From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from out203-205-251-82.mail.qq.com ([203.205.251.82] helo=qq.com) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jJuoo-0005Tr-Ix for barebox@lists.infradead.org; Thu, 02 Apr 2020 08:03:20 +0000 From: you xiaojie <84640926@qq.com> Date: Thu, 02 Apr 2020 16:02:57 +0800 Message-ID: <52873740.qfR1zLsytf@allan-home> In-Reply-To: <20200402074154.GF27288@pengutronix.de> References: <1833400.Y7EmvgfLYE@allan-home> <2790507.TRZ85U3XWg@allan-home> <20200402074154.GF27288@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: bug report: fail to boot barebox in marvell 6281 board To: barebox@lists.infradead.org On Thursday, April 2, 2020 3:41:54 PM CST Sascha Hauer wrote: > On Thu, Apr 02, 2020 at 03:03:41PM +0800, you xiaojie wrote: > > the debugging message. > > > > allan@allan-home:/media/allan/c6293bbf-6fa1-49ca-9b01-24855a810e0e/barebox > > - > > test/barebox$ ./scripts/kwboot -b ./images/barebox-huanshuo-hs50a.img -n > > 15 -B 115200 -t /dev/ttyUSB0 > > Sending boot message. Please reboot the target... > > Got expected NAKs > > Sending boot image... > > > > 86 % > > [......................................................................] > > 89 % > > [......................................................................] > > 91 % > > [......................................................................] > > 93 % > > [......................................................................] > > 96 % > > [......................................................................] > > 98 % [.............................................] > > > > [Type Ctrl-\ + c to quit] > > uncompress.c: memory at 0x00000000, size 0x20000000 > > uncompress.c: enabling MMU, ttb @ 0x1ffe4000 > > uncompress.c: uncompressing barebox binary at 0x010053e0 (size 0x00057dfe) > > to 0x1fe00000 (uncompressed size: 0x000a4ee0) > > uncompress.c: jumping to uncompressed image at 0x1fe00000 > > start.c: memory at 0x00000000, size 0x20000000 > > start.c: found DTB in boarddata, copying to 0x1fdfcc40 > > start.c: initializing malloc pool at 0x0fefe620 (size 0x0fefe620) > > start.c: starting barebox... > > initcall-> globalvar_init+0x0/0x48 > > This looks all perfectly fine until here. I have no idea what goes wrong > here. You need a binary.0 file for this board, right? Are you sure that > works? Did you extract it from some working U-Boot? > It might also be a toolchain related issue. Which toolchain are you > using? > > Sascha binary.0? no I don't think so.for armada 370, need. for kirkwood,kwbimage.cfg complete such memory initialisation work. so there is no need binary.0 file. that is to see in images/Makefile. this is kwbimage from uboot setting registry for mem init. also in 6281 datasheet (publicly available on internet) # SPDX-License-Identifier: GPL-2.0+ # # (C) Copyright 2009 # Marvell Semiconductor # Written-by: Siddarth Gore # Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # # Boot Media configurations BOOT_FROM nand NAND_ECC_MODE default NAND_PAGE_SIZE 0x0800 # SOC registers configuration using bootrom header extension # Maximum KWBIMAGE_MAX_CONFIG configurations allowed # Configure RGMII-0/1 interface pad voltage to 1.8V DATA 0xFFD100e0 0x1b1b9b9b #Dram initalization for SINGLE x16 CL=5 @ 400MHz DATA 0xFFD01400 0x43000c30 # DDR Configuration register # bit13-0: 0xc30 (3120 DDR2 clks refresh rate) # bit23-14: zero # bit24: 1= enable exit self refresh mode on DDR access # bit25: 1 required # bit29-26: zero # bit31-30: 01 DATA 0xFFD01404 0x37543000 # DDR Controller Control Low # bit 4: 0=addr/cmd in smame cycle # bit 5: 0=clk is driven during self refresh, we don't care for APX # bit 6: 0=use recommended falling edge of clk for addr/cmd # bit14: 0=input buffer always powered up # bit18: 1=cpu lock transaction enabled # bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 # bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM # bit30-28: 3 required # bit31: 0=no additional STARTBURST delay DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1) # bit3-0: TRAS lsbs # bit7-4: TRCD # bit11- 8: TRP # bit15-12: TWR # bit19-16: TWTR # bit20: TRAS msb # bit23-21: 0x0 # bit27-24: TRRD # bit31-28: TRTP DATA 0xFFD0140C 0x00000a33 # DDR Timing (High) # bit6-0: TRFC # bit8-7: TR2R # bit10-9: TR2W # bit12-11: TW2W # bit31-13: zero required DATA 0xFFD01410 0x000000cc # DDR Address Control # bit1-0: 01, Cs0width=x8 # bit3-2: 10, Cs0size=1Gb # bit5-4: 01, Cs1width=x8 # bit7-6: 10, Cs1size=1Gb # bit9-8: 00, Cs2width=nonexistent # bit11-10: 00, Cs2size =nonexistent # bit13-12: 00, Cs3width=nonexistent # bit15-14: 00, Cs3size =nonexistent # bit16: 0, Cs0AddrSel # bit17: 0, Cs1AddrSel # bit18: 0, Cs2AddrSel # bit19: 0, Cs3AddrSel # bit31-20: 0 required DATA 0xFFD01414 0x00000000 # DDR Open Pages Control # bit0: 0, OpenPage enabled # bit31-1: 0 required DATA 0xFFD01418 0x00000000 # DDR Operation # bit3-0: 0x0, DDR cmd # bit31-4: 0 required DATA 0xFFD0141C 0x00000C52 # DDR Mode # bit2-0: 2, BurstLen=2 required # bit3: 0, BurstType=0 required # bit6-4: 4, CL=5 # bit7: 0, TestMode=0 normal # bit8: 0, DLL reset=0 normal # bit11-9: 6, auto-precharge write recovery ???????????? # bit12: 0, PD must be zero # bit31-13: 0 required DATA 0xFFD01420 0x00000040 # DDR Extended Mode # bit0: 0, DDR DLL enabled # bit1: 0, DDR drive strenght normal # bit2: 0, DDR ODT control lsd (disabled) # bit5-3: 000, required # bit6: 1, DDR ODT control msb, (disabled) # bit9-7: 000, required # bit10: 0, differential DQS enabled # bit11: 0, required # bit12: 0, DDR output buffer enabled # bit31-13: 0 required DATA 0xFFD01424 0x0000F17F # DDR Controller Control High # bit2-0: 111, required # bit3 : 1 , MBUS Burst Chop disabled # bit6-4: 111, required # bit7 : 0 # bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz # bit9 : 0 , no half clock cycle addition to dataout # bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals # bit11 : 0 , 1/4 clock cycle skew disabled for write mesh # bit15-12: 1111 required # bit31-16: 0 required DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size # bit0: 1, Window enabled # bit1: 0, Write Protect disabled # bit3-2: 00, CS0 hit selected # bit23-4: ones, required # bit31-24: 0x0F, Size (i.e. 256MB) DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb DATA 0xFFD0150C 0x0FFFFFF5 # CS[1]n Size 256Mb Window enabled for CS1 DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low) DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) # bit1-0: 00, ODT0 controlled by ODT Control (low) register above # bit3-2: 01, ODT1 active NEVER! # bit31-4: zero, required DATA 0xFFD0149C 0x0000E803 # CPU ODT Control DATA 0xFFD01480 0x00000001 # DDR Initialization Control #bit0=1, enable DDR init upon this register write what is the register's base mem address for uboot or barebox? where to define 0xffd00000 base address? _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox