +#define USBD0_HS_DM 0x01f0 +#define I2C1_PMIC_SCL 0x01f2 +#define I2C1_PMIC_SDA 0x01f4 +#define USBD0_SS_RX 0x01f6 + +/* CTRL_MODULE_WKUP_PAD Registers */ +/* Base address is 0x4ae0c800 */ +#define WKUP_REVISION 0x0000 +#define WKUP_HWINFO 0x0004 +#define WKUP_SYSCONFIG 0x0010 +#define LLIA_WAKEREQIN 0x0040 +#define LLIB_WAKEREQIN 0x0042 +#define DRM_EMU0 0x0044 +#define DRM_EMU1 0x0046 +#define JTAG_NTRST 0x0048 +#define JTAG_TCK 0x004a +#define JTAG_RTCK 0x004c +#define JTAG_TMSC 0x004e +#define JTAG_TDI 0x0050 +#define JTAG_TDO 0x0052 +#define SYS_32K 0x0054 +#define FREF_CLK_IOREQ 0x0056 +#define FREF_CLK0_OUT 0x0058 +#define FREF_CLK1_OUT 0x005a +#define FREF_CLK2_OUT 0x005c +#define FREF_CLK2_REQ 0x005e +#define FREF_CLK1_REQ 0x0060 +#define SYS_NRESPWRON 0x0062 +#define SYS_NRESWARM 0x0064 +#define SYS_PWR_REQ 0x0066 +#define SYS_NIRQ1 0x0068 +#define SYS_NIRQ2 0x006a +#define SR_PMIC_SCL 0x006c +#define SR_PMIC_SDA 0x006e +#define SYS_BOOT0 0x0070 +#define SYS_BOOT1 0x0072 +#define SYS_BOOT2 0x0074 +#define SYS_BOOT3 0x0076 +#define SYS_BOOT4 0x0078 +#define SYS_BOOT5 0x007a + +void omap5_do_set_mux(u32 base, struct pad_conf_entry const *array, int size); + +#endif /* _MUX_OMAP5_H_ */ diff --git a/arch/arm/mach-omap/include/mach/omap5-silicon.h b/arch/arm/mach-omap/include/mach/omap5-silicon.h new file mode 100644 index 0000000..a0c7039 --- /dev/null +++ b/arch/arm/mach-omap/include/mach/omap5-silicon.h @@ -0,0 +1,244 @@ +/* + * (C) Copyright 2013 + * Sam Solutions, + * + * Authors: + * Uladzimir Bely + * Dmitry Lavnikevich + * + * Derived from OMAP4 work by + * Aneesh V + */ + +#ifndef _OMAP5_H_ +#define _OMAP5_H_ + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +#include +#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ + +/* L4 Peripherals - L4 Wakeup and L4 Core now */ +#define OMAP54XX_L4_CFG_BASE 0x4A000000 +#define OMAP54XX_L4_WKUP_BASE 0x4Ae00000 +#define OMAP54XX_L4_PER_BASE 0x48000000 + +/* EMIF and DMM registers */ +#define OMAP54XX_EMIF1_BASE 0x4c000000 +#define OMAP54XX_EMIF2_BASE 0x4d000000 + +#define OMAP54XX_DRAM_ADDR_SPACE_START 0x80000000 +#define OMAP54XX_DRAM_ADDR_SPACE_END 0xff000000 + +/* CONTROL */ +#define OMAP54XX_CTRL_BASE (OMAP54XX_L4_CFG_BASE + 0x2000) +#define OMAP54XX_CONTROL_PADCONF_CORE (OMAP54XX_CTRL_BASE + 0x0800) +#define OMAP54XX_CONTROL_PADCONF_WKUP (OMAP54XX_L4_WKUP_BASE + 0xc800) + +/* PRM */ +#define OMAP54XX_PRM_VC_VAL_BYPASS (OMAP54XX_L4_WKUP_BASE + 0x7ba0) +#define OMAP54XX_PRM_VC_CFG_I2C_MODE (OMAP54XX_L4_WKUP_BASE + 0x7bb4) +#define OMAP54XX_PRM_VC_CFG_I2C_CLK (OMAP54XX_L4_WKUP_BASE + 0x7bb8) +#define OMAP54XX_PRM_VC_VAL_BYPASS_VALID_BIT 0x1000000 +#define OMAP54XX_PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT 0 +#define OMAP54XX_PRM_VC_VAL_BYPASS_SLAVEADDR_MASK 0x7F +#define OMAP54XX_PRM_VC_VAL_BYPASS_REGADDR_SHIFT 8 +#define OMAP54XX_PRM_VC_VAL_BYPASS_REGADDR_MASK 0xFF +#define OMAP54XX_PRM_VC_VAL_BYPASS_DATA_SHIFT 16 +#define OMAP54XX_PRM_VC_VAL_BYPASS_DATA_MASK 0xFF + +#define VDD_MPU 1150 +#define VDD_MM 1150 +#define VDD_CORE 1150 + +#define SMPS_BASE_VOLT_UV 500000 +#define SMPS_I2C_SLAVE_ADDR 0x12 +#define SMPS_REG_ADDR_12_MPU 0x23 +#define SMPS_REG_ADDR_45_IVA 0x2B +#define SMPS_REG_ADDR_8_CORE 0x37 + +/* IRQ */ +#define OMAP54XX_PRM_IRQSTATUS_MPU (OMAP54XX_L4_WKUP_BASE + 0x6010) + +/* UART */ +#define OMAP54XX_UART1_BASE (OMAP54XX_L4_PER_BASE + 0x6a000) +#define OMAP54XX_UART2_BASE (OMAP54XX_L4_PER_BASE + 0x6c000) +#define OMAP54XX_UART3_BASE (OMAP54XX_L4_PER_BASE + 0x20000) + +/* I2C */ +#define OMAP54XX_I2C1_BASE (OMAP54XX_L4_PER_BASE + 0x070000) +#define OMAP54XX_I2C2_BASE (OMAP54XX_L4_PER_BASE + 0x072000) +#define OMAP54XX_I2C3_BASE (OMAP54XX_L4_PER_BASE + 0x060000) + +/* General Purpose Timers */ +#define OMAP54XX_GPT1_BASE (OMAP54XX_L4_WKUP_BASE + 0x18000) +#define OMAP54XX_GPT2_BASE (OMAP54XX_L4_PER_BASE + 0x32000) +#define OMAP54XX_GPT3_BASE (OMAP54XX_L4_PER_BASE + 0x34000) + +/* Watchdog Timer2 - MPU watchdog */ +#define OMAP54XX_WDT2_BASE (OMAP54XX_L4_WKUP_BASE + 0x14000) + +#define OMAP54XX_SCRM_BASE (OMAP54XX_L4_WKUP_BASE + 0xa000) +#define OMAP54XX_SCRM_AUXCLK1 (OMAP54XX_SCRM_BASE + 0x314) +#define OMAP54XX_SCRM_AUXCLK3 (OMAP54XX_SCRM_BASE + 0x31c) + +/* 32KTIMER */ +#define OMAP54XX_32KTIMER_BASE (OMAP54XX_L4_WKUP_BASE + 0x4000) + +/* MMC */ +#define OMAP54XX_MMC1_BASE (OMAP54XX_L4_PER_BASE + 0x09C000) +#define OMAP54XX_MMC2_BASE (OMAP54XX_L4_PER_BASE + 0x0B4000) +#define OMAP54XX_MMC3_BASE (OMAP54XX_L4_PER_BASE + 0x0ad000) +#define OMAP54XX_MMC4_BASE (OMAP54XX_L4_PER_BASE + 0x0d1000) +#define OMAP54XX_MMC5_BASE (OMAP54XX_L4_PER_BASE + 0x0d5000) + +/* GPIO */ +#define OMAP54XX_GPIO1_BASE (OMAP54XX_L4_WKUP_BASE + 0x10000) +#define OMAP54XX_GPIO2_BASE (OMAP54XX_L4_PER_BASE + 0x55000) +#define OMAP54XX_GPIO3_BASE (OMAP54XX_L4_PER_BASE + 0x57000) +#define OMAP54XX_GPIO4_BASE (OMAP54XX_L4_PER_BASE + 0x59000) +#define OMAP54XX_GPIO5_BASE (OMAP54XX_L4_PER_BASE + 0x5b000) +#define OMAP54XX_GPIO6_BASE (OMAP54XX_L4_PER_BASE + 0x5d000) + +/* GPMC */ +#define OMAP54XX_GPMC_BASE 0x50000000 + +/* DMM */ +#define OMAP54XX_DMM_BASE 0x4e000000 + +/* Memory Adapter */ +#define OMAP54XX_MA_BASE 0x482AF000 + +/* + * Hardware Register Details + */ + +/* Watchdog Timer */ +#define WD_UNLOCK1 0xAAAA +#define WD_UNLOCK2 0x5555 + +/* GP Timer */ +#define TCLR_ST (0x1 << 0) +#define TCLR_AR (0x1 << 1) +#define TCLR_PRE (0x1 << 5) + +/* PRM */ +#define PRM_BASE 0x4AE06000 +#define PRM_DEVICE_BASE (PRM_BASE + 0x1B00) + +#define PRM_RSTCTRL PRM_DEVICE_BASE +#define PRM_RSTCTRL_RESET 0x01 + +#ifndef __ASSEMBLY__ + +struct s32ktimer { + unsigned char res[0x10]; + unsigned int s32k_cr; +}; + +#endif /* __ASSEMBLY__ */ + +/* + * Non-secure SRAM Addresses + * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE + * at 0x40304000(EMU base) so that our code works for both EMU and GP + */ +#define NON_SECURE_SRAM_START 0x40304000 +#define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */ +/* base address for indirect vectors (internal boot mode) */ +#define SRAM_ROM_VECT_BASE 0x4030D000 + +/* OMAP5 silicon revisions */ +#define OMAP543X_SILICON_ID_INVALID 0 +#define OMAP5430_ES1_0 0x54300100 +#define OMAP5430_ES2_0 0x54300200 +#define OMAP5432_ES1_0 0x54320100 +#define OMAP5432_ES2_0 0x54320200 + +struct omap5_ddr_regs { + u32 freq; + u32 sdram_config_init; + u32 sdram_config; + u32 ref_ctrl; + u32 sdram_tim1; + u32 sdram_tim2; + u32 sdram_tim3; + u32 read_idle_ctrl; + u32 zq_config; + u32 temp_alert_config; + u32 emif_ddr_phy_ctlr_1_init; + u32 emif_ddr_phy_ctlr_1; + u32 emif_ddr_phy_ctlr_2; + u32 emif_ddr_ext_phy_ctrl_1_init; + u32 emif_ddr_ext_phy_ctrl_1; + u32 emif_ddr_ext_phy_ctrl_2_init; + u32 emif_ddr_ext_phy_ctrl_2; + u32 emif_ddr_ext_phy_ctrl_3_init; + u32 emif_ddr_ext_phy_ctrl_3; + u32 emif_ddr_ext_phy_ctrl_4_init; + u32 emif_ddr_ext_phy_ctrl_4; + u32 emif_ddr_ext_phy_ctrl_5_init; + u32 emif_ddr_ext_phy_ctrl_5; + u32 emif_ddr_ext_phy_ctrl_6_init; + u32 emif_ddr_ext_phy_ctrl_6; + u32 emif_ddr_ext_phy_ctrl_7_init; + u32 emif_ddr_ext_phy_ctrl_7; + u32 emif_ddr_ext_phy_ctrl_8_init; + u32 emif_ddr_ext_phy_ctrl_8; + u32 emif_ddr_ext_phy_ctrl_9_init; + u32 emif_ddr_ext_phy_ctrl_9; + u32 emif_ddr_ext_phy_ctrl_10_init; + u32 emif_ddr_ext_phy_ctrl_10; + u32 emif_ddr_ext_phy_ctrl_11_init; + u32 emif_ddr_ext_phy_ctrl_11; + u32 emif_ddr_ext_phy_ctrl_12_init; + u32 emif_ddr_ext_phy_ctrl_12; + u32 emif_ddr_ext_phy_ctrl_13_init; + u32 emif_ddr_ext_phy_ctrl_13; + u32 emif_ddr_ext_phy_ctrl_14_init; + u32 emif_ddr_ext_phy_ctrl_14; + u32 emif_ddr_ext_phy_ctrl_15_init; + u32 emif_ddr_ext_phy_ctrl_15; + u32 emif_ddr_ext_phy_ctrl_16_init; + u32 emif_ddr_ext_phy_ctrl_16; + u32 emif_ddr_ext_phy_ctrl_17_init; + u32 emif_ddr_ext_phy_ctrl_17; + u32 emif_ddr_ext_phy_ctrl_18_init; + u32 emif_ddr_ext_phy_ctrl_18; + u32 emif_ddr_ext_phy_ctrl_19_init; + u32 emif_ddr_ext_phy_ctrl_19; + u32 emif_ddr_ext_phy_ctrl_20_init; + u32 emif_ddr_ext_phy_ctrl_20; + u32 emif_ddr_ext_phy_ctrl_21_init; + u32 emif_ddr_ext_phy_ctrl_21; + u32 emif_ddr_ext_phy_ctrl_22_init; + u32 emif_ddr_ext_phy_ctrl_22; + u32 emif_ddr_ext_phy_ctrl_23_init; + u32 emif_ddr_ext_phy_ctrl_23; + u32 emif_ddr_ext_phy_ctrl_24_init; + u32 emif_ddr_ext_phy_ctrl_24; + u32 emif_ddr_ext_phy_ctrl_25_init; + u32 emif_ddr_ext_phy_ctrl_25; + u32 emif_ddr_ext_phy_ctrl_26_init; + u32 emif_ddr_ext_phy_ctrl_26; + u32 emif_ddr_ext_phy_ctrl_27_init; + u32 emif_ddr_ext_phy_ctrl_27; + u32 emif_ddr_ext_phy_ctrl_28_init; + u32 emif_ddr_ext_phy_ctrl_28; + u32 emif_ddr_ext_phy_ctrl_29_init; + u32 emif_ddr_ext_phy_ctrl_29; + u32 emif_ddr_ext_phy_ctrl_30_init; + u32 emif_ddr_ext_phy_ctrl_30; + u32 emif_rd_wr_lvl_rmp_win; + u32 emif_rd_wr_lvl_rmp_ctl; + u32 emif_rd_wr_lvl_ctl; + u32 emif_rd_wr_exec_thresh; +}; + +struct dpll_param; + +void omap5_ddr_init(const struct omap5_ddr_regs *ddr_regs, const struct dpll_param *); +void omap5_power_i2c_send(u32); +unsigned int omap5_revision(void); +void omap5_scale_vcores(void); + +#endif /* _OMAP5_H_ */ diff --git a/arch/arm/mach-omap/omap5_clock.c b/arch/arm/mach-omap/omap5_clock.c new file mode 100644 index 0000000..9399e12 --- /dev/null +++ b/arch/arm/mach-omap/omap5_clock.c @@ -0,0 +1,385 @@ +/* + * (C) Copyright 2013 + * Sam Solutions, + * + * Authors: + * Uladzimir Bely + * Dmitry Lavnikevich + * + * Derived from OMAP4 work + */ + +#include +#include +#include +#include +#include +#include + +#define LDELAY 12000000 + +#define PM_DSS_PWRSTCTRL 0x4AE07400 + +void omap5_configure_mpu_dpll(const struct dpll_param *dpll_param) +{ + /* Unlock the MPU dpll */ + sr32(CM_CLKMODE_DPLL_MPU, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value((1 << 0), 0, CM_IDLEST_DPLL_MPU, LDELAY); + + /* Disable DPLL auto control */ + sr32(CM_AUTOIDLE_DPLL_MPU, 0, 3, 0x0); + + /* Set M,N,M2 values */ + sr32(CM_CLKSEL_DPLL_MPU, 8, 11, dpll_param->m); + sr32(CM_CLKSEL_DPLL_MPU, 0, 7, dpll_param->n); + sr32(CM_DIV_M2_DPLL_MPU, 0, 5, dpll_param->m2); + + /* Lock the MPU dpll */ + sr32(CM_CLKMODE_DPLL_MPU, 0, 3, PLL_LOCK); + wait_on_value((1 << 0), 1, CM_IDLEST_DPLL_MPU, LDELAY); + + return; +} + +void omap5_configure_iva_dpll(const struct dpll_param *dpll_param) +{ + /* Unlock the IVA dpll */ + sr32(CM_CLKMODE_DPLL_IVA, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value((1 << 0), 0, CM_IDLEST_DPLL_IVA, LDELAY); + + /* CM_BYPCLK_DPLL_IVA = CORE_X2_CLK/2 */ + sr32(CM_BYPCLK_DPLL_IVA, 0, 2, 0x1); + + /* Disable DPLL auto control */ + sr32(CM_AUTOIDLE_DPLL_IVA, 0, 3, 0x0); + + /* Set M,N,H11,H12 */ + sr32(CM_CLKSEL_DPLL_IVA, 8, 11, dpll_param->m); + sr32(CM_CLKSEL_DPLL_IVA, 0, 7, dpll_param->n); + sr32(CM_DIV_H11_DPLL_IVA, 0, 5, dpll_param->h11); + sr32(CM_DIV_H12_DPLL_IVA, 0, 5, dpll_param->h12); + + /* Lock the IVA dpll */ + sr32(CM_CLKMODE_DPLL_IVA, 0, 3, PLL_LOCK); + wait_on_value((1 << 0), 1, CM_IDLEST_DPLL_IVA, LDELAY); + + return; +} + +void omap5_configure_core_dpll_no_lock(const struct dpll_param *dpll_param) +{ + /* CORE_CLK=CORE_X2_CLK/2, L3_CLK=CORE_CLK/2, L4_CLK=L3_CLK/2 */ + sr32(CM_CLKSEL_CORE, 0, 32, 0x110); + + /* Unlock the CORE dpll */ + sr32(CM_CLKMODE_DPLL_CORE, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value((1 << 0), 0, CM_IDLEST_DPLL_CORE, LDELAY); + + /* Disable DPLL auto control */ + sr32(CM_AUTOIDLE_DPLL_CORE, 0, 3, 0x0); + + /* Set M,N,M2, M3, H11, H12, H13, H14, H22, H23 */ + sr32(CM_CLKSEL_DPLL_CORE, 8, 11, dpll_param->m); + sr32(CM_CLKSEL_DPLL_CORE, 0, 7, dpll_param->n); + sr32(CM_DIV_M2_DPLL_CORE, 0, 5, dpll_param->m2); + sr32(CM_DIV_M3_DPLL_CORE, 0, 5, dpll_param->m3); + sr32(CM_DIV_H11_DPLL_CORE, 0, 5, dpll_param->h11); + sr32(CM_DIV_H12_DPLL_CORE, 0, 5, dpll_param->h12); + sr32(CM_DIV_H13_DPLL_CORE, 0, 5, dpll_param->h13); + sr32(CM_DIV_H14_DPLL_CORE, 0, 5, dpll_param->h14); + sr32(CM_DIV_H22_DPLL_CORE, 0, 5, dpll_param->h22); + sr32(CM_DIV_H23_DPLL_CORE, 0, 5, dpll_param->h23); + + return; +} + +void omap5_configure_per_dpll(const struct dpll_param *dpll_param) +{ + /* Unlock the PER dpll */ + sr32(CM_CLKMODE_DPLL_PER, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value((1 << 0), 0, CM_IDLEST_DPLL_PER, LDELAY); + + /* Disable DPLL auto control */ + sr32(CM_AUTOIDLE_DPLL_PER, 0, 3, 0x0); + + /* Set M,N,M2, M3, H11, H12, H14 */ + sr32(CM_CLKSEL_DPLL_PER, 8, 11, dpll_param->m); + sr32(CM_CLKSEL_DPLL_PER, 0, 7, dpll_param->n); + sr32(CM_DIV_M2_DPLL_PER, 0, 5, dpll_param->m2); + sr32(CM_DIV_M3_DPLL_PER, 0, 5, dpll_param->m3); + sr32(CM_DIV_H11_DPLL_PER, 0, 5, dpll_param->h11); + sr32(CM_DIV_H12_DPLL_PER, 0, 5, dpll_param->h12); + sr32(CM_DIV_H14_DPLL_PER, 0, 5, dpll_param->h14); + + /* Lock the per dpll */ + sr32(CM_CLKMODE_DPLL_PER, 0, 3, PLL_LOCK); + wait_on_value((1 << 0), 1, CM_IDLEST_DPLL_PER, LDELAY); + + return; +} + +void omap5_configure_abe_dpll(const struct dpll_param *dpll_param) +{ + /* Some options to achieve 196.608MHz from 32768 Hz */ + sr32(CM_CLKMODE_DPLL_ABE, 8, 1, 1); /* DPLL_DRIFTGUARD_EN_MASK */ + sr32(CM_CLKMODE_DPLL_ABE, 9, 1, 1); /* DPLL_RELOCK_RAMP_EN_MASK */ + sr32(CM_CLKMODE_DPLL_ABE, 10, 1, 1); /* DPLL_LPMODE_EN_MASK */ + sr32(CM_CLKMODE_DPLL_ABE, 11, 1, 1); /* DPLL_REGM4XEN_MASK */ + + /* Spend 4 REFCLK cycles at each stage */ + sr32(CM_CLKMODE_DPLL_ABE, 5, 3, 7); + + /* Select SYS_32K as ref clk for ABE dpll */ + sr32(CM_CLKSEL_ABE_PLL_REF, 0, 1, 1); + + /* Unlock the ABE dpll */ + sr32(CM_CLKMODE_DPLL_ABE, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value((1 << 0), 0, CM_IDLEST_DPLL_ABE, LDELAY); + + /* Disable DPLL auto control */ + sr32(CM_AUTOIDLE_DPLL_ABE, 0, 3, 0x0); + + /* Set M,N,M2, M3 */ + sr32(CM_CLKSEL_DPLL_ABE, 8, 11, dpll_param->m); + sr32(CM_CLKSEL_DPLL_ABE, 0, 7, dpll_param->n); + sr32(CM_DIV_M2_DPLL_ABE, 0, 5, dpll_param->m2); + sr32(CM_DIV_M3_DPLL_ABE, 0, 5, dpll_param->m3); + + /* Lock the abe dpll */ + sr32(CM_CLKMODE_DPLL_ABE, 0, 3, PLL_LOCK); + wait_on_value((1 << 0), 1, CM_IDLEST_DPLL_ABE, LDELAY); + + return; +} + +void omap5_configure_usb_dpll(const struct dpll_param *dpll_param) +{ + /* Select the 60Mhz clock 480/8 = 60*/ + sr32(CM_CLKSEL_USB_60MHZ, 0, 32, 0x1); + + /* Unlock the USB dpll */ + sr32(CM_CLKMODE_DPLL_USB, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value((1 << 0), 0, CM_IDLEST_DPLL_USB, LDELAY); + + /* Disable auto control */ + sr32(CM_AUTOIDLE_DPLL_USB, 0, 3, 0x0); + + /* Set M,N,M2 */ + sr32(CM_CLKSEL_DPLL_USB, 8, 12, dpll_param->m); + sr32(CM_CLKSEL_DPLL_USB, 0, 8, dpll_param->n); + sr32(CM_DIV_M2_DPLL_USB, 0, 7, dpll_param->m2); + sr32(CM_DIV_M2_DPLL_USB, 9, 1, 0x1); + + /* Lock the usb dpll */ + sr32(CM_CLKMODE_DPLL_USB, 0, 3, PLL_LOCK); + wait_on_value((1 << 0), 1, CM_IDLEST_DPLL_USB, LDELAY); + + return; +} + +void omap5_lock_core_dpll(void) +{ + /* Lock the core dpll */ + sr32(CM_CLKMODE_DPLL_CORE, 0, 3, PLL_LOCK); + wait_on_value((1 << 0), 1, CM_IDLEST_DPLL_CORE, LDELAY); + + return; +} + +void omap5_lock_core_dpll_shadow(const struct dpll_param *param) +{ + /* Lock the core dpll using freq update method */ + *(volatile int*)CM_CLKMODE_DPLL_CORE = PLL_LOCK; + + /* CM_SHADOW_FREQ_CONFIG1: DLL_OVERRIDE = 1(hack), DLL_RESET = 1, + * DPLL_CORE_M2_DIV = 1, DPLL_CORE_DPLL_EN = 0x7, FREQ_UPDATE = 1 + */ + *(volatile int*)CM_SHADOW_FREQ_CONFIG1 = 0x70D | (param->m2 << 11); + + /* Wait for Freq_Update to get cleared: CM_SHADOW_FREQ_CONFIG1 */ + while(((*(volatile int*)CM_SHADOW_FREQ_CONFIG1) & 0x1) == 0x1); + + /* Wait for DPLL to Lock : CM_IDLEST_DPLL_CORE */ + wait_on_value((1 << 0), 1, CM_IDLEST_DPLL_CORE, LDELAY); +} + +void omap5_enable_all_clocks(void) +{ + unsigned int rev = omap5_revision(); + u32 wkup_base = CM_WKUPAON_CLKCTRL_REV1; + u32 l4per_base = CM_L4PER_CLKSTCTRL_REV1; + u32 l3init_base = CM_L3INIT_CLKSTCTRL_REV1; + u32 cam_base = CM_CAM_CLKSTCTRL_REV1; + u32 dss_base = CM_DSS_CLKSTCTRL_REV1; + u32 gpu_base = CM_GPU_CLKSTCTRL_REV1; + + if (rev == OMAP5430_ES2_0 || rev == OMAP5432_ES2_0) { + wkup_base = CM_WKUPAON_CLKCTRL_REV2; + l4per_base = CM_L4PER_CLKSTCTRL_REV2; + l3init_base = CM_L3INIT_CLKSTCTRL_REV2; + cam_base = CM_CAM_CLKSTCTRL_REV2; + dss_base = CM_DSS_CLKSTCTRL_REV2; + gpu_base = CM_GPU_CLKSTCTRL_REV2; + } + + /* Enable DSP clocks */ + sr32(CM_DSP_DSP_CLKCTRL, 0, 32, 0x1); + sr32(CM_DSP_CLKSTCTRL, 0, 32, 0x2); + + wait_on_value((1 << 8), 0, CM_DSP_CLKSTCTRL, LDELAY); + + /* ABE clocks */ + sr32(CM_ABE_CLKSTCTRL, 0, 32, 0x3); + sr32(CM_ABE_AESS_CLKCTRL, 0, 32, 0x2); + sr32(CM_ABE_MCPDM_CLKCTRL, 0, 32, 0x2); + sr32(CM_ABE_DMIC_CLKCTRL, 0, 32, 0x2); + sr32(CM_ABE_MCASP_CLKCTRL, 0, 32, 0x2); + sr32(CM_ABE_MCBSP1_CLKCTRL, 0, 32, 0x08000002); + sr32(CM_ABE_MCBSP2_CLKCTRL, 0, 32, 0x08000002); + sr32(CM_ABE_MCBSP3_CLKCTRL, 0, 32, 0x08000002); + sr32(CM_ABE_SLIMBUS1_CLKCTRL, 0, 32, 0x0f02); + sr32(CM_ABE_TIMER5_CLKCTRL, 0, 32, 0x2); + sr32(CM_ABE_TIMER6_CLKCTRL, 0, 32, 0x2); + sr32(CM_ABE_TIMER7_CLKCTRL, 0, 32, 0x2); + sr32(CM_ABE_TIMER8_CLKCTRL, 0, 32, 0x2); + sr32(CM_ABE_WD_TIMER3_CLKCTRL, 0, 32, 0x2); + /* Disable sleep transitions */ + sr32(CM_ABE_CLKSTCTRL, 0, 32, 0x0); + + /* L4PER clocks */ + sr32(l4per_base, 0, 32, 0x2); + sr32(l4per_base + CM_L4PER_TIMER10_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_TIMER10_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_TIMER11_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_TIMER11_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_TIMER2_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_TIMER2_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_TIMER3_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_TIMER3_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_TIMER4_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_TIMER4_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_TIMER9_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_TIMER9_CLKCTRL_OFT, LDELAY); + + /* GPIO clocks */ + sr32(l4per_base + CM_L4PER_GPIO2_CLKCTRL_OFT, 0, 32, 0x1); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_GPIO2_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_GPIO3_CLKCTRL_OFT, 0, 32, 0x1); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_GPIO3_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_GPIO4_CLKCTRL_OFT, 0, 32, 0x1); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_GPIO4_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_GPIO5_CLKCTRL_OFT, 0, 32, 0x1); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_GPIO5_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_GPIO6_CLKCTRL_OFT, 0, 32, 0x1); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_GPIO6_CLKCTRL_OFT, LDELAY); + + sr32(l4per_base + CM_L4PER_HDQ1W_CLKCTRL_OFT, 0, 32, 0x1); + + /* I2C clocks */ + sr32(l4per_base + CM_L4PER_I2C1_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_I2C1_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_I2C2_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_I2C2_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_I2C3_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_I2C3_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_I2C4_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_I2C4_CLKCTRL_OFT, LDELAY); + + /* MCSPI clocks */ + sr32(l4per_base + CM_L4PER_MCSPI1_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_MCSPI1_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_MCSPI2_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_MCSPI2_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_MCSPI3_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_MCSPI3_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_MCSPI4_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_MCSPI4_CLKCTRL_OFT, LDELAY); + + /* MMC3-5 clocks */ + sr32(l4per_base + CM_L4PER_MMC3_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_MMC3_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_MMC4_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_MMC4_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_MMC5_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_MMC5_CLKCTRL_OFT, LDELAY); + + /* UART clocks */ + sr32(l4per_base + CM_L4PER_UART1_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_UART1_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_UART2_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_UART2_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_UART3_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_UART3_CLKCTRL_OFT, LDELAY); + sr32(l4per_base + CM_L4PER_UART4_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, l4per_base + CM_L4PER_UART4_CLKCTRL_OFT, LDELAY); + + /* MMC1-2 clocks */ + sr32(l3init_base + CM_L3INIT_MMC1_CLKCTRL_OFT, 0, 2, 0x2); + sr32(l3init_base + CM_L3INIT_MMC1_CLKCTRL_OFT, 24, 1, 0x1); + sr32(l3init_base + CM_L3INIT_MMC1_CLKCTRL_OFT, 25, 1, 0x0); + sr32(l3init_base + CM_L3INIT_MMC2_CLKCTRL_OFT, 0, 2, 0x2); + sr32(l3init_base + CM_L3INIT_MMC2_CLKCTRL_OFT, 24, 1, 0x1); + sr32(l3init_base + CM_L3INIT_MMC2_CLKCTRL_OFT, 25, 1, 0x0); + + /* WKUP clocks */ + sr32(wkup_base + CM_WKUPAON_GPIO1_CLKCTRL_OFT, 0, 32, 0x1); + wait_on_value((1 << 17)|(1 << 16), 0, wkup_base + CM_WKUPAON_GPIO1_CLKCTRL_OFT, LDELAY); + sr32(wkup_base + CM_WKUPAON_TIMER1_CLKCTRL_OFT, 0, 32, 0x01000002); + wait_on_value((1 << 17)|(1 << 16), 0, wkup_base + CM_WKUPAON_TIMER1_CLKCTRL_OFT, LDELAY); + sr32(wkup_base + CM_WKUPAON_KBD_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, wkup_base + CM_WKUPAON_KBD_CLKCTRL_OFT, LDELAY); + + sr32(CM_DMA_CLKSTCTRL, 0, 32, 0x0); + sr32(CM_EMIF_CLKSTCTRL, 0, 32, 0x3); + sr32(CM_EMIF_EMIF1_CLKCTRL, 0, 32, 0x1); + wait_on_value((1 << 17)|(1 << 16), 0, CM_EMIF_EMIF1_CLKCTRL, LDELAY); + sr32(CM_EMIF_EMIF2_CLKCTRL, 0, 32, 0x1); + wait_on_value((1 << 17)|(1 << 16), 0, CM_EMIF_EMIF2_CLKCTRL, LDELAY); + sr32(CM_C2C_CLKSTCTRL, 0, 32, 0x3); + sr32(CM_L3MAIN2_GPMC_CLKCTRL, 0, 32, 0x1); + wait_on_value((1 << 17)|(1 << 16), 0, CM_L3MAIN2_GPMC_CLKCTRL, LDELAY); + sr32(CM_L3INSTR_L3_MAIN_3_CLKCTRL, 0, 32, 0x1); + wait_on_value((1 << 17)|(1 << 16), 0, CM_L3INSTR_L3_MAIN_3_CLKCTRL, LDELAY); + sr32(CM_L3INSTR_L3_INSTR_CLKCTRL, 0, 32, 0x1); + wait_on_value((1 << 17)|(1 << 16), 0, CM_L3INSTR_L3_INSTR_CLKCTRL, LDELAY); + sr32(CM_L3INSTR_OCP_WP_NOC_CLKCTRL, 0, 32, 0x1); + wait_on_value((1 << 17)|(1 << 16), 0, CM_L3INSTR_OCP_WP_NOC_CLKCTRL, LDELAY); + + /* WDT clocks */ + sr32(wkup_base + CM_WKUPAON_WD_TIMER2_CLKCTRL_OFT, 0, 32, 0x2); + wait_on_value((1 << 17)|(1 << 16), 0, wkup_base + CM_WKUPAON_WD_TIMER2_CLKCTRL_OFT, LDELAY); + + /* Enable Camera clocks */ + sr32(cam_base, 0, 32, 0x3); + sr32(cam_base + CM_CAM_ISS_CLKCTRL_OFT, 0, 32, 0x102); + sr32(cam_base + CM_CAM_FDIF_CLKCTRL_OFT, 0, 32, 0x2); + sr32(cam_base, 0, 32, 0x0); + + /* Enable DSS clocks */ + /* PM_DSS_PWRSTCTRL ON State and LogicState = 1 (Retention) */ + __raw_writel(7, PM_DSS_PWRSTCTRL); /* DSS_PRM */ + + sr32(dss_base, 0, 32, 0x2); + sr32(dss_base + CM_DSS_DSS_CLKCTRL_OFT, 0, 32, 0xf02); + + /* Check for DSS Clocks */ + while ((__raw_readl(dss_base) & 0xF00) != 0xE00) + ; + /* Set HW_AUTO transition mode */ + sr32(dss_base, 0, 32, 0x3); + + /* Enable GPU clocks */ + sr32(gpu_base, 0, 32, 0x2); + sr32(gpu_base + CM_GPU_GPU_CLKCTRL_OFT, 0, 32, 0x2); + + /* Enable hsi/unipro/usb/sata clocks */ + sr32(l3init_base + CM_L3INIT_HSI_CLKCTRL_OFT, 0, 32, 0x1); + sr32(l3init_base + CM_L3INIT_UNIPRO2_CLKCTRL_OFT, 0, 32, 0x2); + sr32(l3init_base + CM_L3INIT_USB_HOST_HS_CLKCTRL_OFT, 0, 32, 0x2); + sr32(l3init_base + CM_L3INIT_USB_TLL_HS_CLKCTRL_OFT, 0, 32, 0x1); + sr32(l3init_base + CM_L3INIT_IEEE1500_2_OCP_CLKCTRL_OFT, 0, 32, 0x2); + sr32(l3init_base + CM_L3INIT_SATA_CLKCTRL_OFT, 0, 32, 0x2); + sr32(l3init_base + CM_L3INIT_OCP2SCP1_CLKCTRL_OFT, 0, 32, 0x1); + sr32(l3init_base + CM_L3INIT_OCP2SCP3_CLKCTRL_OFT, 0, 32, 0x1); + sr32(l3init_base + CM_L3INIT_USB_OTG_SS_CLKCTRL_OFT, 0, 32, 0x1); +} diff --git a/arch/arm/mach-omap/omap5_generic.c b/arch/arm/mach-omap/omap5_generic.c new file mode 100644 index 0000000..debe849 --- /dev/null +++ b/arch/arm/mach-omap/omap5_generic.c @@ -0,0 +1,510 @@ +/* + * (C) Copyright 2013 + * Sam Solutions, + * + * Authors: + * Uladzimir Bely + * Dmitry Lavnikevich + * + * Derived from OMAP4 work + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MIDR_CORTEX_A15_R0P0 0x410FC0F0 + +#define CONTROL_ID_CODE 0x4A002204 + +#define OMAP5430_CONTROL_ID_CODE_ES1_0 0x0B94202F +#define OMAP5432_CONTROL_ID_CODE_ES1_0 0x0B99802F +#define OMAP5430_CONTROL_ID_CODE_ES2_0 0x1B94202F +#define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F + +/* EMIF_L3_CONFIG register value */ +#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0 0x0A0000FF +#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0 0x0A300000 +#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0 0x0A500000 + +void __noreturn reset_cpu(unsigned long addr) +{ + writel(PRM_RSTCTRL_RESET, PRM_RSTCTRL); + + while (1); +} + +#define WATCHDOG_WSPR 0x48 +#define WATCHDOG_WWPS 0x34 + +static void wait_for_command_complete(void) +{ + int pending = 1; + + do { + pending = readl(OMAP54XX_WDT2_BASE + WATCHDOG_WWPS); + } while (pending); +} + +/* EMIF */ +#define EMIF_REVISION 0x0000 +#define EMIF_STATUS 0x0004 +#define EMIF_SDRAM_CONFIG 0x0008 +#define EMIF_SDRAM_CONFIG_2 0x000C +#define EMIF_SDRAM_REFRESH_CONTROL 0x0010 +#define EMIF_SDRAM_REFRESH_CONTROL_SHADOW 0x0014 +#define EMIF_SDRAM_TIMING_1 0x0018 +#define EMIF_SDRAM_TIMING_1_SHADOW 0x001C +#define EMIF_SDRAM_TIMING_2 0x0020 +#define EMIF_SDRAM_TIMING_2_SHADOW 0x0024 +#define EMIF_SDRAM_TIMING_3 0x0028 +#define EMIF_SDRAM_TIMING_3_SHADOW 0x002C +#define EMIF_POWER_MANAGEMENT_CONTROL 0x0038 +#define EMIF_POWER_MANAGEMENT_CONTROL_SHADOW 0x003C +#define EMIF_LPDDR2_MODE_REG_DATA 0x0040 +#define EMIF_LPDDR2_MODE_REG_CONFIG 0x0050 +#define EMIF_OCP_CONFIG 0x0054 +#define EMIF_OCP_CFG_VALUE_1 0x0058 +#define EMIF_OCP_CFG_VALUE_2 0x005C +#define EMIF_PERFORMANCE_COUNTER_1 0x0080 +#define EMIF_PERFORMANCE_COUNTER_2 0x0084 +#define EMIF_PERFORMANCE_COUNTER_CONFIG 0x0088 +#define EMIF_PERFORMANCE_COUNTER_MASTER_REGION_SELECT 0x008C +#define EMIF_PERFORMANCE_COUNTER_TIME 0x0090 +#define EMIF_MISC_REG 0x0094 +#define EMIF_DLL_CALIB_CTRL 0x0098 +#define EMIF_DLL_CALIB_CTRL_SHADOW 0x009c + +#define EMIF_PWR_MGMT_CTRL 0x0038 +#define EMIF_PWR_MGMT_CTRL_SHADOW 0x003c +#define EMIF_READ_IDLECTRL 0x0098 +#define EMIF_READ_IDLECTRL_SHADOW 0x009c +#define EMIF_ZQ_CONFIG 0x00c8 +#define EMIF_TEMP_ALERT_CONFIG 0x00cc +#define EMIF_L3_CONFIG 0x0054 + +#define NUMBER_OF_EMIF_EXT_CTRL_REGISTERS 30 + +#define EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG 0x00C8 + +#define EMIF_DDR_PHY_CTRL_1 0x00e4 +#define EMIF_DDR_PHY_CTRL_1_SHADOW 0x00e8 +#define EMIF_DDR_PHY_CTRL_2 0x00eC +#define EMIF_DDR_EXT_PHY_CTRL_1 0x0200 + +#define CS0 0 +#define CS1 1 + +#define DMM_LISA_MAP_0 0x0040 +#define DMM_LISA_MAP_1 0x0044 +#define DMM_LISA_MAP_2 0x0048 +#define DMM_LISA_MAP_3 0x004C + +#define EMIF_REG_CS1NVMEN_MASK (1 << 30) +#define EMIF_REG_INITREF_DIS_MASK (1 << 31) +#define EMIF_REG_CS_SHIFT 31 +#define EMIF_REG_REFRESH_EN_MASK 0x40000000 +#define EMIF_REG_EBANK_MASK (1 << 3) + +#define MR0_ADDR 0 +#define MR1_ADDR 1 +#define MR2_ADDR 2 +#define MR3_ADDR 3 +#define MR4_ADDR 4 +#define MR10_ADDR 10 +#define MR16_ADDR 16 +#define RL_FINAL 8 + +#define MR16_REF_FULL_ARRAY 0 +#define MR0_DAI_MASK 1 + +#define REF_EN 0x40000000 + +/* defines for MR1 */ +#define MR1_BL4 2 +#define MR1_BL8 3 +#define MR1_BL16 4 + +#define MR1_BT_SEQ 0 +#define BT_INT 1 + +#define MR1_WC 0 +#define MR1_NWC 1 + +#define MR1_NWR3 1 +#define MR1_NWR4 2 +#define MR1_NWR5 3 +#define MR1_NWR6 4 +#define MR1_NWR7 5 +#define MR1_NWR8 6 + +#define MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8 0xc3 + +/* defines for MR2 */ +#define MR2_RL3_WL1 1 +#define MR2_RL4_WL2 2 +#define MR2_RL5_WL2 3 +#define MR2_RL6_WL3 4 + +/* defines for MR10 */ +#define MR10_ZQINIT 0xFF +#define MR10_ZQRESET 0xC3 +#define MR10_ZQCL 0xAB +#define MR10_ZQCS 0x56 + +/* Elpida 2x2Gbit */ +#define SDRAM_CONFIG_INIT 0x80800EB1 +#define DDR_PHY_CTRL_1_INIT 0x849FFFF5 +#define READ_IDLE_CTRL 0x000501FF +#define PWR_MGMT_CTRL 0x4000000f +#define PWR_MGMT_CTRL_OPP100 0x4000000f +#define ZQ_CONFIG 0x500b3215 + +#define CS1_MR(mr) ((mr) | 0x80000000) + +/* CLKCTRL_IDLSET */ +#define MODULE_CLKCTRL_IDLEST_TRANSITIONING 1 +#define MODULE_CLKCTRL_IDLEST_DISABLED 3 +#define MODULE_CLKCTRL_IDLEST_SHIFT 16 +#define MODULE_CLKCTRL_IDLEST_MASK (3 << 16) + + +int omap5_emif_config(u32 base, const struct omap5_ddr_regs *regs) +{ + u32 *ext_phy_ctrl_base; + u32 *emif_ext_phy_ctrl_base; + int i; + + /* Not NVM */ + sr32(base + EMIF_SDRAM_CONFIG_2, 30, 1, 0); + + /* + * Keep REG_INITREF_DIS = 1 to prevent re-initialization of SDRAM + * when EMIF_SDRAM_CONFIG register is written + */ + sr32(base + EMIF_SDRAM_REFRESH_CONTROL, 31, 1, 1); + + /* + * Set the SDRAM_CONFIG and PHY_CTRL for the + * un-locked frequency & default RL + */ + writel(regs->sdram_config_init, base + EMIF_SDRAM_CONFIG); + writel(regs->emif_ddr_phy_ctlr_1_init, base + EMIF_DDR_PHY_CTRL_1); + + ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1_init); + emif_ext_phy_ctrl_base = (u32 *) (base + EMIF_DDR_EXT_PHY_CTRL_1); + + /* Configure external phy control registers */ + for (i = 0; i < NUMBER_OF_EMIF_EXT_CTRL_REGISTERS; i++) { + writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++); + /* Write the shadow register here as well */ + writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++); + } + + writel(MR0_ADDR, base + EMIF_LPDDR2_MODE_REG_CONFIG); + writel(CS1_MR(MR0_ADDR), base + EMIF_LPDDR2_MODE_REG_CONFIG); + while (readl(base + EMIF_LPDDR2_MODE_REG_DATA) & MR0_DAI_MASK); + + writel(MR10_ADDR, base + EMIF_LPDDR2_MODE_REG_CONFIG); + writel(MR10_ZQINIT, base + EMIF_LPDDR2_MODE_REG_DATA); + writel(CS1_MR(MR10_ADDR), base + EMIF_LPDDR2_MODE_REG_CONFIG); + writel(MR10_ZQINIT, base + EMIF_LPDDR2_MODE_REG_DATA); + + /* + * tZQINIT = 1 us + * Enough loops assuming a maximum of 2GHz + */ + sdelay(2000); + + writel(MR1_ADDR, base + EMIF_LPDDR2_MODE_REG_CONFIG); + writel(MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8, base + EMIF_LPDDR2_MODE_REG_DATA); + writel(CS1_MR(MR1_ADDR), base + EMIF_LPDDR2_MODE_REG_CONFIG); + writel(MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8, base + EMIF_LPDDR2_MODE_REG_DATA); + + writel(MR16_ADDR, base + EMIF_LPDDR2_MODE_REG_CONFIG); + writel(MR16_REF_FULL_ARRAY, base + EMIF_LPDDR2_MODE_REG_DATA); + writel(CS1_MR(MR16_ADDR), base + EMIF_LPDDR2_MODE_REG_CONFIG); + writel(MR16_REF_FULL_ARRAY, base + EMIF_LPDDR2_MODE_REG_DATA); + + /* + * Enable refresh along with writing MR2 + * Encoding of RL in MR2 is (RL - 2) + */ + writel(MR2_ADDR | EMIF_REG_REFRESH_EN_MASK, base + EMIF_LPDDR2_MODE_REG_CONFIG); + writel(RL_FINAL - 2, base + EMIF_LPDDR2_MODE_REG_DATA); + writel(CS1_MR(MR2_ADDR) | EMIF_REG_REFRESH_EN_MASK, base + EMIF_LPDDR2_MODE_REG_CONFIG); + writel(RL_FINAL - 2, base + EMIF_LPDDR2_MODE_REG_DATA); + + writel(MR3_ADDR, base + EMIF_LPDDR2_MODE_REG_CONFIG); + writel(0x1, base + EMIF_LPDDR2_MODE_REG_DATA); + writel(CS1_MR(MR3_ADDR), base + EMIF_LPDDR2_MODE_REG_CONFIG); + writel(0x1, base + EMIF_LPDDR2_MODE_REG_DATA); + + + writel(regs->sdram_config, base + EMIF_SDRAM_CONFIG); + writel(regs->emif_ddr_phy_ctlr_1, base + EMIF_DDR_PHY_CTRL_1); + + /* Enable refresh now */ + sr32(base + EMIF_SDRAM_REFRESH_CONTROL, 31, 1, 0); + + /* Emif_update_timings */ + writel(regs->ref_ctrl, base + EMIF_SDRAM_REFRESH_CONTROL_SHADOW); + writel(regs->sdram_tim1, base + EMIF_SDRAM_TIMING_1_SHADOW); + writel(regs->sdram_tim2, base + EMIF_SDRAM_TIMING_2_SHADOW); + writel(regs->sdram_tim3, base + EMIF_SDRAM_TIMING_3_SHADOW); + + writel(0xF0F0, base + EMIF_PWR_MGMT_CTRL); + writel(0xF0F0, base + EMIF_PWR_MGMT_CTRL_SHADOW); + writel(regs->read_idle_ctrl, base + EMIF_READ_IDLECTRL_SHADOW); + writel(regs->zq_config, base + EMIF_ZQ_CONFIG); + writel(regs->temp_alert_config, base + EMIF_TEMP_ALERT_CONFIG); + writel(regs->emif_ddr_phy_ctlr_1, base + EMIF_DDR_PHY_CTRL_1_SHADOW); + + writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0, base + EMIF_L3_CONFIG); + + return 0; +} + +static inline void wait_for_clk_enable(u32 *clkctrl_addr) +{ + u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED; + u32 bound = LDELAY; + + while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) || + (idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) { + + clkctrl = readl(clkctrl_addr); + idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >> + MODULE_CLKCTRL_IDLEST_SHIFT; + if (--bound == 0) { + debug("Clock enable failed for 0x%p idlest 0x%x\n", + clkctrl_addr, clkctrl); + return; + } + } +} + +static unsigned int cortex_a15_rev(void) +{ + unsigned int rev; + + /* Read Main ID Register (MIDR) */ + asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (rev)); + + return rev; +} + +unsigned int omap5_revision(void) +{ + unsigned int rev = cortex_a15_rev(); + + switch(rev) { + case MIDR_CORTEX_A15_R0P0: + switch(readl(CONTROL_ID_CODE)) { + case OMAP5430_CONTROL_ID_CODE_ES1_0: + return OMAP5430_ES1_0; + break; + case OMAP5430_CONTROL_ID_CODE_ES2_0: + return OMAP5430_ES2_0; + break; + case OMAP5432_CONTROL_ID_CODE_ES1_0: + return OMAP5432_ES1_0; + break; + case OMAP5432_CONTROL_ID_CODE_ES2_0: + return OMAP5432_ES2_0; + break; + default: + return OMAP5430_ES1_0; + break; + } + default: + return OMAP543X_SILICON_ID_INVALID; + break; + } +} + +void omap5_ddr_init(const struct omap5_ddr_regs *ddr_regs, const struct dpll_param *core) +{ + /* DMM Configuration */ + writel(0xFF020100, OMAP54XX_DMM_BASE + DMM_LISA_MAP_3); + writel(0x80740300, OMAP54XX_DMM_BASE + DMM_LISA_MAP_2); + writel(0x0, OMAP54XX_DMM_BASE + DMM_LISA_MAP_1); + writel(0x0, OMAP54XX_DMM_BASE + DMM_LISA_MAP_0); + + writel(0xFF020100, OMAP54XX_MA_BASE + DMM_LISA_MAP_3); + writel(0x80740300, OMAP54XX_MA_BASE + DMM_LISA_MAP_2); + writel(0x0, OMAP54XX_MA_BASE + DMM_LISA_MAP_1); + writel(0x0, OMAP54XX_MA_BASE + DMM_LISA_MAP_0); + + /* + * DDR needs to be initialised @ 19.2 MHz + * So put core DPLL in bypass mode + * Configure the Core DPLL but don't lock it + */ + omap5_configure_core_dpll_no_lock(core); + + omap5_emif_config(OMAP54XX_EMIF1_BASE, ddr_regs); + omap5_emif_config(OMAP54XX_EMIF2_BASE, ddr_regs); + + /* Put EMIF clock domain in sw wakeup mode */ + sr32(CM_EMIF_CLKSTCTRL, 0, 2, 2); + + wait_for_clk_enable((u32*)CM_EMIF_EMIF1_CLKCTRL); + wait_for_clk_enable((u32*)CM_EMIF_EMIF2_CLKCTRL); + + writel(0x00001709, CM_SHADOW_FREQ_CONFIG1); + + if (!wait_on_value(1, 0, CM_SHADOW_FREQ_CONFIG1, LDELAY)) { + debug("FREQ UPDATE procedure failed!!"); + hang(); + } +} + +void omap5_power_i2c_send(u32 r) +{ + u32 val; + + writel(r, OMAP54XX_PRM_VC_VAL_BYPASS); + + val = readl(OMAP54XX_PRM_VC_VAL_BYPASS); + val |= 0x1000000; + writel(val, OMAP54XX_PRM_VC_VAL_BYPASS); + + while (readl(OMAP54XX_PRM_VC_VAL_BYPASS) & 0x1000000) + ; + + val = readl(OMAP54XX_PRM_IRQSTATUS_MPU); + writel(val, OMAP54XX_PRM_IRQSTATUS_MPU); +} + +/* Shutdown watchdog */ +static int watchdog_init(void) +{ + void __iomem *wd2_base = (void *)OMAP54XX_WDT2_BASE; + + writel(WD_UNLOCK1, wd2_base + WATCHDOG_WSPR); + wait_for_command_complete(); + writel(WD_UNLOCK2, wd2_base + WATCHDOG_WSPR); + + return 0; +} +late_initcall(watchdog_init); + +static int omap_vector_init(void) +{ + /* + * omap4 usbboot interfaces with the omap4 ROM to reuse the USB port + * used for booting. + * The ROM code uses interrupts for the transfers, so do not modify the + * interrupt vectors in this case. + */ + if (omap5_bootsrc() != OMAP_BOOTSRC_USB1) { + __asm__ __volatile__ ( + "mov r0, #0;" + "mcr p15, #0, r0, c12, c0, #0;" + : + : + : "r0" + ); + } + + return 0; +} +core_initcall(omap_vector_init); + +#define OMAP5_TRACING_VECTOR3 0x4031f048 + +enum omap_boot_src omap5_bootsrc(void) +{ + u32 bootsrc = readl(OMAP5_TRACING_VECTOR3); + + if (bootsrc & (1 << 5)) + return OMAP_BOOTSRC_MMC1; + if (bootsrc & (1 << 3)) + return OMAP_BOOTSRC_NAND; + if (bootsrc & (1<<21)) + return OMAP_BOOTSRC_USB1; + return OMAP_BOOTSRC_UNKNOWN; +} + +/* Scaling vcore functions are taken from u-boot */ +void do_scale_vcore(u32 vcore_reg, u32 volt_mv) +{ + u32 temp, offset_code; + u32 step = 10000; /* 10 mV represented in uV */; + + offset_code = (volt_mv * 1000 - SMPS_BASE_VOLT_UV + step - 1) / step + 6; + + temp = SMPS_I2C_SLAVE_ADDR | + (vcore_reg << OMAP54XX_PRM_VC_VAL_BYPASS_REGADDR_SHIFT) | + (offset_code << OMAP54XX_PRM_VC_VAL_BYPASS_DATA_SHIFT) | + OMAP54XX_PRM_VC_VAL_BYPASS_VALID_BIT; + writel(temp, OMAP54XX_PRM_VC_VAL_BYPASS); + if (!wait_on_value(OMAP54XX_PRM_VC_VAL_BYPASS_VALID_BIT, 0, + OMAP54XX_PRM_VC_VAL_BYPASS, LDELAY)) { + debug("Scaling voltage failed for 0x%x\n", vcore_reg); + } +} + +void omap5_scale_vcores(void) +{ + writel(0x150e, OMAP54XX_PRM_VC_CFG_I2C_CLK); + writel(0, OMAP54XX_PRM_VC_CFG_I2C_MODE); + + /* Palmas settings */ + do_scale_vcore(SMPS_REG_ADDR_12_MPU, VDD_MPU); + do_scale_vcore(SMPS_REG_ADDR_45_IVA, VDD_MM); + do_scale_vcore(SMPS_REG_ADDR_8_CORE, VDD_CORE); +} + +void omap5_do_set_mux(u32 base, struct pad_conf_entry const *array, int size) +{ + int i; + struct pad_conf_entry *pad = (struct pad_conf_entry *) array; + + for (i = 0; i < size; i++, pad++) + writew(pad->val, base + pad->offset); +} + +/* GPMC timing for OMAP4 nand device */ +const struct gpmc_config omap5_nand_cfg = { + .cfg = { + 0x00000800, /* CONF1 */ + 0x00050500, /* CONF2 */ + 0x00040400, /* CONF3 */ + 0x03000300, /* CONF4 */ + 0x00050808, /* CONF5 */ + 0x00000000, /* CONF6 */ + }, + /* GPMC address map as small as possible */ + .base = 0x28000000, + .size = GPMC_SIZE_16M, +}; + +static int omap5_gpio_init(void) +{ + add_generic_device("omap-gpio", 0, NULL, OMAP54XX_GPIO1_BASE, + 0xf00, IORESOURCE_MEM, NULL); + add_generic_device("omap-gpio", 1, NULL, OMAP54XX_GPIO2_BASE, + 0xf00, IORESOURCE_MEM, NULL); + add_generic_device("omap-gpio", 2, NULL, OMAP54XX_GPIO3_BASE, + 0xf00, IORESOURCE_MEM, NULL); + add_generic_device("omap-gpio", 3, NULL, OMAP54XX_GPIO4_BASE, + 0xf00, IORESOURCE_MEM, NULL); + add_generic_device("omap-gpio", 4, NULL, OMAP54XX_GPIO5_BASE, + 0xf00, IORESOURCE_MEM, NULL); + add_generic_device("omap-gpio", 5, NULL, OMAP54XX_GPIO6_BASE, + 0xf00, IORESOURCE_MEM, NULL); + + return 0; +} +coredevice_initcall(omap5_gpio_init); diff --git a/arch/arm/mach-omap/omap_generic.c b/arch/arm/mach-omap/omap_generic.c index 580ed3e..ca3e553 100644 --- a/arch/arm/mach-omap/omap_generic.c +++ b/arch/arm/mach-omap/omap_generic.c @@ -26,6 +26,8 @@ enum omap_boot_src omap_bootsrc(void) return omap3_bootsrc(); #elif defined(CONFIG_ARCH_OMAP4) return omap4_bootsrc(); +#elif defined(CONFIG_ARCH_OMAP5) + return omap5_bootsrc(); #elif defined(CONFIG_ARCH_AM33XX) return am33xx_bootsrc(); #endif diff --git a/arch/arm/mach-omap/s32k_clksource.c b/arch/arm/mach-omap/s32k_clksource.c index 7def8b1..0377e0d 100644 --- a/arch/arm/mach-omap/s32k_clksource.c +++ b/arch/arm/mach-omap/s32k_clksource.c @@ -27,13 +27,18 @@ #include #include #include +#include #include #include #include #include /** Sync 32Khz Timer registers */ +#ifdef CONFIG_ARCH_OMAP5 +#define S32K_CR 0x30 +#else #define S32K_CR 0x10 +#endif #define S32K_FREQUENCY 32768 static void __iomem *timerbase; @@ -73,6 +78,8 @@ static int s32k_clocksource_init(void) timerbase = (void *)OMAP3_32KTIMER_BASE; else if (IS_ENABLED(CONFIG_ARCH_OMAP4)) timerbase = (void *)OMAP44XX_32KTIMER_BASE; + else if (IS_ENABLED(CONFIG_ARCH_OMAP5)) + timerbase = (void *)OMAP54XX_32KTIMER_BASE; else BUG(); diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig index 9558f28..5aee417 100644 --- a/drivers/mci/Kconfig +++ b/drivers/mci/Kconfig @@ -67,7 +67,7 @@ config MCI_IMX_ESDHC_PIO config MCI_OMAP_HSMMC bool "OMAP HSMMC" - depends on ARCH_OMAP4 || ARCH_OMAP3 || ARCH_AM33XX + depends on ARCH_OMAP5 || ARCH_OMAP4 || ARCH_OMAP3 || ARCH_AM33XX help Enable this entry to add support to read and write SD cards on both OMAP3 and OMAP4 based systems. -- 1.8.1.5 -- With regards, Uladzimir Bely. _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox