From: Vikram Narayanan <vikram186@gmail.com>
To: "barebox@lists.infradead.org" <barebox@lists.infradead.org>
Cc: Juergen Beisert <jbe@pengutronix.de>
Subject: Unable to Boot from NAND on Mini2440
Date: Sat, 18 May 2013 16:35:46 +0530 [thread overview]
Message-ID: <5197608A.40707@gmail.com> (raw)
Hello,
I followed the instructions here
<http://barebox.org/documentation/barebox-2011.04.0/mini2440.html>
After writing to NAND, I switched the boot mode to NAND and did a reset.
Nothing comes up on the prompt. I tried to verify the 'write', by a
'nand_boot_test'. That works. Please find the log below. I'm on the
latest master.
--- start log ---
Supervivi> go 0x31000000
go to 0x31000000
argument 0 = 0x00000000
argument 1 = 0x00000000
argument 2 = 0x00000000
argument 3 = 0x00000000
barebox 2013.05.0-00126-g19bc427 #4 Sat May 18 15:53:01 IST 2013
Board: Mini 2440
nand: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V
8-bit), page size: 2048, OOB size: 64
dm9000 dm90000: Found DM9000E at i/o: 0x20000300
mdio_bus: miibus0: probed
s3c_mci s3c_mci0: registered as s3c_mci0
malloc space: 0x31bf8000 -> 0x31ff7fff (size 4 MiB)
refclk: 12000 kHz
mpll: 405000 kHz
upll: 48000 kHz
fclk: 405000 kHz
hclk: 101250 kHz
pclk: 50625 kHz
SDRAM1: CL4@101MHz
SDRAM2: CL4@101MHz
envfs: wrong magic on /dev/env0
no valid environment found on /dev/env0. Using default environment
running /env/bin/init...
set parameter: Invalid argument
Hit any key to stop autoboot: 3
mini2440:/ eth0.ipaddr=192.168.1.240
mini2440:/ eth0.netmask=255.255.255.0
mini2440:/ eth0.serverip=192.168.1.14
mini2440:/ erase /dev/nand0.barebox.bb
mini2440:/ tftp barebox.bin /dev/nand0.barebox.bb
warning: No MAC address set. Using random address F2:08:F4:9F:14:99
100Mbps full duplex link detected
###############
mini2440:/ nand_boot_test 0x32000000 0x40000
mini2440:/ go 0x32000000
## Starting application at 0x32000000 ...
barebox 2013.05.0-00126-g19bc427 #4 Sat May 18 15:53:01 IST 2013
Board: Mini 2440
nand: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V
8-bit), page size: 2048, OOB size: 64
dm9000 dm90000: Found DM9000E at i/o: 0x20000300
mdio_bus: miibus0: probed
s3c_mci s3c_mci0: registered as s3c_mci0
malloc space: 0x31bf8000 -> 0x31ff7fff (size 4 MiB)
refclk: 12000 kHz
mpll: 405000 kHz
upll: 48000 kHz
fclk: 405000 kHz
hclk: 101250 kHz
pclk: 50625 kHz
SDRAM1: CL4@101MHz
SDRAM2: CL4@101MHz
envfs: wrong magic on /dev/env0
no valid environment found on /dev/env0. Using default environment
running /env/bin/init...
set parameter: Invalid argument
Hit any key to stop autoboot: 3
mini2440:/
--- end log ----
Any idea on what goes wrong?
Thanks,
Vikram
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2013-05-18 11:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-18 11:05 Vikram Narayanan [this message]
2013-05-20 18:56 ` Juergen Beisert
2013-05-27 0:37 ` Vikram Narayanan
2013-05-27 7:26 ` Juergen Beisert
2013-05-21 7:13 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5197608A.40707@gmail.com \
--to=vikram186@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=jbe@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox