From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from lvps83-169-36-49.dedicated.hosteurope.de ([83.169.36.49] helo=knowtrek.com) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1UmgKp-0007pl-Ak for barebox@lists.infradead.org; Wed, 12 Jun 2013 08:23:16 +0000 Message-ID: <51B82FD8.30108@knowtrek.com> Date: Wed, 12 Jun 2013 10:22:48 +0200 From: Adam Furmanczuk MIME-Version: 1.0 References: <51B0B2D6.3030407@knowtrek.com> <51B5C56C.4050801@knowtrek.com> <51B6066A.5020801@knowtrek.com> <1370884028.154515180@f150.mail.ru> <51B60B95.8020506@knowtrek.com> <20130610172901.GN32299@pengutronix.de> <51B8113F.2050207@knowtrek.com> <51B82114.7080004@knowtrek.com> <20130612080747.GV32299@pengutronix.de> In-Reply-To: <20130612080747.GV32299@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: how to flash barebox and set root variable? - barebox is gone :( To: Sascha Hauer Cc: barebox@lists.infradead.org -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 12.06.2013 10:07, Sascha Hauer wrote: > On Wed, Jun 12, 2013 at 09:19:48AM +0200, Adam Furmanczuk wrote: >> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 >> >> On 12.06.2013 08:12, Adam Furmanczuk wrote: >>> ********* *POCZATEK CZESCI SZYFROWANEJ / PODPISANEJ* ********* >>> >>> On 10.06.2013 19:29, Sascha Hauer wrote: >>>>> On Mon, Jun 10, 2013 at 07:23:33PM +0200, Adam Furmanczuk >>>>> wrote: >>>>>>> On 10.06.2013 19:07, Alexander Shiyan wrote: >>>>>>>>>>> flashing barebox.bin to /dev/nor0.kernel >>>>>>>>>>>>> Unknown command 'tftp' - try 'help' >>>>>>>>> Seems tftp command is not compiled in. Ensure that >>>>>>>>> you have CONFIG_CMD_TFTP in your .config. >>>>>>> Thanks Alexander, >>>>>>> >>>>>>> but my barebox binary is gone . Have been a bit >>>>>>> careles... I would need to flash the binary over my OCD >>>>>>> USB controller, but do not realy have a clue how to do >>>>>>> this. I am waiting for support reply for this ICnova >>>>>>> iMX536 SODIMM module, they should give me some steps >>>>>>> how to proceed. >>>>> [...] CONFIG_ARCH_IMX_USBLOADER in a recent barebox. After >>>>> compiling you will have scripts/imx/imx-usb-loader >>> Hi Sascha, >>> >>> I have included the option: CONFIG_ARCH_IMX_USBLOADER=y then >>> run make clean and then make again, but there is no such file, >>> tried to search recursively for similar file in barebox top >>> directory with: find ./ -iname \*usb-loader\* >>> >> >> My bad, i got the latest git snaphot (699-bcc9) and there is >> USBLOADER.. have still some issues with compiling it. There is >> "memory bank" error [1]. Have seen there was a patch recently, >> but do not know the option to enable/disable > > When CONFIG_ARCH_IMX_USBLOADER is enabled in your config you can > do: > > make scripts/imx/ > > This should build the tool only. > In the current 699-bcc9 branch i run: make ARCH=arm freescale_mx53_loco_defconfig than i edit the .config by hand and set CONFIG_ARCH_IMX_USBLOADER=y when running: make scripts/imx it tells me no goals. nothing to do. I run gcc on your script file directly, but the libush.h is misssing I should get it from the MX53 loco project? Thanks for help, Adam -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAlG4L9gACgkQefEEI87R1DfaYACghktQZlZhmJ2hM7QNyX/g3bL7 ebcAoMvwQGN4jzzGEh1U1HpxBOPEwHAq =dP3D -----END PGP SIGNATURE----- _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox